Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur

Lin Ma, Shuya Wei, Houlong Zhuang, Kenville E. Hendrickson, Richard G. Hennig, Lynden A. Archer

Research output: Contribution to journalArticle

74 Citations (Scopus)

Abstract

Great efforts have been devoted towards development of rechargeable lithium-sulfur (Li-S) battery designs that offer extended cycling. The poor electronic and ionic conductivity of sulfur and its reduction compounds with lithium, solubility of some sulfides in the most commonly used Li-S electrolyte solvents, and the volume changes that accompany lithiation and delithiation processes in a sulfur cathode, pose significant challenges that have so far impeded commercialization of rechargeable Li-S batteries. We demonstrate that TiS2, which uses an intercalation chemistry and is known for its high rate capability and stable performance as a lithium battery cathode, and sulfur, which has very high capacity (1675 mA h g-1) when coupled in a conversion-based electrochemical reaction with lithium metal, can be combined to produce hybrid cathodes in which the two materials function synergistically in the same electrolyte and within the same working voltage. We further show that co-generation of interconnected S8/TiS2 hybrid foams through thermal reaction of Ti precursor foams and S8 yields 3D hybrid cathode structures in which sulfur is infused into porous TiS2 foams. In galvanostatic electrochemical cycling studies the hybrid cathodes demonstrate high areal specific capacity (9 mA h cm-2) and high retention ratios, even at a relatively large areal mass loading of ∼40 mg sulfur per cm2 and high current density (10 mA cm-2). We attribute the improved performance of the materials to the synergistic effect in which TiS2 not only improves the conductivity and rate capability of the cathode, but exerts a strong affinity for soluble lithium polysulfides, which limit their loss to the electrolyte.

Original languageEnglish (US)
Pages (from-to)19857-19866
Number of pages10
JournalJournal of Materials Chemistry A
Volume3
Issue number39
DOIs
StatePublished - Aug 26 2015
Externally publishedYes

Fingerprint

Lithium batteries
Sulfur
Cathodes
Lithium
Electrolytes
Foams
Polysulfides
Sulfides
Ionic conductivity
Intercalation
Current density
Solubility
Metals
Electric potential

ASJC Scopus subject areas

  • Chemistry(all)
  • Renewable Energy, Sustainability and the Environment
  • Materials Science(all)

Cite this

Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur. / Ma, Lin; Wei, Shuya; Zhuang, Houlong; Hendrickson, Kenville E.; Hennig, Richard G.; Archer, Lynden A.

In: Journal of Materials Chemistry A, Vol. 3, No. 39, 26.08.2015, p. 19857-19866.

Research output: Contribution to journalArticle

Ma, Lin ; Wei, Shuya ; Zhuang, Houlong ; Hendrickson, Kenville E. ; Hennig, Richard G. ; Archer, Lynden A. / Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur. In: Journal of Materials Chemistry A. 2015 ; Vol. 3, No. 39. pp. 19857-19866.
@article{f4ee9ea056dc421398dbcf247067abc7,
title = "Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur",
abstract = "Great efforts have been devoted towards development of rechargeable lithium-sulfur (Li-S) battery designs that offer extended cycling. The poor electronic and ionic conductivity of sulfur and its reduction compounds with lithium, solubility of some sulfides in the most commonly used Li-S electrolyte solvents, and the volume changes that accompany lithiation and delithiation processes in a sulfur cathode, pose significant challenges that have so far impeded commercialization of rechargeable Li-S batteries. We demonstrate that TiS2, which uses an intercalation chemistry and is known for its high rate capability and stable performance as a lithium battery cathode, and sulfur, which has very high capacity (1675 mA h g-1) when coupled in a conversion-based electrochemical reaction with lithium metal, can be combined to produce hybrid cathodes in which the two materials function synergistically in the same electrolyte and within the same working voltage. We further show that co-generation of interconnected S8/TiS2 hybrid foams through thermal reaction of Ti precursor foams and S8 yields 3D hybrid cathode structures in which sulfur is infused into porous TiS2 foams. In galvanostatic electrochemical cycling studies the hybrid cathodes demonstrate high areal specific capacity (9 mA h cm-2) and high retention ratios, even at a relatively large areal mass loading of ∼40 mg sulfur per cm2 and high current density (10 mA cm-2). We attribute the improved performance of the materials to the synergistic effect in which TiS2 not only improves the conductivity and rate capability of the cathode, but exerts a strong affinity for soluble lithium polysulfides, which limit their loss to the electrolyte.",
author = "Lin Ma and Shuya Wei and Houlong Zhuang and Hendrickson, {Kenville E.} and Hennig, {Richard G.} and Archer, {Lynden A.}",
year = "2015",
month = "8",
day = "26",
doi = "10.1039/c5ta06348e",
language = "English (US)",
volume = "3",
pages = "19857--19866",
journal = "Journal of Materials Chemistry A",
issn = "2050-7488",
publisher = "Royal Society of Chemistry",
number = "39",

}

TY - JOUR

T1 - Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur

AU - Ma, Lin

AU - Wei, Shuya

AU - Zhuang, Houlong

AU - Hendrickson, Kenville E.

AU - Hennig, Richard G.

AU - Archer, Lynden A.

PY - 2015/8/26

Y1 - 2015/8/26

N2 - Great efforts have been devoted towards development of rechargeable lithium-sulfur (Li-S) battery designs that offer extended cycling. The poor electronic and ionic conductivity of sulfur and its reduction compounds with lithium, solubility of some sulfides in the most commonly used Li-S electrolyte solvents, and the volume changes that accompany lithiation and delithiation processes in a sulfur cathode, pose significant challenges that have so far impeded commercialization of rechargeable Li-S batteries. We demonstrate that TiS2, which uses an intercalation chemistry and is known for its high rate capability and stable performance as a lithium battery cathode, and sulfur, which has very high capacity (1675 mA h g-1) when coupled in a conversion-based electrochemical reaction with lithium metal, can be combined to produce hybrid cathodes in which the two materials function synergistically in the same electrolyte and within the same working voltage. We further show that co-generation of interconnected S8/TiS2 hybrid foams through thermal reaction of Ti precursor foams and S8 yields 3D hybrid cathode structures in which sulfur is infused into porous TiS2 foams. In galvanostatic electrochemical cycling studies the hybrid cathodes demonstrate high areal specific capacity (9 mA h cm-2) and high retention ratios, even at a relatively large areal mass loading of ∼40 mg sulfur per cm2 and high current density (10 mA cm-2). We attribute the improved performance of the materials to the synergistic effect in which TiS2 not only improves the conductivity and rate capability of the cathode, but exerts a strong affinity for soluble lithium polysulfides, which limit their loss to the electrolyte.

AB - Great efforts have been devoted towards development of rechargeable lithium-sulfur (Li-S) battery designs that offer extended cycling. The poor electronic and ionic conductivity of sulfur and its reduction compounds with lithium, solubility of some sulfides in the most commonly used Li-S electrolyte solvents, and the volume changes that accompany lithiation and delithiation processes in a sulfur cathode, pose significant challenges that have so far impeded commercialization of rechargeable Li-S batteries. We demonstrate that TiS2, which uses an intercalation chemistry and is known for its high rate capability and stable performance as a lithium battery cathode, and sulfur, which has very high capacity (1675 mA h g-1) when coupled in a conversion-based electrochemical reaction with lithium metal, can be combined to produce hybrid cathodes in which the two materials function synergistically in the same electrolyte and within the same working voltage. We further show that co-generation of interconnected S8/TiS2 hybrid foams through thermal reaction of Ti precursor foams and S8 yields 3D hybrid cathode structures in which sulfur is infused into porous TiS2 foams. In galvanostatic electrochemical cycling studies the hybrid cathodes demonstrate high areal specific capacity (9 mA h cm-2) and high retention ratios, even at a relatively large areal mass loading of ∼40 mg sulfur per cm2 and high current density (10 mA cm-2). We attribute the improved performance of the materials to the synergistic effect in which TiS2 not only improves the conductivity and rate capability of the cathode, but exerts a strong affinity for soluble lithium polysulfides, which limit their loss to the electrolyte.

UR - http://www.scopus.com/inward/record.url?scp=84942891943&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84942891943&partnerID=8YFLogxK

U2 - 10.1039/c5ta06348e

DO - 10.1039/c5ta06348e

M3 - Article

AN - SCOPUS:84942891943

VL - 3

SP - 19857

EP - 19866

JO - Journal of Materials Chemistry A

JF - Journal of Materials Chemistry A

SN - 2050-7488

IS - 39

ER -