The Influence of Design Methods on Construction Productivity

Avi Wiezel, Ali Erhan Oztemir

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper presents the results of the study of the influence of the design method on construction productivity in the area of installing the manufacturing tools in cleanroom facilities. Two new concepts were specially introduced to allow the comparison of productivity between the installations of various manufacturing tools. The two concepts are: Index of Complexity (IC) and Work Load Indicator (WLI). The IC is a measurement of the congestion around the tool and conditions for routing the connections. The WLI is the product of the IC and the number of connections of a certain type, such as piping, ductwork or electrical. The man- hours effectively spent by each trade to install various tools have been plotted against the corresponding WLI of each of the tools, and a regression analysis was performed on the resulting curves. The curves represent the expected productivity for tool installation and they are dependent upon the design method used. By comparing the productivity curves of tool installation when 2D design was used with the curves of 3D design we have determined what the level of complexity that warrants the use of 3D versus 2D is. The paper presents the logic behind IC and WLI, as well as the results of the comparison between 2D and 3D design.

Original languageEnglish (US)
Title of host publicationContruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress
EditorsK.R. Molenaar, P.S. Chinowsky
Pages1059-1066
Number of pages8
StatePublished - 2003
EventConstruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress - Honolulu, HI., United States
Duration: Mar 19 2003Mar 21 2003

Other

OtherConstruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress
CountryUnited States
CityHonolulu, HI.
Period3/19/033/21/03

Fingerprint

Productivity
Regression analysis

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Wiezel, A., & Oztemir, A. E. (2003). The Influence of Design Methods on Construction Productivity. In K. R. Molenaar, & P. S. Chinowsky (Eds.), Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress (pp. 1059-1066)

The Influence of Design Methods on Construction Productivity. / Wiezel, Avi; Oztemir, Ali Erhan.

Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress. ed. / K.R. Molenaar; P.S. Chinowsky. 2003. p. 1059-1066.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wiezel, A & Oztemir, AE 2003, The Influence of Design Methods on Construction Productivity. in KR Molenaar & PS Chinowsky (eds), Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress. pp. 1059-1066, Construction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress, Honolulu, HI., United States, 3/19/03.
Wiezel A, Oztemir AE. The Influence of Design Methods on Construction Productivity. In Molenaar KR, Chinowsky PS, editors, Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress. 2003. p. 1059-1066
Wiezel, Avi ; Oztemir, Ali Erhan. / The Influence of Design Methods on Construction Productivity. Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress. editor / K.R. Molenaar ; P.S. Chinowsky. 2003. pp. 1059-1066
@inproceedings{08ff863916ef487689e8497c041ed03b,
title = "The Influence of Design Methods on Construction Productivity",
abstract = "This paper presents the results of the study of the influence of the design method on construction productivity in the area of installing the manufacturing tools in cleanroom facilities. Two new concepts were specially introduced to allow the comparison of productivity between the installations of various manufacturing tools. The two concepts are: Index of Complexity (IC) and Work Load Indicator (WLI). The IC is a measurement of the congestion around the tool and conditions for routing the connections. The WLI is the product of the IC and the number of connections of a certain type, such as piping, ductwork or electrical. The man- hours effectively spent by each trade to install various tools have been plotted against the corresponding WLI of each of the tools, and a regression analysis was performed on the resulting curves. The curves represent the expected productivity for tool installation and they are dependent upon the design method used. By comparing the productivity curves of tool installation when 2D design was used with the curves of 3D design we have determined what the level of complexity that warrants the use of 3D versus 2D is. The paper presents the logic behind IC and WLI, as well as the results of the comparison between 2D and 3D design.",
author = "Avi Wiezel and Oztemir, {Ali Erhan}",
year = "2003",
language = "English (US)",
isbn = "0784406715",
pages = "1059--1066",
editor = "K.R. Molenaar and P.S. Chinowsky",
booktitle = "Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress",

}

TY - GEN

T1 - The Influence of Design Methods on Construction Productivity

AU - Wiezel, Avi

AU - Oztemir, Ali Erhan

PY - 2003

Y1 - 2003

N2 - This paper presents the results of the study of the influence of the design method on construction productivity in the area of installing the manufacturing tools in cleanroom facilities. Two new concepts were specially introduced to allow the comparison of productivity between the installations of various manufacturing tools. The two concepts are: Index of Complexity (IC) and Work Load Indicator (WLI). The IC is a measurement of the congestion around the tool and conditions for routing the connections. The WLI is the product of the IC and the number of connections of a certain type, such as piping, ductwork or electrical. The man- hours effectively spent by each trade to install various tools have been plotted against the corresponding WLI of each of the tools, and a regression analysis was performed on the resulting curves. The curves represent the expected productivity for tool installation and they are dependent upon the design method used. By comparing the productivity curves of tool installation when 2D design was used with the curves of 3D design we have determined what the level of complexity that warrants the use of 3D versus 2D is. The paper presents the logic behind IC and WLI, as well as the results of the comparison between 2D and 3D design.

AB - This paper presents the results of the study of the influence of the design method on construction productivity in the area of installing the manufacturing tools in cleanroom facilities. Two new concepts were specially introduced to allow the comparison of productivity between the installations of various manufacturing tools. The two concepts are: Index of Complexity (IC) and Work Load Indicator (WLI). The IC is a measurement of the congestion around the tool and conditions for routing the connections. The WLI is the product of the IC and the number of connections of a certain type, such as piping, ductwork or electrical. The man- hours effectively spent by each trade to install various tools have been plotted against the corresponding WLI of each of the tools, and a regression analysis was performed on the resulting curves. The curves represent the expected productivity for tool installation and they are dependent upon the design method used. By comparing the productivity curves of tool installation when 2D design was used with the curves of 3D design we have determined what the level of complexity that warrants the use of 3D versus 2D is. The paper presents the logic behind IC and WLI, as well as the results of the comparison between 2D and 3D design.

UR - http://www.scopus.com/inward/record.url?scp=2342434222&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2342434222&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:2342434222

SN - 0784406715

SN - 9780784406717

SP - 1059

EP - 1066

BT - Contruction Research Congress, Winds of Change: Integration and Innovation in Construction, Proceedings of the Congress

A2 - Molenaar, K.R.

A2 - Chinowsky, P.S.

ER -