Optimal transmission switching with contingency analysis

Kory W. Hedman; Richard P. O'Neill; Emily Bartholomew Fisher; Shmuel S. Oren

doi:10.1109/TPWRS.2009.2020530

Optimal transmission switching with contingency analysis

Kory W. Hedman, Richard P. O'Neill, Emily Bartholomew Fisher, Shmuel S. Oren

Research output: Contribution to journal › Article › peer-review

357 Scopus citations

Abstract

In this paper, we analyze the N-1 reliable dc optimal dispatch with transmission switching. The model is a mixed integer program (MIP) with binary variables representing the state of the transmission element (line or transformer) and the model can be used for planning and/or operations. We then attempt to find solutions to this problem using the IEEE 118-bus and the RTS 96 system test cases. The IEEE 118-bus test case is analyzed at varying load levels. Using simple heuristics, we demonstrate that these networks can be operated to satisfy N-1 standards while cutting costs by incorporating transmission switching into the dispatch. In some cases, the percent savings from transmission switching was higher with an N-1 DCOPF formulation than with a DCOPF formulation.

Original language	English (US)
Pages (from-to)	1577-1586
Number of pages	10
Journal	IEEE Transactions on Power Systems
Volume	24
Issue number	3
DOIs	https://doi.org/10.1109/TPWRS.2009.2020530
State	Published - 2009
Externally published	Yes

Keywords

Integer programming
Power generation dispatch
Power system economics
Power system reliability
Power transmission control
Power transmission economics
Transmission planning

ASJC Scopus subject areas

Energy Engineering and Power Technology
Electrical and Electronic Engineering

Access to Document

10.1109/TPWRS.2009.2020530

Cite this

@article{30efa2f721be4b04a06465d17947c8b9,

title = "Optimal transmission switching with contingency analysis",

abstract = "In this paper, we analyze the N-1 reliable dc optimal dispatch with transmission switching. The model is a mixed integer program (MIP) with binary variables representing the state of the transmission element (line or transformer) and the model can be used for planning and/or operations. We then attempt to find solutions to this problem using the IEEE 118-bus and the RTS 96 system test cases. The IEEE 118-bus test case is analyzed at varying load levels. Using simple heuristics, we demonstrate that these networks can be operated to satisfy N-1 standards while cutting costs by incorporating transmission switching into the dispatch. In some cases, the percent savings from transmission switching was higher with an N-1 DCOPF formulation than with a DCOPF formulation.",

keywords = "Integer programming, Power generation dispatch, Power system economics, Power system reliability, Power transmission control, Power transmission economics, Transmission planning",

author = "Hedman, {Kory W.} and O'Neill, {Richard P.} and Fisher, {Emily Bartholomew} and Oren, {Shmuel S.}",

year = "2009",

doi = "10.1109/TPWRS.2009.2020530",

language = "English (US)",

volume = "24",

pages = "1577--1586",

journal = "IEEE Transactions on Power Systems",

issn = "0885-8950",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

TY - JOUR

T1 - Optimal transmission switching with contingency analysis

AU - Hedman, Kory W.

AU - O'Neill, Richard P.

AU - Fisher, Emily Bartholomew

AU - Oren, Shmuel S.

PY - 2009

Y1 - 2009

N2 - In this paper, we analyze the N-1 reliable dc optimal dispatch with transmission switching. The model is a mixed integer program (MIP) with binary variables representing the state of the transmission element (line or transformer) and the model can be used for planning and/or operations. We then attempt to find solutions to this problem using the IEEE 118-bus and the RTS 96 system test cases. The IEEE 118-bus test case is analyzed at varying load levels. Using simple heuristics, we demonstrate that these networks can be operated to satisfy N-1 standards while cutting costs by incorporating transmission switching into the dispatch. In some cases, the percent savings from transmission switching was higher with an N-1 DCOPF formulation than with a DCOPF formulation.

AB - In this paper, we analyze the N-1 reliable dc optimal dispatch with transmission switching. The model is a mixed integer program (MIP) with binary variables representing the state of the transmission element (line or transformer) and the model can be used for planning and/or operations. We then attempt to find solutions to this problem using the IEEE 118-bus and the RTS 96 system test cases. The IEEE 118-bus test case is analyzed at varying load levels. Using simple heuristics, we demonstrate that these networks can be operated to satisfy N-1 standards while cutting costs by incorporating transmission switching into the dispatch. In some cases, the percent savings from transmission switching was higher with an N-1 DCOPF formulation than with a DCOPF formulation.

KW - Integer programming

KW - Power generation dispatch

KW - Power system economics

KW - Power system reliability

KW - Power transmission control

KW - Power transmission economics

KW - Transmission planning

UR - http://www.scopus.com/inward/record.url?scp=68349157710&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68349157710&partnerID=8YFLogxK

U2 - 10.1109/TPWRS.2009.2020530

DO - 10.1109/TPWRS.2009.2020530

M3 - Article

AN - SCOPUS:68349157710

SN - 0885-8950

VL - 24

SP - 1577

EP - 1586

JO - IEEE Transactions on Power Systems

JF - IEEE Transactions on Power Systems

IS - 3

ER -

Optimal transmission switching with contingency analysis

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this