Surface wave effects on the reflection phase of curved High Impedance Surfaces

Ahmet C. Durgun, Constantine Balanis, Craig R. Birtcher

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Abstract

For most cases, the reflection phase diagram of a curved High Impedance Surface (HIS) is independent of the curvature. However, the surface waves generated on HISs, due to their periodic geometry, distorts their reflection characteristics within specific frequency intervals. In those intervals, the reflection phase changes as a function of radius of curvature and size of the HIS. These effects are not observed for the flat cases because of the lower radiation resistance of the surface waves.

Original languageEnglish (US)
Title of host publication2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Proceedings
Pages87-88
Number of pages2
DOIs
StatePublished - Dec 1 2013
Event2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Orlando, FL, United States
Duration: Jul 7 2013Jul 13 2013

Publication series

NameIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
ISSN (Print)1522-3965

Other

Other2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013
CountryUnited States
CityOrlando, FL
Period7/7/137/13/13

    Fingerprint

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Durgun, A. C., Balanis, C., & Birtcher, C. R. (2013). Surface wave effects on the reflection phase of curved High Impedance Surfaces. In 2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Proceedings (pp. 87-88). [6710704] (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). https://doi.org/10.1109/APS.2013.6710704