Magnetic Performance of the Ssc Dipole Magnets

H. Gurol; D. W. Bliss; J. L. Elliott; L. V. Nguyen; R. E. Simon; C. E. Abel; M. P. Krefta

doi:10.1109/77.233793

Magnetic Performance of the Ssc Dipole Magnets

H. Gurol, D. W. Bliss, J. L. Elliott, L. V. Nguyen, R. E. Simon, C. E. Abel, M. P. Krefta

Research output: Contribution to journal › Letter › peer-review

1 Scopus citations

Abstract

~The purpose of this paper is to report on the status of the magnetic design of the SSC dipole magnets. A two and three dimensional design optimization was performed that includes the effects of permeable collar, yoke, cryostat, beam tube, crescent yoke end pieces, cool-down, and Lorentz loads. A field quality plan was developed that represents our approach to tuning the design for satisfying the systematic and RMS multipole specifications. Tolerances of parts, tools and processes on the expected multipole distributions are currently being investigated.

Original language	English (US)
Pages (from-to)	670-673
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	3
Issue number	1
DOIs	https://doi.org/10.1109/77.233793
State	Published - Mar 1993
Externally published	Yes

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/77.233793

Cite this

@article{5d7b8dff1890468cbbd4aef1a7564e5a,

title = "Magnetic Performance of the Ssc Dipole Magnets",

abstract = "~The purpose of this paper is to report on the status of the magnetic design of the SSC dipole magnets. A two and three dimensional design optimization was performed that includes the effects of permeable collar, yoke, cryostat, beam tube, crescent yoke end pieces, cool-down, and Lorentz loads. A field quality plan was developed that represents our approach to tuning the design for satisfying the systematic and RMS multipole specifications. Tolerances of parts, tools and processes on the expected multipole distributions are currently being investigated.",

author = "H. Gurol and Bliss, {D. W.} and Elliott, {J. L.} and Nguyen, {L. V.} and Simon, {R. E.} and Abel, {C. E.} and Krefta, {M. P.}",

note = "Funding Information: This work described herein is being accomplished under contract to the Universities Research Association in support of the Superconducting Super Collider project for the U.S. Department of Energy. Manuscript received August 24, 1992.",

year = "1993",

month = mar,

doi = "10.1109/77.233793",

language = "English (US)",

volume = "3",

pages = "670--673",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "1",

}

TY - JOUR

T1 - Magnetic Performance of the Ssc Dipole Magnets

AU - Gurol, H.

AU - Bliss, D. W.

AU - Elliott, J. L.

AU - Nguyen, L. V.

AU - Simon, R. E.

AU - Abel, C. E.

AU - Krefta, M. P.

N1 - Funding Information: This work described herein is being accomplished under contract to the Universities Research Association in support of the Superconducting Super Collider project for the U.S. Department of Energy. Manuscript received August 24, 1992.

PY - 1993/3

Y1 - 1993/3

N2 - ~The purpose of this paper is to report on the status of the magnetic design of the SSC dipole magnets. A two and three dimensional design optimization was performed that includes the effects of permeable collar, yoke, cryostat, beam tube, crescent yoke end pieces, cool-down, and Lorentz loads. A field quality plan was developed that represents our approach to tuning the design for satisfying the systematic and RMS multipole specifications. Tolerances of parts, tools and processes on the expected multipole distributions are currently being investigated.

AB - ~The purpose of this paper is to report on the status of the magnetic design of the SSC dipole magnets. A two and three dimensional design optimization was performed that includes the effects of permeable collar, yoke, cryostat, beam tube, crescent yoke end pieces, cool-down, and Lorentz loads. A field quality plan was developed that represents our approach to tuning the design for satisfying the systematic and RMS multipole specifications. Tolerances of parts, tools and processes on the expected multipole distributions are currently being investigated.

UR - http://www.scopus.com/inward/record.url?scp=0027554263&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027554263&partnerID=8YFLogxK

U2 - 10.1109/77.233793

DO - 10.1109/77.233793

M3 - Letter

AN - SCOPUS:0027554263

SN - 1051-8223

VL - 3

SP - 670

EP - 673

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 1

ER -

Magnetic Performance of the Ssc Dipole Magnets

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this