Separation and dissolution of Al2O3 inclusions at slag/metal interfaces

S. H. Lee, C. Tse, K. W. Yi, P. Misra, V. Chevrier, C. Orrling, S. Sridhar, A. W. Cramb

Research output: Contribution to journalConference articlepeer-review

63 Scopus citations

Abstract

To achieve better process control and product quality in clean steel manufacturing, it is necessary to understand the underlying processes behind (i) separation of inclusions across slag/metal interfaces and (ii) dissolution of the inclusions in the slag. This paper presents results on both these processes obtained through in situ observations with a confocal scanning laser microscope (CSLM) at steelmaking temperatures. In the case of inclusion separation, it was found that liquid inclusions could be observed to separate across the slag/metal interface and dissolve. Solid Al2O3 inclusions, however, were observed at the slag side of the interface and could be seen to agglomerate. The dissolution rate of slag particles was found to be a function of slag chemistry and temperature and to be controlled by diffusion in the liquid slag.

Original languageEnglish (US)
Pages (from-to)41-48
Number of pages8
JournalJournal of Non-Crystalline Solids
Volume282
Issue number1
DOIs
StatePublished - Apr 2001
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Condensed Matter Physics
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Separation and dissolution of Al<sub>2</sub>O<sub>3</sub> inclusions at slag/metal interfaces'. Together they form a unique fingerprint.

Cite this