Identification of mistuning characteristics of bladed disks from free response data-part 1

Marc Mignolet, A. J. Rivas-Guerra, J. P. Delor

Research output: Contribution to journalArticle

43 Scopus citations

Abstract

The focus of the present two-part investigation is on the estimation of the dynamic properties, i.e., masses, stiffnesses, natural frequencies, mode shapes and their statistical distributions, of turbomachine blades to be used in the accurate prediction of the forced response of mistuned bladed disks. As input to this process, it is assumed that the lowest natural frequencies of the blades alone have been experimentally measured, for example, in a broach block test. Since the number of measurements is always less than the number of unknowns, this problem is indeterminate in nature. In this first part of the investigation, two distinct approaches will be investigated to resolve the shortfall of data. The first one relies on the imposition of as many constraints as needed to ensure a unique solution to this identification problem. Specifically, the models shapes and modal masses of the blades are set to their design/tuned counterparts while the modal stiffnesses are varied from blade to blade to match the measured natural frequencies. The second approach, based on the maximum likelihood principle, yields estimates of all the structural parameters of the blades through the minimization of a specified "cost function." The accuracy of these two techniques in predicting the forced response of mistuned bladed disks will be assessed on simple dynamic models of the blades.

Original languageEnglish (US)
Pages (from-to)395-403
Number of pages9
JournalJournal of Engineering for Gas Turbines and Power
Volume123
Issue number2
DOIs
StatePublished - Apr 1 2001

    Fingerprint

ASJC Scopus subject areas

  • Nuclear Energy and Engineering
  • Fuel Technology
  • Aerospace Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering

Cite this