• 1986 Citations
  • 24 h-Index
20032021
If you made any changes in Pure, your changes will be visible here soon.

Research Output 2003 2019

Filter
Conference contribution
2019
1 Citation (Scopus)

First-Principles Investigation of the Effect of Solutes on the Ideal Shear Resistance and Electronic Properties of Magnesium

Garg, P., Adlakha, I. & Solanki, K., Jan 1 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer International Publishing, p. 231-237 7 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electronic properties
Magnesium
Atoms
Electronic density of states
Substitution reactions

Revealing the Role of Combined Loading on the Tension–Compression Asymmetry in a Textured AZ31 Magnesium Alloy

Kale, C., Srinivasan, S., Haluai, P. & Solanki, K., Jan 1 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer International Publishing, p. 199-200 2 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium alloys
Anisotropy
Textures
Chemical activation
Temperature
2017
1 Citation (Scopus)

Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities

Kale, C., Rajagopalan, M., Turnage, S., Hornbuckle, B., Darling, K., Mathaudhu, S. N. & Solanki, K., Jan 1 2017, Magnesium Technology 2017. Springer International Publishing, p. 247-251 5 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Magnesium alloys
Microstructure
Testing
Mg-Al-Zn-Mn-Si-Cu alloy
4 Citations (Scopus)

Solute effect on strength and formability of Mg: A first-principle study

Garg, P., Bhatia, M. A., Mathaudhu, S. N. & Solanki, K., Jan 1 2017, Magnesium Technology 2017. Springer International Publishing, p. 483-489 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Formability
Yttrium
Atoms
Energy barriers
Stacking faults
2016

Numerical investigation of the AE44-mild steel galvanic structural joint

Muthegowda, N., Bazehhour, B. G. & Solanki, K., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Minerals, Metals and Materials Society, Vol. 2016-January. p. 275-278 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon steel
Electrolytes
Anodes
Elastic deformation
Alloy steel
2014
2 Citations (Scopus)

Investigation of atomic-scale energetics on liquid metal embrittlement of aluminum due to gallium

Rajagopalan, M., Bhatia, M. A., Solanki, K. & Tschopp, M. A., 2014, TMS Annual Meeting. Minerals, Metals and Materials Society, p. 1069-1076 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gallium
embrittlement
Embrittlement
liquid metals
Aluminum
2 Citations (Scopus)

Tensile and shear mechanical properties in a thermo-mechanical-electrical processed spot weld

Turnage, S. A., Solanki, K., Whittington, W. R., Florea, R. S., Tschopp, M. A. & Darling, K. A., 2014, TMS Light Metals. Minerals, Metals and Materials Society, p. 359-363 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

spot welds
Welds
punches
mechanical properties
shear
2013

Characterizing primary dendritic microstructures to quantify the processing-structure-property relationship in single crystal nickel-based superalloys

Tschopp, M. A., Oppedal, A. L., Miller, J. D., Groeber, M. A., Rosenberger, A. H. & Solanki, K., 2013, TMS Annual Meeting. p. 301-310 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat resistant alloys
Nickel
Superalloys
Single crystals
nickel

Energetics and length scales of point defect and element segregation to grain boundaries in α-Fe

Tschopp, M. A., Solanki, K., Gao, F. & Sun, X., 2013, TMS Annual Meeting. p. 729-736 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Point defects
point defects
Grain boundaries
grain boundaries
Impurities

Influence of grain boundary structure on interfacial fracture under tensile loading: Cohesive zone model informed by atomistic simulations

Adlakha, I., Solanki, K. & Tschopp, M. A., 2013, TMS Annual Meeting. p. 753-758 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain boundaries
grain boundaries
Molecular dynamics
simulation
molecular dynamics

Influence of yttrium on creep behavior in nano-crystalline magnesium using molecular dynamics simulation

Bhatia, M. A. & Solanki, K., 2013, Magnesium Technology. p. 21-26 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yttrium
Magnesium
Molecular dynamics
Creep
Crystalline materials
2011

A physically motivated internal state variable plasticity/damage model embedded with a length scale for hazmat tank cars' structural integrity applications

Ahad, F. R., Enakoutsa, K., Solanki, K., Tjipowidjojo, Y. & Bammann, D. J., 2011, 2011 Joint Rail Conference, JRC 2011. p. 263-272 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tank cars
Structural integrity
Plasticity
Subroutines
Boundary value problems
2 Citations (Scopus)

Effect of substituted aluminum in magnesium tension twin

Solanki, K., Moitra, A. & Bhatia, M., 2011, Magnesium Technology. p. 325-329 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Magnesium
Substitution reactions
Twinning
Doping (additives)
4 Citations (Scopus)

Failure loads and deformation in 6061-T6 aluminum alloy spot welds

Florea, R. S., Solanki, K., Bammann, D. J., Jordon, J. B. & Castanier, M. P., 2011, TMS Annual Meeting. Vol. 2. p. 213-220 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

spot welds
aluminum alloys
Aluminum alloys
Welding
Welds
1 Citation (Scopus)

Localization effects in Bammann-Chiesa-Johnson metals with damage delocalization

Enakoutsa, K., Ahad, F. R., Solanki, K., Tjiptowidjojo, Y. & Bammann, D. J., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 8. p. 505-515 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metals
Defects
Shear bands
Chemical elements
Energy dissipation

The effect of crystallographic orientation on void growth: A molecular dynamics study

Bhatia, M. A., Solanki, K., Moitra, A. & Tschopp, M. A., 2011, TMS Annual Meeting. Vol. 2. p. 577-584 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molecular dynamics
voids
molecular dynamics
Nucleation
nucleation

The effect of various sodium chloride concentrations on the wettability and surface energy of aluminum 7075

Martin, H. J. & Solanki, K., Jan 1 2011, Engineering Sciences and Fundamentals - Core Programming Topic at the 2011 AIChE Annual Meeting. AIChE, Vol. 1. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sodium chloride
Aluminum
Interfacial energy
Sodium Chloride
Wetting
2010
6 Citations (Scopus)

An experimental study of mechanical behavior of resistance spot welded aluminum 6061-T6 joints

Florea, R. S., Solanki, K., Hammi, Y., Bammann, D. J. & Castanier, M. P., 2010, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). Vol. 9. p. 37-43 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welding
Aluminum
Welds
Anisotropy
Finite element method

Deformation of nanovoid in a single crystal aluminum

Bhatia, M. A., Tschopp, M. A., Solanki, K., Moitra, A. & Horstemeyer, M. F., 2010, Materials Science and Technology Conference and Exhibition 2010, MS and T'10. Vol. 2. p. 924-933 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Single crystals
Nucleation
Coalescence
Crystal orientation
2009

Multi-objective design optimization using a damage material model applied to light weighting a formula sae car suspension component

Brister, K. E., Horstemeyer, M. F., Acar, E. & Solanki, K., 2009, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suspensions (components)
Railroad cars
Plasticity
Racing automobiles
Railroad tracks

Process modeling: Use of uncertainty, sensitivity and optimization techniques for improved understanding of compaction model outputs

Stone, T. W., Sanderow, H. I., Grewal, H., Acar, E., Hammi, Y., Allison, P., Solanki, K. & Horstemeyer, M. F., 2009, Advances in Powder Metallurgy and Particulate Materials - 2009, Proceedings of the 2009 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2009. p. 116-130 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compaction
optimization
output
sensitivity
Bearings (structural)

Uncertainty analysis of damage evolution computed through microstructure-property relations

Acar, E., Solanki, K., Rais-Rohani, M. & Horstemeyer, M. F., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. Vol. 1. p. 1109-1122 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uncertainty analysis
Microstructure
Plasticity
Taylor series
Constitutive models
2008
2 Citations (Scopus)

Uncertainty analysis of damage evolution computed through microstructure-property relations

Acar, E., Solanki, K., Rais-Rohani, M. & Horstemeyer, M. F., 2008, Proceedings of the ASME Design Engineering Technical Conference. PARTS A AND B ed. Vol. 1. p. 1109-1122 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uncertainty Analysis
Uncertainty analysis
Microstructure
Damage
Uncertainty
2007

Micromechanical simulation of cyclic plasticity at inclusion particles with pre-over-straining

Xue, Y., Wright, A. M., Solanki, K., Horstemeyer, M. F. & McDowell, D. L., 2007, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 8. p. 7703-7713 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plasticity
Plastic deformation
Plastics
Fatigue of materials
Cyclic loads
1 Citation (Scopus)

Reliability-based structural optimization using a multiscale material model

Solanki, K., Acar, E., Rais-Rohan, M., Eamon, C. & Horstemeyer, M., 2007, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 8. p. 7684-7702 19 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural optimization
Strain rate
Aluminum alloys
Design optimization
Costs
2006
17 Citations (Scopus)

Reliability-based optimization of lightweight automotive structures for crashworthiness

Rais-Rohani, M., Solanki, K. & Eamon, C., 2006, Collection of Technical Papers - 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Vol. 2. p. 1093-1108 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crashworthiness
Reliability analysis
Rails
Passenger cars
Geometry
2004
4 Citations (Scopus)

Crashworthiness simulations comparing PAM-CRASH and LS-DYNA

Solanki, K., Oglesby, D. L., Burton, C. L., Fang, H. & Horstemeyer, M. F., 2004, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crashworthiness
Pulse amplitude modulation
Neon
Failure modes
Materials properties
4 Citations (Scopus)

Energy-based crashworthiness optimization for multiple vehicle impacts

Fang, H., Solanki, K. & Horstemeyer, M. F., 2004, Transportation 2004: Transportation and Environment. p. 11-16 6 p. IMECE2004-59123

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crashworthiness
Energy absorption
Neon
Random access storage
Polynomials