Transient analysis of inductive induced voltage between power line and nearby pipeline

Xuan Wu, Hui Zhang, George G. Karady

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Among the available literature on electromagnetic interference between high voltage power lines and nearby pipelines, the topic of transient induced voltage on the pipelines are rarely discussed. Fault in high voltage transmission systems is usually cleared in several cycles, sometimes even before the fault current reaches the steady state. This paper proposes an analytical approach for calculating the transient induced voltage and current on a pipeline due to inductive coupling using a circuit model. A numerical example is studied to demonstrate the waveforms of transient induced voltage and current on the pipeline. Simulation results show that the transient peak of the induced voltage is greater than steady state values. Therefore, it is necessary to study the induced voltage and current during the transient period.

Original languageEnglish (US)
Pages (from-to)47-54
Number of pages8
JournalInternational Journal of Electrical Power and Energy Systems
Volume84
DOIs
StatePublished - Jan 1 2017

Fingerprint

Transient analysis
Pipelines
Electric potential
Electric fault currents
Signal interference
Networks (circuits)

Keywords

  • Pipeline
  • State space
  • Transient inductive interference
  • Transmission line

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Transient analysis of inductive induced voltage between power line and nearby pipeline. / Wu, Xuan; Zhang, Hui; Karady, George G.

In: International Journal of Electrical Power and Energy Systems, Vol. 84, 01.01.2017, p. 47-54.

Research output: Contribution to journalArticle

@article{dcdcbc2178024d708804a2db23c01d21,
title = "Transient analysis of inductive induced voltage between power line and nearby pipeline",
abstract = "Among the available literature on electromagnetic interference between high voltage power lines and nearby pipelines, the topic of transient induced voltage on the pipelines are rarely discussed. Fault in high voltage transmission systems is usually cleared in several cycles, sometimes even before the fault current reaches the steady state. This paper proposes an analytical approach for calculating the transient induced voltage and current on a pipeline due to inductive coupling using a circuit model. A numerical example is studied to demonstrate the waveforms of transient induced voltage and current on the pipeline. Simulation results show that the transient peak of the induced voltage is greater than steady state values. Therefore, it is necessary to study the induced voltage and current during the transient period.",
keywords = "Pipeline, State space, Transient inductive interference, Transmission line",
author = "Xuan Wu and Hui Zhang and Karady, {George G.}",
year = "2017",
month = "1",
day = "1",
doi = "10.1016/j.ijepes.2016.04.051",
language = "English (US)",
volume = "84",
pages = "47--54",
journal = "International Journal of Electrical Power and Energy Systems",
issn = "0142-0615",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Transient analysis of inductive induced voltage between power line and nearby pipeline

AU - Wu, Xuan

AU - Zhang, Hui

AU - Karady, George G.

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Among the available literature on electromagnetic interference between high voltage power lines and nearby pipelines, the topic of transient induced voltage on the pipelines are rarely discussed. Fault in high voltage transmission systems is usually cleared in several cycles, sometimes even before the fault current reaches the steady state. This paper proposes an analytical approach for calculating the transient induced voltage and current on a pipeline due to inductive coupling using a circuit model. A numerical example is studied to demonstrate the waveforms of transient induced voltage and current on the pipeline. Simulation results show that the transient peak of the induced voltage is greater than steady state values. Therefore, it is necessary to study the induced voltage and current during the transient period.

AB - Among the available literature on electromagnetic interference between high voltage power lines and nearby pipelines, the topic of transient induced voltage on the pipelines are rarely discussed. Fault in high voltage transmission systems is usually cleared in several cycles, sometimes even before the fault current reaches the steady state. This paper proposes an analytical approach for calculating the transient induced voltage and current on a pipeline due to inductive coupling using a circuit model. A numerical example is studied to demonstrate the waveforms of transient induced voltage and current on the pipeline. Simulation results show that the transient peak of the induced voltage is greater than steady state values. Therefore, it is necessary to study the induced voltage and current during the transient period.

KW - Pipeline

KW - State space

KW - Transient inductive interference

KW - Transmission line

UR - http://www.scopus.com/inward/record.url?scp=84969245710&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84969245710&partnerID=8YFLogxK

U2 - 10.1016/j.ijepes.2016.04.051

DO - 10.1016/j.ijepes.2016.04.051

M3 - Article

VL - 84

SP - 47

EP - 54

JO - International Journal of Electrical Power and Energy Systems

JF - International Journal of Electrical Power and Energy Systems

SN - 0142-0615

ER -