Thermal imaging of alluvial fans

A new technique for remote classification of sedimentary features

Craig Hardgrove, Jeffrey Moersch, Stephen Whisner

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

We evaluate the utility of remote thermal image data for mapping geomorphic features and evidence of sedimentary processes on the surfaces of alluvial fans. Prior studies of alluvial fans have made extensive use of visible images and traditional field-based techniques. As a case study demonstration of this technique, we compare thermal images acquired from the ground and a light aircraft (altitude ~ 5000 ft) to a pre-existing ground-based map of features on the Dolomite Fan in Owens Valley, California. Thermal images from the aircraft were acquired at several times of day to determine how the surface temperatures of the alluvial fan rise and fall throughout a diurnal cycle. We have also acquired thermal images from the ground at 5 minute intervals over the course of a diurnal cycle. The aerial thermal images (ground resolution ~ 2 m/pixel) reveal evidence of a variety of sedimentary processes that have acted on the fan surface. These images show spatial-thermophysical patterns associated with clast-rich and clast-poor debris flows, debris-flow levees and the change in particle size at the toe of the fan. The locations of these features in the thermal images match the locations of the features previously mapped by others using traditional ground-based field sedimentology techniques. All debris flows that are exposed at the fan surface are evident in the aerial thermal images, including those that have been heavily weathered and are difficult to observe in visible images. This case study demonstrates that aerial thermal images can be used to provide reconnaissance of an alluvial fan, suggest what sedimentary processes have most recently acted on the surface of the fan, and to prioritize sites for detailed study on the ground.

Original languageEnglish (US)
Pages (from-to)124-130
Number of pages7
JournalEarth and Planetary Science Letters
Volume285
Issue number1-2
DOIs
StatePublished - Jul 30 2009
Externally publishedYes

Fingerprint

sedimentary feature
Infrared imaging
alluvial fan
fans
Fans
Debris
debris
debris flow
Antennas
clast
Aircraft
Sedimentology
aircraft
light aircraft
Levees
Antenna grounds
Hot Temperature
cycles
reconnaissance
sedimentology

Keywords

  • alluvial fans
  • debris flows
  • remote sensing
  • thermal inertia
  • thermal infrared

ASJC Scopus subject areas

  • Geochemistry and Petrology
  • Geophysics
  • Earth and Planetary Sciences (miscellaneous)
  • Space and Planetary Science

Cite this

Thermal imaging of alluvial fans : A new technique for remote classification of sedimentary features. / Hardgrove, Craig; Moersch, Jeffrey; Whisner, Stephen.

In: Earth and Planetary Science Letters, Vol. 285, No. 1-2, 30.07.2009, p. 124-130.

Research output: Contribution to journalArticle

@article{1f9507d673104468a28a73e9b79cf379,
title = "Thermal imaging of alluvial fans: A new technique for remote classification of sedimentary features",
abstract = "We evaluate the utility of remote thermal image data for mapping geomorphic features and evidence of sedimentary processes on the surfaces of alluvial fans. Prior studies of alluvial fans have made extensive use of visible images and traditional field-based techniques. As a case study demonstration of this technique, we compare thermal images acquired from the ground and a light aircraft (altitude ~ 5000 ft) to a pre-existing ground-based map of features on the Dolomite Fan in Owens Valley, California. Thermal images from the aircraft were acquired at several times of day to determine how the surface temperatures of the alluvial fan rise and fall throughout a diurnal cycle. We have also acquired thermal images from the ground at 5 minute intervals over the course of a diurnal cycle. The aerial thermal images (ground resolution ~ 2 m/pixel) reveal evidence of a variety of sedimentary processes that have acted on the fan surface. These images show spatial-thermophysical patterns associated with clast-rich and clast-poor debris flows, debris-flow levees and the change in particle size at the toe of the fan. The locations of these features in the thermal images match the locations of the features previously mapped by others using traditional ground-based field sedimentology techniques. All debris flows that are exposed at the fan surface are evident in the aerial thermal images, including those that have been heavily weathered and are difficult to observe in visible images. This case study demonstrates that aerial thermal images can be used to provide reconnaissance of an alluvial fan, suggest what sedimentary processes have most recently acted on the surface of the fan, and to prioritize sites for detailed study on the ground.",
keywords = "alluvial fans, debris flows, remote sensing, thermal inertia, thermal infrared",
author = "Craig Hardgrove and Jeffrey Moersch and Stephen Whisner",
year = "2009",
month = "7",
day = "30",
doi = "10.1016/j.epsl.2009.06.004",
language = "English (US)",
volume = "285",
pages = "124--130",
journal = "Earth and Planetary Sciences Letters",
issn = "0012-821X",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Thermal imaging of alluvial fans

T2 - A new technique for remote classification of sedimentary features

AU - Hardgrove, Craig

AU - Moersch, Jeffrey

AU - Whisner, Stephen

PY - 2009/7/30

Y1 - 2009/7/30

N2 - We evaluate the utility of remote thermal image data for mapping geomorphic features and evidence of sedimentary processes on the surfaces of alluvial fans. Prior studies of alluvial fans have made extensive use of visible images and traditional field-based techniques. As a case study demonstration of this technique, we compare thermal images acquired from the ground and a light aircraft (altitude ~ 5000 ft) to a pre-existing ground-based map of features on the Dolomite Fan in Owens Valley, California. Thermal images from the aircraft were acquired at several times of day to determine how the surface temperatures of the alluvial fan rise and fall throughout a diurnal cycle. We have also acquired thermal images from the ground at 5 minute intervals over the course of a diurnal cycle. The aerial thermal images (ground resolution ~ 2 m/pixel) reveal evidence of a variety of sedimentary processes that have acted on the fan surface. These images show spatial-thermophysical patterns associated with clast-rich and clast-poor debris flows, debris-flow levees and the change in particle size at the toe of the fan. The locations of these features in the thermal images match the locations of the features previously mapped by others using traditional ground-based field sedimentology techniques. All debris flows that are exposed at the fan surface are evident in the aerial thermal images, including those that have been heavily weathered and are difficult to observe in visible images. This case study demonstrates that aerial thermal images can be used to provide reconnaissance of an alluvial fan, suggest what sedimentary processes have most recently acted on the surface of the fan, and to prioritize sites for detailed study on the ground.

AB - We evaluate the utility of remote thermal image data for mapping geomorphic features and evidence of sedimentary processes on the surfaces of alluvial fans. Prior studies of alluvial fans have made extensive use of visible images and traditional field-based techniques. As a case study demonstration of this technique, we compare thermal images acquired from the ground and a light aircraft (altitude ~ 5000 ft) to a pre-existing ground-based map of features on the Dolomite Fan in Owens Valley, California. Thermal images from the aircraft were acquired at several times of day to determine how the surface temperatures of the alluvial fan rise and fall throughout a diurnal cycle. We have also acquired thermal images from the ground at 5 minute intervals over the course of a diurnal cycle. The aerial thermal images (ground resolution ~ 2 m/pixel) reveal evidence of a variety of sedimentary processes that have acted on the fan surface. These images show spatial-thermophysical patterns associated with clast-rich and clast-poor debris flows, debris-flow levees and the change in particle size at the toe of the fan. The locations of these features in the thermal images match the locations of the features previously mapped by others using traditional ground-based field sedimentology techniques. All debris flows that are exposed at the fan surface are evident in the aerial thermal images, including those that have been heavily weathered and are difficult to observe in visible images. This case study demonstrates that aerial thermal images can be used to provide reconnaissance of an alluvial fan, suggest what sedimentary processes have most recently acted on the surface of the fan, and to prioritize sites for detailed study on the ground.

KW - alluvial fans

KW - debris flows

KW - remote sensing

KW - thermal inertia

KW - thermal infrared

UR - http://www.scopus.com/inward/record.url?scp=67650621554&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67650621554&partnerID=8YFLogxK

U2 - 10.1016/j.epsl.2009.06.004

DO - 10.1016/j.epsl.2009.06.004

M3 - Article

VL - 285

SP - 124

EP - 130

JO - Earth and Planetary Sciences Letters

JF - Earth and Planetary Sciences Letters

SN - 0012-821X

IS - 1-2

ER -