Seawater desalination performance of MFI type membranes made by secondary growth

Mikel C. Duke, Jessica O'Brien-Abraham, Nicholas Milne, Bo Zhu, Jerry Lin, João C. Diniz da Costa

Research output: Contribution to journalArticle

102 Citations (Scopus)

Abstract

Seawater desalination is now commonly performed using membrane technology but new materials research is however needed to address issues such as membrane fouling. Ceramic materials such as zeolites are capable of providing the required desalination properties while being potentially tolerant to waters which readily foul polymer membranes and/or can withstand more cost effective cleaning methods. In this paper, we developed Silicalite and ZSM-5 zeolite membranes and tested desalination using the thermally based pervaporation, and more common reverse osmosis (RO) operation modes. Zeolite membranes were synthesised by the template-free secondary growth technique with varying Si/Al ratios. X-ray diffraction spectra of all membranes showed randomly oriented MFI structure. For intact membrane films, gas permeation was not measurable at room temperature until membrane was first heated to at least 125 °C under dry helium implying minimal defects and zeolite pore plugging by water. In pervaporation with 3.8 wt% seawater feed, zeolites containing alumina actively rejected ions, displaying equivalent rejections exceeding 99%. Flux typically decreased after introduction of seawater, but the membrane with Si/Al ratio of 100 uniquely showed a 30% increase in flux which could only be explained by an ion exchange/interaction mechanism which opened the zeolite structure to permeation. Optimal temperature for pervaporation was found to be 80 °C, where high rejections persisted, and flux increased to 0.72 kg m-2 h-1. In RO, the Silicalite membrane achieved highest rejections, but had not reached steady state after 25 h of operation. Negative rejections were initially observed, but eventually crossed into positive values over time. Despite the complexity of water and multiple ion diffusion through molecular dimensioned zeolites with complex charged surfaces, MFI zeolite membranes with tailored Si/Al ratios are ideal candidates for desalination.

Original languageEnglish (US)
Pages (from-to)343-350
Number of pages8
JournalSeparation and Purification Technology
Volume68
Issue number3
DOIs
StatePublished - Aug 25 2009

Fingerprint

Desalination
Zeolites
Seawater
Membranes
Pervaporation
Reverse osmosis
Fluxes
Permeation
Water
Ions
Membrane technology
Helium
Membrane fouling
Aluminum Oxide
Exchange interactions
Ceramic materials
Cleaning
Ion exchange
Polymers
Alumina

Keywords

  • Ceramic membranes
  • Desalination
  • Membrane distillation
  • MFI zeolite
  • Pervaporation
  • Reverse osmosis

ASJC Scopus subject areas

  • Analytical Chemistry
  • Filtration and Separation

Cite this

Seawater desalination performance of MFI type membranes made by secondary growth. / Duke, Mikel C.; O'Brien-Abraham, Jessica; Milne, Nicholas; Zhu, Bo; Lin, Jerry; Diniz da Costa, João C.

In: Separation and Purification Technology, Vol. 68, No. 3, 25.08.2009, p. 343-350.

Research output: Contribution to journalArticle

Duke, Mikel C. ; O'Brien-Abraham, Jessica ; Milne, Nicholas ; Zhu, Bo ; Lin, Jerry ; Diniz da Costa, João C. / Seawater desalination performance of MFI type membranes made by secondary growth. In: Separation and Purification Technology. 2009 ; Vol. 68, No. 3. pp. 343-350.
@article{aaa24be8fdae4e6cb9a4c799d27facec,
title = "Seawater desalination performance of MFI type membranes made by secondary growth",
abstract = "Seawater desalination is now commonly performed using membrane technology but new materials research is however needed to address issues such as membrane fouling. Ceramic materials such as zeolites are capable of providing the required desalination properties while being potentially tolerant to waters which readily foul polymer membranes and/or can withstand more cost effective cleaning methods. In this paper, we developed Silicalite and ZSM-5 zeolite membranes and tested desalination using the thermally based pervaporation, and more common reverse osmosis (RO) operation modes. Zeolite membranes were synthesised by the template-free secondary growth technique with varying Si/Al ratios. X-ray diffraction spectra of all membranes showed randomly oriented MFI structure. For intact membrane films, gas permeation was not measurable at room temperature until membrane was first heated to at least 125 °C under dry helium implying minimal defects and zeolite pore plugging by water. In pervaporation with 3.8 wt{\%} seawater feed, zeolites containing alumina actively rejected ions, displaying equivalent rejections exceeding 99{\%}. Flux typically decreased after introduction of seawater, but the membrane with Si/Al ratio of 100 uniquely showed a 30{\%} increase in flux which could only be explained by an ion exchange/interaction mechanism which opened the zeolite structure to permeation. Optimal temperature for pervaporation was found to be 80 °C, where high rejections persisted, and flux increased to 0.72 kg m-2 h-1. In RO, the Silicalite membrane achieved highest rejections, but had not reached steady state after 25 h of operation. Negative rejections were initially observed, but eventually crossed into positive values over time. Despite the complexity of water and multiple ion diffusion through molecular dimensioned zeolites with complex charged surfaces, MFI zeolite membranes with tailored Si/Al ratios are ideal candidates for desalination.",
keywords = "Ceramic membranes, Desalination, Membrane distillation, MFI zeolite, Pervaporation, Reverse osmosis",
author = "Duke, {Mikel C.} and Jessica O'Brien-Abraham and Nicholas Milne and Bo Zhu and Jerry Lin and {Diniz da Costa}, {Jo{\~a}o C.}",
year = "2009",
month = "8",
day = "25",
doi = "10.1016/j.seppur.2009.06.003",
language = "English (US)",
volume = "68",
pages = "343--350",
journal = "Separation and Purification Technology",
issn = "1383-5866",
publisher = "Elsevier",
number = "3",

}

TY - JOUR

T1 - Seawater desalination performance of MFI type membranes made by secondary growth

AU - Duke, Mikel C.

AU - O'Brien-Abraham, Jessica

AU - Milne, Nicholas

AU - Zhu, Bo

AU - Lin, Jerry

AU - Diniz da Costa, João C.

PY - 2009/8/25

Y1 - 2009/8/25

N2 - Seawater desalination is now commonly performed using membrane technology but new materials research is however needed to address issues such as membrane fouling. Ceramic materials such as zeolites are capable of providing the required desalination properties while being potentially tolerant to waters which readily foul polymer membranes and/or can withstand more cost effective cleaning methods. In this paper, we developed Silicalite and ZSM-5 zeolite membranes and tested desalination using the thermally based pervaporation, and more common reverse osmosis (RO) operation modes. Zeolite membranes were synthesised by the template-free secondary growth technique with varying Si/Al ratios. X-ray diffraction spectra of all membranes showed randomly oriented MFI structure. For intact membrane films, gas permeation was not measurable at room temperature until membrane was first heated to at least 125 °C under dry helium implying minimal defects and zeolite pore plugging by water. In pervaporation with 3.8 wt% seawater feed, zeolites containing alumina actively rejected ions, displaying equivalent rejections exceeding 99%. Flux typically decreased after introduction of seawater, but the membrane with Si/Al ratio of 100 uniquely showed a 30% increase in flux which could only be explained by an ion exchange/interaction mechanism which opened the zeolite structure to permeation. Optimal temperature for pervaporation was found to be 80 °C, where high rejections persisted, and flux increased to 0.72 kg m-2 h-1. In RO, the Silicalite membrane achieved highest rejections, but had not reached steady state after 25 h of operation. Negative rejections were initially observed, but eventually crossed into positive values over time. Despite the complexity of water and multiple ion diffusion through molecular dimensioned zeolites with complex charged surfaces, MFI zeolite membranes with tailored Si/Al ratios are ideal candidates for desalination.

AB - Seawater desalination is now commonly performed using membrane technology but new materials research is however needed to address issues such as membrane fouling. Ceramic materials such as zeolites are capable of providing the required desalination properties while being potentially tolerant to waters which readily foul polymer membranes and/or can withstand more cost effective cleaning methods. In this paper, we developed Silicalite and ZSM-5 zeolite membranes and tested desalination using the thermally based pervaporation, and more common reverse osmosis (RO) operation modes. Zeolite membranes were synthesised by the template-free secondary growth technique with varying Si/Al ratios. X-ray diffraction spectra of all membranes showed randomly oriented MFI structure. For intact membrane films, gas permeation was not measurable at room temperature until membrane was first heated to at least 125 °C under dry helium implying minimal defects and zeolite pore plugging by water. In pervaporation with 3.8 wt% seawater feed, zeolites containing alumina actively rejected ions, displaying equivalent rejections exceeding 99%. Flux typically decreased after introduction of seawater, but the membrane with Si/Al ratio of 100 uniquely showed a 30% increase in flux which could only be explained by an ion exchange/interaction mechanism which opened the zeolite structure to permeation. Optimal temperature for pervaporation was found to be 80 °C, where high rejections persisted, and flux increased to 0.72 kg m-2 h-1. In RO, the Silicalite membrane achieved highest rejections, but had not reached steady state after 25 h of operation. Negative rejections were initially observed, but eventually crossed into positive values over time. Despite the complexity of water and multiple ion diffusion through molecular dimensioned zeolites with complex charged surfaces, MFI zeolite membranes with tailored Si/Al ratios are ideal candidates for desalination.

KW - Ceramic membranes

KW - Desalination

KW - Membrane distillation

KW - MFI zeolite

KW - Pervaporation

KW - Reverse osmosis

UR - http://www.scopus.com/inward/record.url?scp=68049144641&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68049144641&partnerID=8YFLogxK

U2 - 10.1016/j.seppur.2009.06.003

DO - 10.1016/j.seppur.2009.06.003

M3 - Article

AN - SCOPUS:68049144641

VL - 68

SP - 343

EP - 350

JO - Separation and Purification Technology

JF - Separation and Purification Technology

SN - 1383-5866

IS - 3

ER -