DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS.

J. J. Shah

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Abstract

The paper describes work done in developing an expert system for conceptual form design of load-bearing machine parts. Design of this nature can be done without calculating stress magnitude. The knowledge base is built from case studies of form design, starting with simple structures and gradually increasing the complexity. It was found that this method of case studies was a convenient way of gradually building universal rules for designing. Several types of constraints were considered. It has been demonstrated that knowledge bases for such design problems are not just knowledge intensive but procedure and analysis dependent.

Original languageEnglish (US)
Title of host publicationComputers in Engineering, Proceedings of the International Computers in Engineering Conference and
Place of PublicationNew York, NY, USA
PublisherASME
Pages131-136
Number of pages6
Volume2
StatePublished - 1985

Fingerprint

Expert systems
Bearings (structural)
Machine components

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Shah, J. J. (1985). DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS. In Computers in Engineering, Proceedings of the International Computers in Engineering Conference and (Vol. 2, pp. 131-136). New York, NY, USA: ASME.

DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS. / Shah, J. J.

Computers in Engineering, Proceedings of the International Computers in Engineering Conference and. Vol. 2 New York, NY, USA : ASME, 1985. p. 131-136.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shah, JJ 1985, DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS. in Computers in Engineering, Proceedings of the International Computers in Engineering Conference and. vol. 2, ASME, New York, NY, USA, pp. 131-136.
Shah JJ. DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS. In Computers in Engineering, Proceedings of the International Computers in Engineering Conference and. Vol. 2. New York, NY, USA: ASME. 1985. p. 131-136
Shah, J. J. / DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS. Computers in Engineering, Proceedings of the International Computers in Engineering Conference and. Vol. 2 New York, NY, USA : ASME, 1985. pp. 131-136
@inproceedings{53bf17440ff145a3be8ef4be179d88eb,
title = "DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS.",
abstract = "The paper describes work done in developing an expert system for conceptual form design of load-bearing machine parts. Design of this nature can be done without calculating stress magnitude. The knowledge base is built from case studies of form design, starting with simple structures and gradually increasing the complexity. It was found that this method of case studies was a convenient way of gradually building universal rules for designing. Several types of constraints were considered. It has been demonstrated that knowledge bases for such design problems are not just knowledge intensive but procedure and analysis dependent.",
author = "Shah, {J. J.}",
year = "1985",
language = "English (US)",
volume = "2",
pages = "131--136",
booktitle = "Computers in Engineering, Proceedings of the International Computers in Engineering Conference and",
publisher = "ASME",

}

TY - GEN

T1 - DEVELOPMENT OF A KNOWLEDGE BASE FOR AN EXPERT SYSTEM FOR DESIGN OF STRUCTURAL PARTS.

AU - Shah, J. J.

PY - 1985

Y1 - 1985

N2 - The paper describes work done in developing an expert system for conceptual form design of load-bearing machine parts. Design of this nature can be done without calculating stress magnitude. The knowledge base is built from case studies of form design, starting with simple structures and gradually increasing the complexity. It was found that this method of case studies was a convenient way of gradually building universal rules for designing. Several types of constraints were considered. It has been demonstrated that knowledge bases for such design problems are not just knowledge intensive but procedure and analysis dependent.

AB - The paper describes work done in developing an expert system for conceptual form design of load-bearing machine parts. Design of this nature can be done without calculating stress magnitude. The knowledge base is built from case studies of form design, starting with simple structures and gradually increasing the complexity. It was found that this method of case studies was a convenient way of gradually building universal rules for designing. Several types of constraints were considered. It has been demonstrated that knowledge bases for such design problems are not just knowledge intensive but procedure and analysis dependent.

UR - http://www.scopus.com/inward/record.url?scp=0021946771&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0021946771&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0021946771

VL - 2

SP - 131

EP - 136

BT - Computers in Engineering, Proceedings of the International Computers in Engineering Conference and

PB - ASME

CY - New York, NY, USA

ER -