Staggered nitinol wire actuator array for high linear displacement and force-to-mass ratio

Katelyn Conrad, James Choca, Steven Lathers, Jeffrey LaBelle

Research output: Contribution to journalArticle

1 Scopus citations

Abstract

We present the design and performance of a unique Nitinol (NiTi) actuator design for high linear displacement and force generation through joule heating. The device is comprised of a staggered linear array of NiTi in wire form that, as a shape memory alloy, can achieve linear displacement through material phase change when heated. This change allows the crystal lattice within the material to displace/adjust. The design results in strain levels of 20.4% that are comparable to those of biological muscles and provides potential for additional strain. Three-to seven-staggered NiTi wires are tested to demonstrate the different levels of strain that are achieved with a range of wires in a staggered array. In addition, we measure and compare force generated to the mass of each wire to show system force-to-mass ratio. The effective force to mass for the system is greater than 5500 combined with a seven-wire staggered array. The device shows that a lightweight, high-strain actuator can be developed, and our research demonstrates its potential use in prosthetic actuation.

Original languageEnglish (US)
Pages (from-to)121-129
Number of pages9
JournalCritical Reviews in Biomedical Engineering
Volume47
Issue number2
DOIs
StatePublished - Jan 1 2019

    Fingerprint

Keywords

  • Actuator
  • Biomimicry
  • Nitinol
  • Prosthetic
  • Shape memory alloy
  • Staggered array

ASJC Scopus subject areas

  • Biomedical Engineering

Cite this