Nec And Esp Codes: Guidelines, Limitations, And Emc Applications

Jian Peng; Constantine Balanis; George C. Barber

doi:10.1109/15.229428

Nec And Esp Codes: Guidelines, Limitations, And Emc Applications

Jian Peng, Constantine Balanis, George C. Barber

Electrical Engineering

Research output: Contribution to journal › Article › peer-review

13 Scopus citations

Abstract

This article addresses the computer modeling and simulation of EMC problems of complex structures, using the NEC and ESP moment method codes. The rules and guidelines of modeling using the two codes are summarized. In addition, visualization and automation of the modeling process are made possible through an interface computer program GEOM developed at Arizona State University. Finally, the interference between two wire antennas mounted on a complex helicopter model is given as an example of using these codes in EMC applications.

Original language	English (US)
Pages (from-to)	124-133
Number of pages	10
Journal	IEEE Transactions on Electromagnetic Compatibility
Volume	35
Issue number	2
DOIs	https://doi.org/10.1109/15.229428
State	Published - May 1993

ASJC Scopus subject areas

Atomic and Molecular Physics, and Optics
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/15.229428

Cite this

@article{b2b120bac1a5499fa02ae1ef184fa11f,

title = "Nec And Esp Codes: Guidelines, Limitations, And Emc Applications",

abstract = "This article addresses the computer modeling and simulation of EMC problems of complex structures, using the NEC and ESP moment method codes. The rules and guidelines of modeling using the two codes are summarized. In addition, visualization and automation of the modeling process are made possible through an interface computer program GEOM developed at Arizona State University. Finally, the interference between two wire antennas mounted on a complex helicopter model is given as an example of using these codes in EMC applications.",

author = "Jian Peng and Constantine Balanis and Barber, {George C.}",

note = "Funding Information: Manuscript received April 14, 1992; revised September 28, 1992. This work was sponsored by the Advanced Helicopter Electromagnetics (AHE) Industrial Associates Program. J. Peng and C. A. Balanis are with the Department of Electrical Engineering, Telecommunications Research Center, Arizona State University, Tempe, AZ 85287-7206. G. C. Barber is with the AVRADA Joint Research Programs Office, NASA Langley Research Center, Hampton, VA 23601-0001. IEEE Log Number 9206660.",

year = "1993",

month = may,

doi = "10.1109/15.229428",

language = "English (US)",

volume = "35",

pages = "124--133",

journal = "IEEE Transactions on Electromagnetic Compatibility",

issn = "0018-9375",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Nec And Esp Codes

T2 - Guidelines, Limitations, And Emc Applications

AU - Peng, Jian

AU - Balanis, Constantine

AU - Barber, George C.

N1 - Funding Information: Manuscript received April 14, 1992; revised September 28, 1992. This work was sponsored by the Advanced Helicopter Electromagnetics (AHE) Industrial Associates Program. J. Peng and C. A. Balanis are with the Department of Electrical Engineering, Telecommunications Research Center, Arizona State University, Tempe, AZ 85287-7206. G. C. Barber is with the AVRADA Joint Research Programs Office, NASA Langley Research Center, Hampton, VA 23601-0001. IEEE Log Number 9206660.

PY - 1993/5

Y1 - 1993/5

N2 - This article addresses the computer modeling and simulation of EMC problems of complex structures, using the NEC and ESP moment method codes. The rules and guidelines of modeling using the two codes are summarized. In addition, visualization and automation of the modeling process are made possible through an interface computer program GEOM developed at Arizona State University. Finally, the interference between two wire antennas mounted on a complex helicopter model is given as an example of using these codes in EMC applications.

AB - This article addresses the computer modeling and simulation of EMC problems of complex structures, using the NEC and ESP moment method codes. The rules and guidelines of modeling using the two codes are summarized. In addition, visualization and automation of the modeling process are made possible through an interface computer program GEOM developed at Arizona State University. Finally, the interference between two wire antennas mounted on a complex helicopter model is given as an example of using these codes in EMC applications.

UR - http://www.scopus.com/inward/record.url?scp=0027595731&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027595731&partnerID=8YFLogxK

U2 - 10.1109/15.229428

DO - 10.1109/15.229428

M3 - Article

AN - SCOPUS:0027595731

SN - 0018-9375

VL - 35

SP - 124

EP - 133

JO - IEEE Transactions on Electromagnetic Compatibility

JF - IEEE Transactions on Electromagnetic Compatibility

IS - 2

ER -

Nec And Esp Codes: Guidelines, Limitations, And Emc Applications

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this