Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options

Mosoud Farzaneh; Antony C. Baker; R. Allen Bernstorf; Jeff T. Burnhan; Edward A. Cherney; William A. Chisholm; Igor Fofana; Ravi S. Gorur; Tom Grisham; Issouf Gutman; Lars Rolfseng; Gerald A. Stewart

doi:10.1109/TPWRD.2007.899540

Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options

Mosoud Farzaneh, Antony C. Baker, R. Allen Bernstorf, Jeff T. Burnhan, Edward A. Cherney, William A. Chisholm, Igor Fofana, Ravi S. Gorur, Tom Grisham, Issouf Gutman, Lars Rolfseng, Gerald A. Stewart

Research output: Contribution to journal › Article › peer-review

36 Scopus citations

Abstract

Special measures may be needed to select line insulators for transmission and distribution lines in locations exposed to freezing conditions. This second part of the paper describes the strength of typical line insulation in these conditions and then deals with selection and mitigation methods based on the in-service stresses described in Part I.

Original language	English (US)
Pages (from-to)	2297-2304
Number of pages	8
Journal	IEEE Transactions on Power Delivery
Volume	22
Issue number	4
DOIs	https://doi.org/10.1109/TPWRD.2007.899540
State	Published - Oct 2007
Externally published	Yes

Keywords

Climate
Contamination
Flashover
Fog
Freezing
High voltage
Ice
Insulation
Insulation coordination
Line insulators
Snow
Voltage control

ASJC Scopus subject areas

Energy Engineering and Power Technology
Electrical and Electronic Engineering

Access to Document

10.1109/TPWRD.2007.899540

Cite this

Farzaneh, M., Baker, A. C., Bernstorf, R. A., Burnhan, J. T., Cherney, E. A., Chisholm, W. A., Fofana, I., Gorur, R. S., Grisham, T., Gutman, I., Rolfseng, L., & Stewart, G. A. (2007). Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options. IEEE Transactions on Power Delivery, 22(4), 2297-2304. https://doi.org/10.1109/TPWRD.2007.899540

Farzaneh, M, Baker, AC, Bernstorf, RA, Burnhan, JT, Cherney, EA, Chisholm, WA, Fofana, I, Gorur, RS, Grisham, T, Gutman, I, Rolfseng, L & Stewart, GA 2007, 'Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options', IEEE Transactions on Power Delivery, vol. 22, no. 4, pp. 2297-2304. https://doi.org/10.1109/TPWRD.2007.899540

@article{8c4a9984937542098b34554ab47868ee,

title = "Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options",

abstract = "Special measures may be needed to select line insulators for transmission and distribution lines in locations exposed to freezing conditions. This second part of the paper describes the strength of typical line insulation in these conditions and then deals with selection and mitigation methods based on the in-service stresses described in Part I.",

keywords = "Climate, Contamination, Flashover, Fog, Freezing, High voltage, Ice, Insulation, Insulation coordination, Line insulators, Snow, Voltage control",

author = "Mosoud Farzaneh and Baker, {Antony C.} and Bernstorf, {R. Allen} and Burnhan, {Jeff T.} and Cherney, {Edward A.} and Chisholm, {William A.} and Igor Fofana and Gorur, {Ravi S.} and Tom Grisham and Issouf Gutman and Lars Rolfseng and Stewart, {Gerald A.}",

year = "2007",

month = oct,

doi = "10.1109/TPWRD.2007.899540",

language = "English (US)",

volume = "22",

pages = "2297--2304",

journal = "IEEE Transactions on Power Delivery",

issn = "0885-8977",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "4",

}

TY - JOUR

T1 - Selection of line insulators with respect to ice and snow - Part II

T2 - Selection methods and mitigation options

AU - Farzaneh, Mosoud

AU - Baker, Antony C.

AU - Bernstorf, R. Allen

AU - Burnhan, Jeff T.

AU - Cherney, Edward A.

AU - Chisholm, William A.

AU - Fofana, Igor

AU - Gorur, Ravi S.

AU - Grisham, Tom

AU - Gutman, Issouf

AU - Rolfseng, Lars

AU - Stewart, Gerald A.

PY - 2007/10

Y1 - 2007/10

N2 - Special measures may be needed to select line insulators for transmission and distribution lines in locations exposed to freezing conditions. This second part of the paper describes the strength of typical line insulation in these conditions and then deals with selection and mitigation methods based on the in-service stresses described in Part I.

AB - Special measures may be needed to select line insulators for transmission and distribution lines in locations exposed to freezing conditions. This second part of the paper describes the strength of typical line insulation in these conditions and then deals with selection and mitigation methods based on the in-service stresses described in Part I.

KW - Climate

KW - Contamination

KW - Flashover

KW - Fog

KW - Freezing

KW - High voltage

KW - Ice

KW - Insulation

KW - Insulation coordination

KW - Line insulators

KW - Snow

KW - Voltage control

UR - http://www.scopus.com/inward/record.url?scp=35148900192&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=35148900192&partnerID=8YFLogxK

U2 - 10.1109/TPWRD.2007.899540

DO - 10.1109/TPWRD.2007.899540

M3 - Article

AN - SCOPUS:35148900192

SN - 0885-8977

VL - 22

SP - 2297

EP - 2304

JO - IEEE Transactions on Power Delivery

JF - IEEE Transactions on Power Delivery

IS - 4

ER -

Selection of line insulators with respect to ice and snow - Part II: Selection methods and mitigation options

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this