Water cooling method to improve the performance of field-mounted, insulated, and concentrating photovoltaic modules

Matthew K. Smith, Hanny Selbak, Carl C. Wamser, Nicholas U. Day, Mathew Krieske, David Sailor, Todd N. Rosenstiel

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

The installation rate of crystalline silicon photovoltaic (PV) modules worldwide is at an all-time high and is projected to continue to grow as the cost of PV technology is reduced. It is important to note that PV power generation is heavily influenced by the local climate. In particular, for crystalline silicon-based PV devices, as the operating temperature of the panel increases, the efficiency decreases. Higher operating temperatures also lead to accelerated material and mechanical degradation, potentially compromising system effectiveness over the lifetime of the panels. In addition, atmospheric pollution can cause particle deposition on the surface of PV modules (soiling), reducing the amount of solar irradiance that reaches the PV material and reducing panel efficiency. Various cooling and cleaning methods have been proposed in the literature to mitigate these problems. In this study, a uniform film of water was continuously recirculated by pumping over the surface of a solar panel using an emitter head attached to the top of the panel. The water cooling technique was able to maintain panel temperature below 40 C while adjacent untreated panels were operating near 55 C. Besides the efficiency improvements due to cooling, the film of water also kept the panels clean, avoiding any reduced power output caused by panel soiling. Additional studies were carried out with artificially chilled cooling fluid, insulating materials, and side mirrors to examine the cooling system performance under different installation scenarios. Water cooling is concluded to be an effective means of increasing the efficiency of monocrystalline silicon photovoltaic panels. Under normal operating conditions, the increased energy output from the panels is more than sufficient to compensate for the energy required to pump the water.

Original languageEnglish (US)
Article number034503
JournalJournal of Solar Energy Engineering, Transactions of the ASME
Volume136
Issue number3
DOIs
StatePublished - Aug 2014
Externally publishedYes

Fingerprint

Cooling water
Cooling
Crystalline materials
Monocrystalline silicon
Water
Silicon
Insulating materials
Cooling systems
Temperature
Power generation
Cleaning
Pollution
Pumps
Degradation
Fluids
Costs

Keywords

  • efficiency
  • photovoltaics
  • system
  • testing

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Renewable Energy, Sustainability and the Environment

Cite this

Water cooling method to improve the performance of field-mounted, insulated, and concentrating photovoltaic modules. / Smith, Matthew K.; Selbak, Hanny; Wamser, Carl C.; Day, Nicholas U.; Krieske, Mathew; Sailor, David; Rosenstiel, Todd N.

In: Journal of Solar Energy Engineering, Transactions of the ASME, Vol. 136, No. 3, 034503, 08.2014.

Research output: Contribution to journalArticle

Smith, Matthew K. ; Selbak, Hanny ; Wamser, Carl C. ; Day, Nicholas U. ; Krieske, Mathew ; Sailor, David ; Rosenstiel, Todd N. / Water cooling method to improve the performance of field-mounted, insulated, and concentrating photovoltaic modules. In: Journal of Solar Energy Engineering, Transactions of the ASME. 2014 ; Vol. 136, No. 3.
@article{64c4e66f005f403c93b2a30dbd29866d,
title = "Water cooling method to improve the performance of field-mounted, insulated, and concentrating photovoltaic modules",
abstract = "The installation rate of crystalline silicon photovoltaic (PV) modules worldwide is at an all-time high and is projected to continue to grow as the cost of PV technology is reduced. It is important to note that PV power generation is heavily influenced by the local climate. In particular, for crystalline silicon-based PV devices, as the operating temperature of the panel increases, the efficiency decreases. Higher operating temperatures also lead to accelerated material and mechanical degradation, potentially compromising system effectiveness over the lifetime of the panels. In addition, atmospheric pollution can cause particle deposition on the surface of PV modules (soiling), reducing the amount of solar irradiance that reaches the PV material and reducing panel efficiency. Various cooling and cleaning methods have been proposed in the literature to mitigate these problems. In this study, a uniform film of water was continuously recirculated by pumping over the surface of a solar panel using an emitter head attached to the top of the panel. The water cooling technique was able to maintain panel temperature below 40 C while adjacent untreated panels were operating near 55 C. Besides the efficiency improvements due to cooling, the film of water also kept the panels clean, avoiding any reduced power output caused by panel soiling. Additional studies were carried out with artificially chilled cooling fluid, insulating materials, and side mirrors to examine the cooling system performance under different installation scenarios. Water cooling is concluded to be an effective means of increasing the efficiency of monocrystalline silicon photovoltaic panels. Under normal operating conditions, the increased energy output from the panels is more than sufficient to compensate for the energy required to pump the water.",
keywords = "efficiency, photovoltaics, system, testing",
author = "Smith, {Matthew K.} and Hanny Selbak and Wamser, {Carl C.} and Day, {Nicholas U.} and Mathew Krieske and David Sailor and Rosenstiel, {Todd N.}",
year = "2014",
month = "8",
doi = "10.1115/1.4026466",
language = "English (US)",
volume = "136",
journal = "Journal of Solar Energy Engineering, Transactions of the ASME",
issn = "0199-6231",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "3",

}

TY - JOUR

T1 - Water cooling method to improve the performance of field-mounted, insulated, and concentrating photovoltaic modules

AU - Smith, Matthew K.

AU - Selbak, Hanny

AU - Wamser, Carl C.

AU - Day, Nicholas U.

AU - Krieske, Mathew

AU - Sailor, David

AU - Rosenstiel, Todd N.

PY - 2014/8

Y1 - 2014/8

N2 - The installation rate of crystalline silicon photovoltaic (PV) modules worldwide is at an all-time high and is projected to continue to grow as the cost of PV technology is reduced. It is important to note that PV power generation is heavily influenced by the local climate. In particular, for crystalline silicon-based PV devices, as the operating temperature of the panel increases, the efficiency decreases. Higher operating temperatures also lead to accelerated material and mechanical degradation, potentially compromising system effectiveness over the lifetime of the panels. In addition, atmospheric pollution can cause particle deposition on the surface of PV modules (soiling), reducing the amount of solar irradiance that reaches the PV material and reducing panel efficiency. Various cooling and cleaning methods have been proposed in the literature to mitigate these problems. In this study, a uniform film of water was continuously recirculated by pumping over the surface of a solar panel using an emitter head attached to the top of the panel. The water cooling technique was able to maintain panel temperature below 40 C while adjacent untreated panels were operating near 55 C. Besides the efficiency improvements due to cooling, the film of water also kept the panels clean, avoiding any reduced power output caused by panel soiling. Additional studies were carried out with artificially chilled cooling fluid, insulating materials, and side mirrors to examine the cooling system performance under different installation scenarios. Water cooling is concluded to be an effective means of increasing the efficiency of monocrystalline silicon photovoltaic panels. Under normal operating conditions, the increased energy output from the panels is more than sufficient to compensate for the energy required to pump the water.

AB - The installation rate of crystalline silicon photovoltaic (PV) modules worldwide is at an all-time high and is projected to continue to grow as the cost of PV technology is reduced. It is important to note that PV power generation is heavily influenced by the local climate. In particular, for crystalline silicon-based PV devices, as the operating temperature of the panel increases, the efficiency decreases. Higher operating temperatures also lead to accelerated material and mechanical degradation, potentially compromising system effectiveness over the lifetime of the panels. In addition, atmospheric pollution can cause particle deposition on the surface of PV modules (soiling), reducing the amount of solar irradiance that reaches the PV material and reducing panel efficiency. Various cooling and cleaning methods have been proposed in the literature to mitigate these problems. In this study, a uniform film of water was continuously recirculated by pumping over the surface of a solar panel using an emitter head attached to the top of the panel. The water cooling technique was able to maintain panel temperature below 40 C while adjacent untreated panels were operating near 55 C. Besides the efficiency improvements due to cooling, the film of water also kept the panels clean, avoiding any reduced power output caused by panel soiling. Additional studies were carried out with artificially chilled cooling fluid, insulating materials, and side mirrors to examine the cooling system performance under different installation scenarios. Water cooling is concluded to be an effective means of increasing the efficiency of monocrystalline silicon photovoltaic panels. Under normal operating conditions, the increased energy output from the panels is more than sufficient to compensate for the energy required to pump the water.

KW - efficiency

KW - photovoltaics

KW - system

KW - testing

UR - http://www.scopus.com/inward/record.url?scp=84893313446&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893313446&partnerID=8YFLogxK

U2 - 10.1115/1.4026466

DO - 10.1115/1.4026466

M3 - Article

AN - SCOPUS:84893313446

VL - 136

JO - Journal of Solar Energy Engineering, Transactions of the ASME

JF - Journal of Solar Energy Engineering, Transactions of the ASME

SN - 0199-6231

IS - 3

M1 - 034503

ER -