Physical realization and reflection phase characteristics of a flexible high impedance surface

Ahmet C. Durgun; Constantine Balanis; Craig R. Birtcher

doi:10.1109/APS.2011.5996856

Physical realization and reflection phase characteristics of a flexible high impedance surface

Ahmet C. Durgun, Constantine Balanis, Craig R. Birtcher

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

5 Scopus citations

Abstract

This paper presents the fabrication and reflection phase measurements of a flexible high impedance surface (FHIS). The surface is fabricated by using DuPont pyralux polyimide as the substrate. Cyanoacrylate is used to adhere the samples of polyimide. The reflection phase response of the FHIS, which is curved in the form of a cylinder, is measured in the anechoic chamber and compared with that of the flat FHIS. As expected, reflection phase characteristics of the curved FHIS are polarization dependent and slightly different than those of the flat one. The measured reflection phase characteristics of the curved FHIS will be compared with simulations which presently are under consideration.

Original language	English (US)
Title of host publication	2011 IEEE International Symposium on Antennas and Propagation - Proceedings
Pages	1844-1847
Number of pages	4
DOIs	https://doi.org/10.1109/APS.2011.5996856
State	Published - 2011
Event	2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011 - Spokane, WA, United States Duration: Jul 3 2011 → Jul 8 2011

Publication series

Name	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
ISSN (Print)	1522-3965

Other

Other	2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011
Country/Territory	United States
City	Spokane, WA
Period	7/3/11 → 7/8/11

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/APS.2011.5996856

Cite this

Durgun, A. C., Balanis, C., & Birtcher, C. R. (2011). Physical realization and reflection phase characteristics of a flexible high impedance surface. In 2011 IEEE International Symposium on Antennas and Propagation - Proceedings (pp. 1844-1847). Article 5996856 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). https://doi.org/10.1109/APS.2011.5996856

Physical realization and reflection phase characteristics of a flexible high impedance surface. / Durgun, Ahmet C.; Balanis, Constantine; Birtcher, Craig R.
2011 IEEE International Symposium on Antennas and Propagation - Proceedings. 2011. p. 1844-1847 5996856 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Durgun, AC, Balanis, C & Birtcher, CR 2011, Physical realization and reflection phase characteristics of a flexible high impedance surface. in 2011 IEEE International Symposium on Antennas and Propagation - Proceedings., 5996856, IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), pp. 1844-1847, 2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011, Spokane, WA, United States, 7/3/11. https://doi.org/10.1109/APS.2011.5996856

@inproceedings{376f4135cbb847adb2b0a4a4b0e1a65a,

title = "Physical realization and reflection phase characteristics of a flexible high impedance surface",

abstract = "This paper presents the fabrication and reflection phase measurements of a flexible high impedance surface (FHIS). The surface is fabricated by using DuPont pyralux polyimide as the substrate. Cyanoacrylate is used to adhere the samples of polyimide. The reflection phase response of the FHIS, which is curved in the form of a cylinder, is measured in the anechoic chamber and compared with that of the flat FHIS. As expected, reflection phase characteristics of the curved FHIS are polarization dependent and slightly different than those of the flat one. The measured reflection phase characteristics of the curved FHIS will be compared with simulations which presently are under consideration.",

author = "Durgun, {Ahmet C.} and Constantine Balanis and Birtcher, {Craig R.}",

year = "2011",

doi = "10.1109/APS.2011.5996856",

language = "English (US)",

isbn = "9781424495634",

series = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",

pages = "1844--1847",

booktitle = "2011 IEEE International Symposium on Antennas and Propagation - Proceedings",

note = "2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011 ; Conference date: 03-07-2011 Through 08-07-2011",

}

TY - GEN

T1 - Physical realization and reflection phase characteristics of a flexible high impedance surface

AU - Durgun, Ahmet C.

AU - Balanis, Constantine

AU - Birtcher, Craig R.

PY - 2011

Y1 - 2011

N2 - This paper presents the fabrication and reflection phase measurements of a flexible high impedance surface (FHIS). The surface is fabricated by using DuPont pyralux polyimide as the substrate. Cyanoacrylate is used to adhere the samples of polyimide. The reflection phase response of the FHIS, which is curved in the form of a cylinder, is measured in the anechoic chamber and compared with that of the flat FHIS. As expected, reflection phase characteristics of the curved FHIS are polarization dependent and slightly different than those of the flat one. The measured reflection phase characteristics of the curved FHIS will be compared with simulations which presently are under consideration.

AB - This paper presents the fabrication and reflection phase measurements of a flexible high impedance surface (FHIS). The surface is fabricated by using DuPont pyralux polyimide as the substrate. Cyanoacrylate is used to adhere the samples of polyimide. The reflection phase response of the FHIS, which is curved in the form of a cylinder, is measured in the anechoic chamber and compared with that of the flat FHIS. As expected, reflection phase characteristics of the curved FHIS are polarization dependent and slightly different than those of the flat one. The measured reflection phase characteristics of the curved FHIS will be compared with simulations which presently are under consideration.

UR - http://www.scopus.com/inward/record.url?scp=80054971378&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80054971378&partnerID=8YFLogxK

U2 - 10.1109/APS.2011.5996856

DO - 10.1109/APS.2011.5996856

M3 - Conference contribution

AN - SCOPUS:80054971378

SN - 9781424495634

T3 - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

SP - 1844

EP - 1847

BT - 2011 IEEE International Symposium on Antennas and Propagation - Proceedings

T2 - 2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011

Y2 - 3 July 2011 through 8 July 2011

ER -

Physical realization and reflection phase characteristics of a flexible high impedance surface

Abstract

Publication series

Other

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this