Novel loss and harmonic minimized vector modulation for a current-fed quasi-Z-source inverter in HEV motor drive application

Qin Lei, Dong Cao, Fang Zheng Peng

Research output: Contribution to journalArticle

56 Citations (Scopus)

Abstract

The recently proposed current-fed quasi-Z-source inverter (QZSI) can buck and boost voltage and provide bidirectional power flow . A crucial criterion for the size of three-phase PWM converters is the cooling of the power semiconductors and thus determination of power dissipation at certain operating points. In the modified space vector PWM method (SVPWM) control method for this circuit, different PWM sequences can lead to different switching loss, current ripple, total harmonic distortion, and also the voltage spike on the switching devices. In order to select the best PWM sequence to obtain the best performance and efficiency, a complete analysis and calculation for the four mentioned criterions are presented for different sequences. For each criterion, the best sequences are selected to obtain better performance. Finally, the optimized PWM sequence in the modified SVPWM control for this circuit is selected with the optimized hardware design together to achieve the best efficiency at the full operation range. The optimized hardware design has been built in the lab, including the optimal design of the coupled inductor, optimal design and selection of Z-source capacitors and output capacitors, the selection of Z-source diode, and the final layout of the hardware. In order to bring the prototype into real application in a hybrid electrical vehicle , the inverter efficiency is measured according to the motor P-V curve. The estimated efficiency curve and experiment results are plot and compared. The best efficiency at 15 kW reaches 97.6% at unity voltage gain.

Original languageEnglish (US)
Article number6515380
Pages (from-to)1344-1357
Number of pages14
JournalIEEE Transactions on Power Electronics
Volume29
Issue number3
DOIs
StatePublished - 2014
Externally publishedYes

Fingerprint

Pulse width modulation
Modulation
Vector spaces
Hardware
Electric potential
Capacitors
Networks (circuits)
Harmonic distortion
Energy dissipation
Diodes
Semiconductor materials
Cooling
Experiments
Optimal design

Keywords

  • Current source
  • quasi-Z-source
  • space vector PWM method (SVPWM)
  • switching loss
  • THD
  • vector placement

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Novel loss and harmonic minimized vector modulation for a current-fed quasi-Z-source inverter in HEV motor drive application. / Lei, Qin; Cao, Dong; Peng, Fang Zheng.

In: IEEE Transactions on Power Electronics, Vol. 29, No. 3, 6515380, 2014, p. 1344-1357.

Research output: Contribution to journalArticle

@article{2eaabae182914309816d8587daac8f79,
title = "Novel loss and harmonic minimized vector modulation for a current-fed quasi-Z-source inverter in HEV motor drive application",
abstract = "The recently proposed current-fed quasi-Z-source inverter (QZSI) can buck and boost voltage and provide bidirectional power flow . A crucial criterion for the size of three-phase PWM converters is the cooling of the power semiconductors and thus determination of power dissipation at certain operating points. In the modified space vector PWM method (SVPWM) control method for this circuit, different PWM sequences can lead to different switching loss, current ripple, total harmonic distortion, and also the voltage spike on the switching devices. In order to select the best PWM sequence to obtain the best performance and efficiency, a complete analysis and calculation for the four mentioned criterions are presented for different sequences. For each criterion, the best sequences are selected to obtain better performance. Finally, the optimized PWM sequence in the modified SVPWM control for this circuit is selected with the optimized hardware design together to achieve the best efficiency at the full operation range. The optimized hardware design has been built in the lab, including the optimal design of the coupled inductor, optimal design and selection of Z-source capacitors and output capacitors, the selection of Z-source diode, and the final layout of the hardware. In order to bring the prototype into real application in a hybrid electrical vehicle , the inverter efficiency is measured according to the motor P-V curve. The estimated efficiency curve and experiment results are plot and compared. The best efficiency at 15 kW reaches 97.6{\%} at unity voltage gain.",
keywords = "Current source, quasi-Z-source, space vector PWM method (SVPWM), switching loss, THD, vector placement",
author = "Qin Lei and Dong Cao and Peng, {Fang Zheng}",
year = "2014",
doi = "10.1109/TPEL.2013.2260173",
language = "English (US)",
volume = "29",
pages = "1344--1357",
journal = "IEEE Transactions on Power Electronics",
issn = "0885-8993",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Novel loss and harmonic minimized vector modulation for a current-fed quasi-Z-source inverter in HEV motor drive application

AU - Lei, Qin

AU - Cao, Dong

AU - Peng, Fang Zheng

PY - 2014

Y1 - 2014

N2 - The recently proposed current-fed quasi-Z-source inverter (QZSI) can buck and boost voltage and provide bidirectional power flow . A crucial criterion for the size of three-phase PWM converters is the cooling of the power semiconductors and thus determination of power dissipation at certain operating points. In the modified space vector PWM method (SVPWM) control method for this circuit, different PWM sequences can lead to different switching loss, current ripple, total harmonic distortion, and also the voltage spike on the switching devices. In order to select the best PWM sequence to obtain the best performance and efficiency, a complete analysis and calculation for the four mentioned criterions are presented for different sequences. For each criterion, the best sequences are selected to obtain better performance. Finally, the optimized PWM sequence in the modified SVPWM control for this circuit is selected with the optimized hardware design together to achieve the best efficiency at the full operation range. The optimized hardware design has been built in the lab, including the optimal design of the coupled inductor, optimal design and selection of Z-source capacitors and output capacitors, the selection of Z-source diode, and the final layout of the hardware. In order to bring the prototype into real application in a hybrid electrical vehicle , the inverter efficiency is measured according to the motor P-V curve. The estimated efficiency curve and experiment results are plot and compared. The best efficiency at 15 kW reaches 97.6% at unity voltage gain.

AB - The recently proposed current-fed quasi-Z-source inverter (QZSI) can buck and boost voltage and provide bidirectional power flow . A crucial criterion for the size of three-phase PWM converters is the cooling of the power semiconductors and thus determination of power dissipation at certain operating points. In the modified space vector PWM method (SVPWM) control method for this circuit, different PWM sequences can lead to different switching loss, current ripple, total harmonic distortion, and also the voltage spike on the switching devices. In order to select the best PWM sequence to obtain the best performance and efficiency, a complete analysis and calculation for the four mentioned criterions are presented for different sequences. For each criterion, the best sequences are selected to obtain better performance. Finally, the optimized PWM sequence in the modified SVPWM control for this circuit is selected with the optimized hardware design together to achieve the best efficiency at the full operation range. The optimized hardware design has been built in the lab, including the optimal design of the coupled inductor, optimal design and selection of Z-source capacitors and output capacitors, the selection of Z-source diode, and the final layout of the hardware. In order to bring the prototype into real application in a hybrid electrical vehicle , the inverter efficiency is measured according to the motor P-V curve. The estimated efficiency curve and experiment results are plot and compared. The best efficiency at 15 kW reaches 97.6% at unity voltage gain.

KW - Current source

KW - quasi-Z-source

KW - space vector PWM method (SVPWM)

KW - switching loss

KW - THD

KW - vector placement

UR - http://www.scopus.com/inward/record.url?scp=84885114560&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84885114560&partnerID=8YFLogxK

U2 - 10.1109/TPEL.2013.2260173

DO - 10.1109/TPEL.2013.2260173

M3 - Article

AN - SCOPUS:84885114560

VL - 29

SP - 1344

EP - 1357

JO - IEEE Transactions on Power Electronics

JF - IEEE Transactions on Power Electronics

SN - 0885-8993

IS - 3

M1 - 6515380

ER -