Wave propagation sensing for damage detection in plates

Anindya Ghoshal, W. N. Martin, Mark J. Schulz, Aditi Chattopadhyay, W. H. Prosser

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

Health monitoring of aerospace structures can be done passively by listening for acoustic waves generated by cracks, impact damage and delaminations, or actively by propagating diagnostic stress waves and interpreting the parameters that characterize the wave travel. This paper investigates modeling of flexural wave propagation in a plate and the design of sensors to detect damage in plates based on stress wave parameters. To increase understanding of the actual physical process of wave propagation, a simple model is developed to simulate wave propagation in a plate with boundaries. The waves can be simulated by applied forces and moments in the model either to represent passive damage growth or active wave generation using piezoceramic actuators. For active wave generation, the model considers a piezoceramic patch bonded perfectly to a quasi-isotropic glass-epoxy composite plate. Distributed sensors are used on the plate and are modeled as being constructed using active fiber composite and piezoceramic materials. For active wave generation, a moment impulse is generated by the actuation of a piezoceramic patch. The waves generated from the patch are detected by the distributed sensor. For passive sensing of acoustic waves, a step function is used to simulate an acoustic emission from a propagating damage. The resulting acoustic wave is measured by the distributed sensor and produces micro-strains in the sensor nodes. The strains produce a single voltage signal output from the distributed sensor. Computational simulations and animations of acoustic wave propagation in a plate are discussed in the paper. A new method to locate the source of an acoustic emission using the time history of the dominant lower frequency components of the flexural wave mode detected by continuous sensors is also presented.

Original languageEnglish (US)
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
EditorsV.S. Rao
Pages300-311
Number of pages12
Volume4693
DOIs
StatePublished - 2002
EventSmart Stuctures and Materials 2002: Modeling, Signal Processing and Control - San Diego, CA, United States
Duration: Mar 18 2002Mar 21 2002

Other

OtherSmart Stuctures and Materials 2002: Modeling, Signal Processing and Control
CountryUnited States
CitySan Diego, CA
Period3/18/023/21/02

Fingerprint

Damage detection
Wave propagation
wave propagation
damage
sensors
wave generation
Sensors
stress waves
acoustics
acoustic emission
Elastic waves
Acoustic waves
Acoustic emissions
impact damage
moments
animation
step functions
Acoustic wave propagation
composite materials
fiber composites

Keywords

  • Active wave propagation
  • Distributed sensor
  • Health Monitoring

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Ghoshal, A., Martin, W. N., Schulz, M. J., Chattopadhyay, A., & Prosser, W. H. (2002). Wave propagation sensing for damage detection in plates. In V. S. Rao (Ed.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 4693, pp. 300-311) https://doi.org/10.1117/12.475227

Wave propagation sensing for damage detection in plates. / Ghoshal, Anindya; Martin, W. N.; Schulz, Mark J.; Chattopadhyay, Aditi; Prosser, W. H.

Proceedings of SPIE - The International Society for Optical Engineering. ed. / V.S. Rao. Vol. 4693 2002. p. 300-311.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ghoshal, A, Martin, WN, Schulz, MJ, Chattopadhyay, A & Prosser, WH 2002, Wave propagation sensing for damage detection in plates. in VS Rao (ed.), Proceedings of SPIE - The International Society for Optical Engineering. vol. 4693, pp. 300-311, Smart Stuctures and Materials 2002: Modeling, Signal Processing and Control, San Diego, CA, United States, 3/18/02. https://doi.org/10.1117/12.475227
Ghoshal A, Martin WN, Schulz MJ, Chattopadhyay A, Prosser WH. Wave propagation sensing for damage detection in plates. In Rao VS, editor, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 4693. 2002. p. 300-311 https://doi.org/10.1117/12.475227
Ghoshal, Anindya ; Martin, W. N. ; Schulz, Mark J. ; Chattopadhyay, Aditi ; Prosser, W. H. / Wave propagation sensing for damage detection in plates. Proceedings of SPIE - The International Society for Optical Engineering. editor / V.S. Rao. Vol. 4693 2002. pp. 300-311
@inproceedings{80996e0659ef4b27b97fd3b1e2490bd7,
title = "Wave propagation sensing for damage detection in plates",
abstract = "Health monitoring of aerospace structures can be done passively by listening for acoustic waves generated by cracks, impact damage and delaminations, or actively by propagating diagnostic stress waves and interpreting the parameters that characterize the wave travel. This paper investigates modeling of flexural wave propagation in a plate and the design of sensors to detect damage in plates based on stress wave parameters. To increase understanding of the actual physical process of wave propagation, a simple model is developed to simulate wave propagation in a plate with boundaries. The waves can be simulated by applied forces and moments in the model either to represent passive damage growth or active wave generation using piezoceramic actuators. For active wave generation, the model considers a piezoceramic patch bonded perfectly to a quasi-isotropic glass-epoxy composite plate. Distributed sensors are used on the plate and are modeled as being constructed using active fiber composite and piezoceramic materials. For active wave generation, a moment impulse is generated by the actuation of a piezoceramic patch. The waves generated from the patch are detected by the distributed sensor. For passive sensing of acoustic waves, a step function is used to simulate an acoustic emission from a propagating damage. The resulting acoustic wave is measured by the distributed sensor and produces micro-strains in the sensor nodes. The strains produce a single voltage signal output from the distributed sensor. Computational simulations and animations of acoustic wave propagation in a plate are discussed in the paper. A new method to locate the source of an acoustic emission using the time history of the dominant lower frequency components of the flexural wave mode detected by continuous sensors is also presented.",
keywords = "Active wave propagation, Distributed sensor, Health Monitoring",
author = "Anindya Ghoshal and Martin, {W. N.} and Schulz, {Mark J.} and Aditi Chattopadhyay and Prosser, {W. H.}",
year = "2002",
doi = "10.1117/12.475227",
language = "English (US)",
volume = "4693",
pages = "300--311",
editor = "V.S. Rao",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Wave propagation sensing for damage detection in plates

AU - Ghoshal, Anindya

AU - Martin, W. N.

AU - Schulz, Mark J.

AU - Chattopadhyay, Aditi

AU - Prosser, W. H.

PY - 2002

Y1 - 2002

N2 - Health monitoring of aerospace structures can be done passively by listening for acoustic waves generated by cracks, impact damage and delaminations, or actively by propagating diagnostic stress waves and interpreting the parameters that characterize the wave travel. This paper investigates modeling of flexural wave propagation in a plate and the design of sensors to detect damage in plates based on stress wave parameters. To increase understanding of the actual physical process of wave propagation, a simple model is developed to simulate wave propagation in a plate with boundaries. The waves can be simulated by applied forces and moments in the model either to represent passive damage growth or active wave generation using piezoceramic actuators. For active wave generation, the model considers a piezoceramic patch bonded perfectly to a quasi-isotropic glass-epoxy composite plate. Distributed sensors are used on the plate and are modeled as being constructed using active fiber composite and piezoceramic materials. For active wave generation, a moment impulse is generated by the actuation of a piezoceramic patch. The waves generated from the patch are detected by the distributed sensor. For passive sensing of acoustic waves, a step function is used to simulate an acoustic emission from a propagating damage. The resulting acoustic wave is measured by the distributed sensor and produces micro-strains in the sensor nodes. The strains produce a single voltage signal output from the distributed sensor. Computational simulations and animations of acoustic wave propagation in a plate are discussed in the paper. A new method to locate the source of an acoustic emission using the time history of the dominant lower frequency components of the flexural wave mode detected by continuous sensors is also presented.

AB - Health monitoring of aerospace structures can be done passively by listening for acoustic waves generated by cracks, impact damage and delaminations, or actively by propagating diagnostic stress waves and interpreting the parameters that characterize the wave travel. This paper investigates modeling of flexural wave propagation in a plate and the design of sensors to detect damage in plates based on stress wave parameters. To increase understanding of the actual physical process of wave propagation, a simple model is developed to simulate wave propagation in a plate with boundaries. The waves can be simulated by applied forces and moments in the model either to represent passive damage growth or active wave generation using piezoceramic actuators. For active wave generation, the model considers a piezoceramic patch bonded perfectly to a quasi-isotropic glass-epoxy composite plate. Distributed sensors are used on the plate and are modeled as being constructed using active fiber composite and piezoceramic materials. For active wave generation, a moment impulse is generated by the actuation of a piezoceramic patch. The waves generated from the patch are detected by the distributed sensor. For passive sensing of acoustic waves, a step function is used to simulate an acoustic emission from a propagating damage. The resulting acoustic wave is measured by the distributed sensor and produces micro-strains in the sensor nodes. The strains produce a single voltage signal output from the distributed sensor. Computational simulations and animations of acoustic wave propagation in a plate are discussed in the paper. A new method to locate the source of an acoustic emission using the time history of the dominant lower frequency components of the flexural wave mode detected by continuous sensors is also presented.

KW - Active wave propagation

KW - Distributed sensor

KW - Health Monitoring

UR - http://www.scopus.com/inward/record.url?scp=0036028283&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036028283&partnerID=8YFLogxK

U2 - 10.1117/12.475227

DO - 10.1117/12.475227

M3 - Conference contribution

AN - SCOPUS:0036028283

VL - 4693

SP - 300

EP - 311

BT - Proceedings of SPIE - The International Society for Optical Engineering

A2 - Rao, V.S.

ER -