适用于深层页岩气井生产模拟和预测的自扩散流热耦合模型

Translated title of the contribution: Self-diffusion flow and heat coupling model applicable to the production simulation and prediction of deep shale gas wells

Yang Xia, Shiming Wei, Yan Jin, Kangping Chen

Research output: Contribution to journalArticlepeer-review

Abstract

Clarifying the flow laws of shale gas under high temperature and high pressure is the prerequisite to accurately predicting the productivity of deep shale gas wells. In this paper, a self-diffusion flow model of flow field and temperature field coupling (referred to as self-diffusion flow and heat coupling model) was established based on the previously proposed self-diffusion flow model, while considering the influence of the temperature field change. Then, its calculation result was compared with that of the flow model based on Darcy's law and Knudsen diffusion (referred to as modified Darcy flow model). Based on the self-diffusion flow and heat coupling model, the self-diffusion flow behaviors of deep shale gas under the influence of temperature field change were analyzed, and the influence of bottom hole temperature on the degree of reserve recovery of deep shale gas was discussed. Finally, the self-diffusion flow and heat coupling model was applied to simulate the production of one shale-gas horizontal well in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in the Changning Block of the Sichuan Basin. And the following research results were obtained. First, at the same parameters, the shale gas production calculated by the self-diffusion flow and heat coupling model is higher than the result calculated by the modified Darcy flow model. Second, when temperature field change is taken into consideration, the self-diffusion coefficient profile presents a peak, the gas density profile presents a valley and the data points corresponding to the peak/valley move synchronously to the internal formation, which indicates that the self-diffusion coefficient influences the gas mass transfer rate, and the influence range of near well low temperature on gas self-diffusion increases continuously as the production continues. Third, when the bottom hole temperature is lower than the formation temperature, the self-diffusion coefficient of the gas near the well decreases and the gas is blocked near the well, which reduces the gas well production. Fourth, the production simulation result of the case well shows that the self-diffusion flow and heat coupling model can predict the production of deep shale gas more accurately if temperature field change is taken into consideration. In conclusion, the self-diffusion flow and heat coupling model established in this paper is of higher reliability and accuracy and can be used for productivity simulation and prediction of deep shale gas wells.The conclusion of this paper has certain guiding significance for deep shale gas production and gas well productivity prediction.

Translated title of the contributionSelf-diffusion flow and heat coupling model applicable to the production simulation and prediction of deep shale gas wells
Original languageChinese (Traditional)
Pages (from-to)111-118
Number of pages8
JournalTianranqi Gongye/Natural Gas Industry
Volume41
Issue number2
DOIs
StatePublished - Feb 25 2021
Externally publishedYes

Keywords

  • Deep shale gas
  • Gas well productivity prediction
  • Near well blockage
  • Near well low temperature
  • Self-diffusion flow and heat coupling model
  • Temperature field change

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Geotechnical Engineering and Engineering Geology

Fingerprint Dive into the research topics of 'Self-diffusion flow and heat coupling model applicable to the production simulation and prediction of deep shale gas wells'. Together they form a unique fingerprint.

Cite this