METHOD TO ANALYZE VOLTAGE RESONANCE IN POWER SYSTEMS.

L. A. Kraft, G. T. Heydt

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

While the appearance of nonlinear devices as loads in electric power systems is not a new phenomenon, this sector of the total demand is significantly increasing and has reached substantial levels in many areas. Experience has shown that the configuration of the power system to which these devices are attached can be such as to cause a resonance condition to develop. This paper proposes a method to readily evaluate a system configuration so that an evaluation of possible problems due to harmonic voltage resonance can be made. This paper also offers a method of determining the harmonic voltage magnitudes which can develop at any bus in the system due to the voltage resonance. This method will produce results with enough accuracy to reduce the need to run multiple Newton-Raphson power flow studies which have been modified to permit the inclusion of harmonic voltages and currents.

Original languageEnglish (US)
Pages (from-to)1033-1037
Number of pages5
JournalIEEE Transactions on Power Apparatus and Systems
VolumePAS-103
Issue number5
StatePublished - May 1984
Externally publishedYes

Fingerprint

Electric potential
Electric power systems

ASJC Scopus subject areas

  • Engineering(all)

Cite this

METHOD TO ANALYZE VOLTAGE RESONANCE IN POWER SYSTEMS. / Kraft, L. A.; Heydt, G. T.

In: IEEE Transactions on Power Apparatus and Systems, Vol. PAS-103, No. 5, 05.1984, p. 1033-1037.

Research output: Contribution to journalArticle

@article{8bd042879999487fb10ea5b2b2cd2021,
title = "METHOD TO ANALYZE VOLTAGE RESONANCE IN POWER SYSTEMS.",
abstract = "While the appearance of nonlinear devices as loads in electric power systems is not a new phenomenon, this sector of the total demand is significantly increasing and has reached substantial levels in many areas. Experience has shown that the configuration of the power system to which these devices are attached can be such as to cause a resonance condition to develop. This paper proposes a method to readily evaluate a system configuration so that an evaluation of possible problems due to harmonic voltage resonance can be made. This paper also offers a method of determining the harmonic voltage magnitudes which can develop at any bus in the system due to the voltage resonance. This method will produce results with enough accuracy to reduce the need to run multiple Newton-Raphson power flow studies which have been modified to permit the inclusion of harmonic voltages and currents.",
author = "Kraft, {L. A.} and Heydt, {G. T.}",
year = "1984",
month = "5",
language = "English (US)",
volume = "PAS-103",
pages = "1033--1037",
journal = "IEEE Transactions on Power Apparatus and Systems",
issn = "0018-9510",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "5",

}

TY - JOUR

T1 - METHOD TO ANALYZE VOLTAGE RESONANCE IN POWER SYSTEMS.

AU - Kraft, L. A.

AU - Heydt, G. T.

PY - 1984/5

Y1 - 1984/5

N2 - While the appearance of nonlinear devices as loads in electric power systems is not a new phenomenon, this sector of the total demand is significantly increasing and has reached substantial levels in many areas. Experience has shown that the configuration of the power system to which these devices are attached can be such as to cause a resonance condition to develop. This paper proposes a method to readily evaluate a system configuration so that an evaluation of possible problems due to harmonic voltage resonance can be made. This paper also offers a method of determining the harmonic voltage magnitudes which can develop at any bus in the system due to the voltage resonance. This method will produce results with enough accuracy to reduce the need to run multiple Newton-Raphson power flow studies which have been modified to permit the inclusion of harmonic voltages and currents.

AB - While the appearance of nonlinear devices as loads in electric power systems is not a new phenomenon, this sector of the total demand is significantly increasing and has reached substantial levels in many areas. Experience has shown that the configuration of the power system to which these devices are attached can be such as to cause a resonance condition to develop. This paper proposes a method to readily evaluate a system configuration so that an evaluation of possible problems due to harmonic voltage resonance can be made. This paper also offers a method of determining the harmonic voltage magnitudes which can develop at any bus in the system due to the voltage resonance. This method will produce results with enough accuracy to reduce the need to run multiple Newton-Raphson power flow studies which have been modified to permit the inclusion of harmonic voltages and currents.

UR - http://www.scopus.com/inward/record.url?scp=0021425685&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0021425685&partnerID=8YFLogxK

M3 - Article

VL - PAS-103

SP - 1033

EP - 1037

JO - IEEE Transactions on Power Apparatus and Systems

JF - IEEE Transactions on Power Apparatus and Systems

SN - 0018-9510

IS - 5

ER -