Kiran Solanki

Assoc Professor

  • 2204 Citations
  • 26 h-Index
20032021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2020

Towards dynamic tension-compression asymmetry and relative deformation mechanisms in magnesium

Kale, C., Turnage, S., Avery, D. Z., El Kadiri, H., Jordon, J. B. & Solanki, K. N., Mar 2020, In : Materialia. 9, 100543.

Research output: Contribution to journalArticle

Open Access
2019

Nanotechnology enabled design of a structural material with extreme strength as well as thermal and electrical properties

Rajagopalan, M., Darling, K. A., Kale, C., Turnage, S. A., Koju, R. K., Hornbuckle, B. C., Mishin, Y. & Solanki, K. N., Dec 2019, In : Materials Today. 31, p. 10-20 11 p.

Research output: Contribution to journalArticle

Oxygen effects on crystal plasticity of Titanium: A multiscale calibration and validation framework

Kale, C., Garg, P., Bazehhour, B. G., Srinivasan, S., Bhatia, M. A., Peralta, P. & Solanki, K., Sep 1 2019, In : Acta Materialia. 176, p. 19-32 14 p.

Research output: Contribution to journalArticle

1 Scopus citations

Revealing cryogenic mechanical behavior and mechanisms in a microstructurally-stable, immiscible nanocrystalline alloy

Hornbuckle, B. C., Kale, C., Srinivasan, S., Luckenbaugh, T. L., Solanki, K. & Darling, K. A., Feb 1 2019, In : Scripta Materialia. 160, p. 33-38 6 p.

Research output: Contribution to journalArticle

2 Scopus citations

Revealing the atomistic nature of dislocation-precipitate interactions in Al-Cu alloys

Adlakha, I., Garg, P. & Solanki, K. N., Aug 15 2019, In : Journal of Alloys and Compounds. 797, p. 325-333 9 p.

Research output: Contribution to journalArticle

1 Scopus citations

Thermo-mechanical strengthening mechanisms in a stable nanocrystalline binary alloy – A combined experimental and modeling study

Kale, C., Turnage, S., Garg, P., Adlakha, I., Srinivasan, S., Hornbuckle, B. C., Darling, K. & Solanki, K., Feb 5 2019, In : Materials and Design. 163, 107551.

Research output: Contribution to journalArticle

2 Scopus citations

Uncovering the influence of metallic and non-metallic impurities on the ideal shear strength and ductility of Ti: An ab-initio study

Garg, P., Bhatia, M. A. & Solanki, K., Jun 5 2019, In : Journal of Alloys and Compounds. 788, p. 413-421 9 p.

Research output: Contribution to journalArticle

3 Scopus citations
2018

An Insight into Machining of Thermally Stable Bulk Nanocrystalline Metals

Hammond, V. H., Luckenbaugh, T. L., Aniska, M., Gray, D. M., Smeltzer, J. A., Hornbuckle, B. C., Marvel, C. J., Solanki, K., Schmitz, T. & Darling, K. A., Dec 2018, In : Advanced Engineering Materials. 20, 12, 1800405.

Research output: Contribution to journalArticle

2 Scopus citations

Anomalous mechanical behavior of nanocrystalline binary alloys under extreme conditions

Turnage, S. A., Rajagopalan, M., Darling, K. A., Garg, P., Kale, C., Bazehhour, B. G., Adlakha, I., Hornbuckle, B. C., Williams, C. L., Peralta, P. & Solanki, K., Dec 1 2018, In : Nature Communications. 9, 1, 2699.

Research output: Contribution to journalArticle

8 Scopus citations

Atomistic modeling of capillary-driven grain boundary motion in Cu-Ta alloys

Koju, R. K., Darling, K. A., Solanki, K. & Mishin, Y., Apr 15 2018, In : Acta Materialia. 148, p. 311-319 9 p.

Research output: Contribution to journalArticle

12 Scopus citations

Effect of mechanical loading on the galvanic corrosion behavior of a magnesium-steel structural joint

Adlakha, I., Bazehhour, B. G., Muthegowda, N. C. & Solanki, K., Jan 1 2018, (Accepted/In press) In : Corrosion Science.

Research output: Contribution to journalArticle

7 Scopus citations

Effect of solutes on ideal shear resistance and electronic properties of magnesium: A first-principles study

Garg, P., Adlakha, I. & Solanki, K., Jul 1 2018, In : Acta Materialia. 153, p. 327-335 9 p.

Research output: Contribution to journalArticle

8 Scopus citations

Influence of variable processing conditions on the quasi-static and dynamic behaviors of resistance spot welded aluminum 6061-T6 sheets

Turnage, S. A., Darling, K. A., Rajagopalan, M., Whittington, W. R., Tschopp, M. A., Peralta, P. & Solanki, K., May 2 2018, In : Materials Science and Engineering A. 724, p. 509-517 9 p.

Research output: Contribution to journalArticle

4 Scopus citations

In Situ Alloying of Thermally Conductive Polymer Composites by Combining Liquid and Solid Metal Microadditives

Ralphs, M. I., Kemme, N., Vartak, P. B., Joseph, E., Tipnis, S., Turnage, S., Solanki, K., Wang, R. & Rykaczewski, K., Jan 17 2018, In : ACS Applied Materials and Interfaces. 10, 2, p. 2083-2092 10 p.

Research output: Contribution to journalArticle

26 Scopus citations

Microstructure and dynamic strain aging behavior in oxide dispersion strengthened 91Fe-8Ni-1Zr (at%) alloy

Barton, D. J., Kale, C., Hornbuckle, B. C., Darling, K. A., Solanki, K. & Thompson, G. B., May 16 2018, In : Materials Science and Engineering A. 725, p. 503-509 7 p.

Research output: Contribution to journalArticle

5 Scopus citations

On the roles of stress-triaxiality and strain-rate on the deformation behavior of AZ31 magnesium alloys

Kale, C., Rajagopalan, M., Turnage, S., Hornbuckle, B., Darling, K., Mathaudhu, S. N. & Solanki, K., Feb 1 2018, In : Materials Research Letters. 6, 2, p. 152-158 7 p.

Research output: Contribution to journalArticle

10 Scopus citations

Revealing the role of nitrogen on hydride nucleation and stability in pure niobium using first-principles calculations

Garg, P., Balachandran, S., Adlakha, I., Lee, P. J., Bieler, T. R. & Solanki, K., Oct 12 2018, In : Superconductor Science and Technology. 31, 11, 115007.

Research output: Contribution to journalArticle

4 Scopus citations
2017

A thermodynamic and kinetic-based grain growth model for nanocrystalline materials: Parameter sensitivity analysis and model extension

Tschopp, M. A., Hernández-Rivera, E., Atwater, M. A., Solanki, K. & Darling, K. A., Apr 15 2017, In : Computational Materials Science. 131, p. 250-265 16 p.

Research output: Contribution to journalArticle

1 Scopus citations

Dislocation core properties of β-tin: A first-principles study

Bhatia, M. A., Azarnoush, M., Adlakha, I., Lu, G. & Solanki, K., Mar 1 2017, In : Modelling and Simulation in Materials Science and Engineering. 25, 2, 025014.

Research output: Contribution to journalArticle

2 Scopus citations

Energetics of Hydrogen Segregation to α-Fe Grain Boundaries for Modeling Stress Corrosion Cracking

Rajagopalan, M., Adlakha, I., Tschopp, M. A. & Solanki, K., May 25 2017, (Accepted/In press) In : JOM. p. 1-6 6 p.

Research output: Contribution to journalArticle

1 Scopus citations

He–V cluster nucleation and growth in α-Fe grain boundaries

Tschopp, M. A., Gao, F. & Solanki, K., Feb 1 2017, In : Acta Materialia. 124, p. 544-555 12 p.

Research output: Contribution to journalArticle

13 Scopus citations

Microstructural evolution in a nanocrystalline Cu-Ta alloy: A combined in-situ TEM and atomistic study

Rajagopalan, M., Darling, K., Turnage, S., Koju, R. K., Hornbuckle, B., Mishin, Y. & Solanki, K., Jan 5 2017, In : Materials and Design. 113, p. 178-185 8 p.

Research output: Contribution to journalArticle

24 Scopus citations

Nanocrystalline material with anomalous modulus of resilience and springback effect

Darling, K. A., Kale, C., Turnage, S., Hornbuckle, B. C., Luckenbaugh, T. L., Grendahl, S. & Solanki, K., Dec 2017, In : Scripta Materialia. 141, p. 36-40 5 p.

Research output: Contribution to journalArticle

7 Scopus citations

Role of Static and Cyclic Deformation on the Corrosion Behavior of a Magnesium-Steel Structural Joint

Gholami Bazehhour, B., Adlakha, I. & Solanki, K., Jun 26 2017, (Accepted/In press) In : JOM. p. 1-7 7 p.

Research output: Contribution to journalArticle

2 Scopus citations

Subcritical crack growth and crack tip driving forces in relation to material resistance

Sadananda, K., Solanki, K. & Vasudevan, A. K., Jul 12 2017, (Accepted/In press) In : Unknown Journal.

Research output: Contribution to journalArticle

3 Scopus citations

Water permeation and corrosion resistance of single- and two-component hydrophobic polysiloxane barrier coatings

Sun, X., Turnage, S., Iezzi, E. B., Yang, Y., Chang, B., Muthegowda, N. C., Balijepalli, S. K., Dhuyvetter, N., Wang, L., Solanki, K. & Rykaczewski, K., Nov 1 2017, In : Journal of Coatings Technology and Research. 14, 6, p. 1247-1258 12 p.

Research output: Contribution to journalArticle

2 Scopus citations
2016

Atomic-scale investigation of triple junction role on defects binding energetics and structural stability in α-Fe

Adlakha, I. & Solanki, K., Oct 1 2016, In : Acta Materialia. 118, p. 64-76 13 p.

Research output: Contribution to journalArticle

9 Scopus citations
10 Scopus citations

Extreme creep resistance in a microstructurally stable nanocrystalline alloy

Darling, K. A., Rajagopalan, M., Komarasamy, M., Bhatia, M. A., Hornbuckle, B. C., Mishra, R. S. & Solanki, K., Sep 14 2016, In : Nature. 537, 7620, p. 378-381 4 p.

Research output: Contribution to journalArticle

75 Scopus citations

Far-reaching geometrical artefacts due to thermal decomposition of polymeric coatings around focused ion beam milled pigment particles

Rykaczewski, K., Mieritz, D. G., Liu, M., Ma, Y., Iezzi, E. B., Sun, X., Wang, L., Solanki, K., Seo, D. & Wang, R., Jun 1 2016, In : Journal of Microscopy. 262, 3, p. 316-325 10 p.

Research output: Contribution to journalArticle

1 Scopus citations

Generalized stacking fault energies and slip in β-tin

Bhatia, M. A., Adlakha, I., Lu, G. & Solanki, K., Oct 1 2016, In : Scripta Materialia. 123, p. 21-25 5 p.

Research output: Contribution to journalArticle

8 Scopus citations

The role of Ta on twinnability in nanocrystalline Cu–Ta alloys

Bhatia, M. A., Rajagopalan, M., Darling, K. A., Tschopp, M. A. & Solanki, K., Jul 16 2016, (Accepted/In press) In : Materials Research Letters. p. 1-7 7 p.

Research output: Contribution to journalArticle

20 Scopus citations
2015

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

Bhatia, M. A., Mathaudhu, S. N. & Solanki, K., Oct 15 2015, In : Acta Materialia. 99, p. 382-391 10 p.

Research output: Contribution to journalArticle

34 Scopus citations

Discrete dislocation modeling of stress corrosion cracking in an iron

Adlakha, I., Sadananda, K. & Solanki, K., Nov 1 2015, In : Corrosion Reviews. 33, 6, p. 467-475 9 p.

Research output: Contribution to journalArticle

5 Scopus citations

Effect of Ta Solute Concentration on the Microstructural Evolution in Immiscible Cu-Ta Alloys

Hornbuckle, B. C., Rojhirunsakool, T., Rajagopalan, M., Alam, T., Purja Pun, G. P., Banerjee, R., Solanki, K., Mishin, Y., Kecskes, L. J. & Darling, K. A., Dec 1 2015, In : JOM. 67, 12, p. 2802-2809 8 p.

Research output: Contribution to journalArticle

22 Scopus citations

Effects of oxygen on prismatic faults in α-Ti: A combined quantum mechanics/molecular mechanics study

Bhatia, M. A., Zhang, X., Azarnoush, M., Lu, G. & Solanki, K., Mar 15 2015, In : Scripta Materialia. 98, p. 32-35 4 p.

Research output: Contribution to journalArticle

14 Scopus citations
2 Scopus citations

Full elastic constants of Cu<inf>6</inf>Sn<inf>5</inf> intermetallic by Resonant Ultrasound Spectroscopy (RUS) and ab initio calculations

Jiang, L., Muthegowda, N., Bhatia, M. A., Migliori, A., Solanki, K. & Chawla, N., May 7 2015, (Accepted/In press) In : Scripta Materialia.

Research output: Contribution to journalArticle

5 Scopus citations
13 Scopus citations
2014

Atomic-scale analysis of liquid-gallium embrittlement of aluminum grain boundaries

Rajagopalan, M., Bhatia, M. A., Tschopp, M. A., Srolovitz, D. J. & Solanki, K., Jul 2014, In : Acta Materialia. 73, p. 312-325 14 p.

Research output: Contribution to journalArticle

49 Scopus citations

Atomic scale investigation of grain boundary structure role on intergranular deformation in aluminium

Adlakha, I., Bhatia, M., Tschopp, M. & Solanki, K., Sep 27 2014, In : Philosophical Magazine. 94, 30, p. 3445-3466 22 p.

Research output: Contribution to journalArticle

14 Scopus citations

Atomic-scale investigation of point defects and hydrogen-solute atmospheres on the edge dislocation mobility in alpha iron

Bhatia, M. A., Groh, S. & Solanki, K., Aug 14 2014, In : Journal of Applied Physics. 116, 6, 064302.

Research output: Contribution to journalArticle

28 Scopus citations

Binding energetics of substitutional and interstitial helium and di-helium defects with grain boundary structure in α-Fe

Tschopp, M. A., Gao, F., Yang, L. & Solanki, K., Feb 10 2014, In : Journal of Applied Physics. 115, 3, 033503.

Research output: Contribution to journalArticle

24 Scopus citations

Binding of HenV clusters to α-Fe grain boundaries

Tschopp, M. A., Gao, F. & Solanki, K., Jun 21 2014, In : Journal of Applied Physics. 115, 23, 233501.

Research output: Contribution to journalArticle

13 Scopus citations

Characterizing the local primary dendrite arm spacing in directionally solidified dendritic microstructures

Tschopp, M. A., Miller, J. D., Oppedal, A. L. & Solanki, K., Jan 1 2014, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 1, p. 426-437 12 p.

Research output: Contribution to journalArticle

13 Scopus citations

Grain boundary segregation of interstitial and substitutional impurity atoms in alpha-iron

Rajagopalan, M., Tschopp, M. A. & Solanki, K., Jan 1 2014, In : JOM. 66, 1, p. 129-138 10 p.

Research output: Contribution to journalArticle

51 Scopus citations

Nonlocal modeling in high-velocity impact failure of 6061-T6 aluminum

Ahad, F. R., Enakoutsa, K., Solanki, K. & Bammann, D. J., Apr 1 2014, In : International Journal of Plasticity. 55, p. 108-132 25 p.

Research output: Contribution to journalArticle

17 Scopus citations

The role of grain boundary structure and crystal orientation on crack growth asymmetry in aluminum

Adlakha, I., Tschopp, M. A. & Solanki, K., Nov 1 2014, In : Materials Science and Engineering A. 618, p. 345-354 10 p.

Research output: Contribution to journalArticle

12 Scopus citations
2013

Atomistic investigation of the role of grain boundary structure on hydrogen segregation and embrittlement in α-Fe

Solanki, K., Tschopp, M. A., Bhatia, M. A. & Rhodes, N. R., Mar 1 2013, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 3, p. 1365-1375 11 p.

Research output: Contribution to journalArticle

60 Scopus citations

Energetics of vacancy segregation to symmetric tilt grain boundaries in hexagonal closed pack materials

Bhatia, M. A. & Solanki, K., Dec 28 2013, In : Journal of Applied Physics. 114, 24, 244309.

Research output: Contribution to journalArticle

26 Scopus citations