Modeling and simulation of the Michigan aerospace autonomous satellite docking system II

Daniel Rivera, Pejmun Motaghedi, Anthony Hays

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Abstract

The scope of the analysis was to determine the capability of the Michigan Aerospace Corporation (MAC) Autonomous Docking Satellite System II (referred to as ' ASDS' for the remainder of this paper), and to develop and mature the I concept. The integrated system model included detailed subsystem models. A cable model was developed from the test data that resulted in good correlation. A high fidelity subsystem model of the cam resistance force was modeled. The integrated system model also includes contact definitions, final latching/locking definition, and various sensors. Over 3,000 cases were analyzed to identify areas where the MAC docking concept can be improved. Sensitivity and Monte Carlo studies were completed to understand the mechanism's capture capability, determine subsystem requirements, and evolve the design for improved performance.

Original languageEnglish (US)
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
EditorsP. Motaghedi
Pages82-91
Number of pages10
Volume5799
DOIs
StatePublished - 2005
Externally publishedYes
EventModeling, Simulation, and Verification of Space-based Systems II - Orlando, FL, United States
Duration: Mar 31 2005Mar 31 2005

Other

OtherModeling, Simulation, and Verification of Space-based Systems II
CountryUnited States
CityOrlando, FL
Period3/31/053/31/05

Fingerprint

Satellites
simulation
autonomous docking
cams
Cams
cables
locking
Industry
Cables
requirements
sensitivity
sensors
Sensors

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Rivera, D., Motaghedi, P., & Hays, A. (2005). Modeling and simulation of the Michigan aerospace autonomous satellite docking system II. In P. Motaghedi (Ed.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 5799, pp. 82-91). [11] https://doi.org/10.1117/12.606227

Modeling and simulation of the Michigan aerospace autonomous satellite docking system II. / Rivera, Daniel; Motaghedi, Pejmun; Hays, Anthony.

Proceedings of SPIE - The International Society for Optical Engineering. ed. / P. Motaghedi. Vol. 5799 2005. p. 82-91 11.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rivera, D, Motaghedi, P & Hays, A 2005, Modeling and simulation of the Michigan aerospace autonomous satellite docking system II. in P Motaghedi (ed.), Proceedings of SPIE - The International Society for Optical Engineering. vol. 5799, 11, pp. 82-91, Modeling, Simulation, and Verification of Space-based Systems II, Orlando, FL, United States, 3/31/05. https://doi.org/10.1117/12.606227
Rivera D, Motaghedi P, Hays A. Modeling and simulation of the Michigan aerospace autonomous satellite docking system II. In Motaghedi P, editor, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 5799. 2005. p. 82-91. 11 https://doi.org/10.1117/12.606227
Rivera, Daniel ; Motaghedi, Pejmun ; Hays, Anthony. / Modeling and simulation of the Michigan aerospace autonomous satellite docking system II. Proceedings of SPIE - The International Society for Optical Engineering. editor / P. Motaghedi. Vol. 5799 2005. pp. 82-91
@inproceedings{27a546610ce4448da87aae7f631aa938,
title = "Modeling and simulation of the Michigan aerospace autonomous satellite docking system II",
abstract = "The scope of the analysis was to determine the capability of the Michigan Aerospace Corporation (MAC) Autonomous Docking Satellite System II (referred to as ' ASDS' for the remainder of this paper), and to develop and mature the I concept. The integrated system model included detailed subsystem models. A cable model was developed from the test data that resulted in good correlation. A high fidelity subsystem model of the cam resistance force was modeled. The integrated system model also includes contact definitions, final latching/locking definition, and various sensors. Over 3,000 cases were analyzed to identify areas where the MAC docking concept can be improved. Sensitivity and Monte Carlo studies were completed to understand the mechanism's capture capability, determine subsystem requirements, and evolve the design for improved performance.",
author = "Daniel Rivera and Pejmun Motaghedi and Anthony Hays",
year = "2005",
doi = "10.1117/12.606227",
language = "English (US)",
volume = "5799",
pages = "82--91",
editor = "P. Motaghedi",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Modeling and simulation of the Michigan aerospace autonomous satellite docking system II

AU - Rivera, Daniel

AU - Motaghedi, Pejmun

AU - Hays, Anthony

PY - 2005

Y1 - 2005

N2 - The scope of the analysis was to determine the capability of the Michigan Aerospace Corporation (MAC) Autonomous Docking Satellite System II (referred to as ' ASDS' for the remainder of this paper), and to develop and mature the I concept. The integrated system model included detailed subsystem models. A cable model was developed from the test data that resulted in good correlation. A high fidelity subsystem model of the cam resistance force was modeled. The integrated system model also includes contact definitions, final latching/locking definition, and various sensors. Over 3,000 cases were analyzed to identify areas where the MAC docking concept can be improved. Sensitivity and Monte Carlo studies were completed to understand the mechanism's capture capability, determine subsystem requirements, and evolve the design for improved performance.

AB - The scope of the analysis was to determine the capability of the Michigan Aerospace Corporation (MAC) Autonomous Docking Satellite System II (referred to as ' ASDS' for the remainder of this paper), and to develop and mature the I concept. The integrated system model included detailed subsystem models. A cable model was developed from the test data that resulted in good correlation. A high fidelity subsystem model of the cam resistance force was modeled. The integrated system model also includes contact definitions, final latching/locking definition, and various sensors. Over 3,000 cases were analyzed to identify areas where the MAC docking concept can be improved. Sensitivity and Monte Carlo studies were completed to understand the mechanism's capture capability, determine subsystem requirements, and evolve the design for improved performance.

UR - http://www.scopus.com/inward/record.url?scp=27544514973&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27544514973&partnerID=8YFLogxK

U2 - 10.1117/12.606227

DO - 10.1117/12.606227

M3 - Conference contribution

AN - SCOPUS:27544514973

VL - 5799

SP - 82

EP - 91

BT - Proceedings of SPIE - The International Society for Optical Engineering

A2 - Motaghedi, P.

ER -