1 Citation (Scopus)

Abstract

Dynamic tensile tests were conducted using a high speed servo-hydraulic testing machine on three types of fabric reinforced cement composites. A good correlation was found between the properties of the fabrics and the composites in high speed tensile tests. The carbon composite exhibits the highest strength, followed by the AR-glass composite and then PE composite in high speed tensile tests. The cracking evolution and patterns of the composites were recorded by a high speed digital camera at a sampling rate of 10000 fps. Images showed that multiple cracking behavior was predominant for the carbon and glass fabric-cement composites, indicating good stress transfer within these systems. However, for the carbon, only the filaments at the bundle perimeter were bonded to the cement matrix as the inner filaments completely pulled out during loading. No multiple cracking was observed with PE fabric-cement composite as a single major crack was detected. This major crack opened and widened until the fabric was completely broken.

Original languageEnglish (US)
Title of host publicationSociety for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010
Pages2462-2468
Number of pages7
Volume3
StatePublished - 2010
EventSEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 - Indianapolis, IN, United States
Duration: Jun 7 2010Jun 10 2010

Other

OtherSEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010
CountryUnited States
CityIndianapolis, IN
Period6/7/106/10/10

Fingerprint

Tensile testing
Cements
Imaging techniques
Composite materials
Carbon
Cracks
Glass
High speed cameras
Digital cameras
Hydraulics
Sampling
Testing

Keywords

  • Dynamic tensile testing
  • Fabric-cement composites
  • High speed imaging

ASJC Scopus subject areas

  • Mechanics of Materials

Cite this

Zhu, D., Peled, A., & Mobasher, B. (2010). High speed imaging in dynamic tensile testing of fabric-cement composites. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 (Vol. 3, pp. 2462-2468)

High speed imaging in dynamic tensile testing of fabric-cement composites. / Zhu, Deju; Peled, Alva; Mobasher, Barzin.

Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. Vol. 3 2010. p. 2462-2468.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhu, D, Peled, A & Mobasher, B 2010, High speed imaging in dynamic tensile testing of fabric-cement composites. in Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. vol. 3, pp. 2462-2468, SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010, Indianapolis, IN, United States, 6/7/10.
Zhu D, Peled A, Mobasher B. High speed imaging in dynamic tensile testing of fabric-cement composites. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. Vol. 3. 2010. p. 2462-2468
Zhu, Deju ; Peled, Alva ; Mobasher, Barzin. / High speed imaging in dynamic tensile testing of fabric-cement composites. Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. Vol. 3 2010. pp. 2462-2468
@inproceedings{af61ace28c62473ebd20b4cca8bd3e26,
title = "High speed imaging in dynamic tensile testing of fabric-cement composites",
abstract = "Dynamic tensile tests were conducted using a high speed servo-hydraulic testing machine on three types of fabric reinforced cement composites. A good correlation was found between the properties of the fabrics and the composites in high speed tensile tests. The carbon composite exhibits the highest strength, followed by the AR-glass composite and then PE composite in high speed tensile tests. The cracking evolution and patterns of the composites were recorded by a high speed digital camera at a sampling rate of 10000 fps. Images showed that multiple cracking behavior was predominant for the carbon and glass fabric-cement composites, indicating good stress transfer within these systems. However, for the carbon, only the filaments at the bundle perimeter were bonded to the cement matrix as the inner filaments completely pulled out during loading. No multiple cracking was observed with PE fabric-cement composite as a single major crack was detected. This major crack opened and widened until the fabric was completely broken.",
keywords = "Dynamic tensile testing, Fabric-cement composites, High speed imaging",
author = "Deju Zhu and Alva Peled and Barzin Mobasher",
year = "2010",
language = "English (US)",
isbn = "9781617386909",
volume = "3",
pages = "2462--2468",
booktitle = "Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010",

}

TY - GEN

T1 - High speed imaging in dynamic tensile testing of fabric-cement composites

AU - Zhu, Deju

AU - Peled, Alva

AU - Mobasher, Barzin

PY - 2010

Y1 - 2010

N2 - Dynamic tensile tests were conducted using a high speed servo-hydraulic testing machine on three types of fabric reinforced cement composites. A good correlation was found between the properties of the fabrics and the composites in high speed tensile tests. The carbon composite exhibits the highest strength, followed by the AR-glass composite and then PE composite in high speed tensile tests. The cracking evolution and patterns of the composites were recorded by a high speed digital camera at a sampling rate of 10000 fps. Images showed that multiple cracking behavior was predominant for the carbon and glass fabric-cement composites, indicating good stress transfer within these systems. However, for the carbon, only the filaments at the bundle perimeter were bonded to the cement matrix as the inner filaments completely pulled out during loading. No multiple cracking was observed with PE fabric-cement composite as a single major crack was detected. This major crack opened and widened until the fabric was completely broken.

AB - Dynamic tensile tests were conducted using a high speed servo-hydraulic testing machine on three types of fabric reinforced cement composites. A good correlation was found between the properties of the fabrics and the composites in high speed tensile tests. The carbon composite exhibits the highest strength, followed by the AR-glass composite and then PE composite in high speed tensile tests. The cracking evolution and patterns of the composites were recorded by a high speed digital camera at a sampling rate of 10000 fps. Images showed that multiple cracking behavior was predominant for the carbon and glass fabric-cement composites, indicating good stress transfer within these systems. However, for the carbon, only the filaments at the bundle perimeter were bonded to the cement matrix as the inner filaments completely pulled out during loading. No multiple cracking was observed with PE fabric-cement composite as a single major crack was detected. This major crack opened and widened until the fabric was completely broken.

KW - Dynamic tensile testing

KW - Fabric-cement composites

KW - High speed imaging

UR - http://www.scopus.com/inward/record.url?scp=78049426901&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78049426901&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:78049426901

SN - 9781617386909

VL - 3

SP - 2462

EP - 2468

BT - Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010

ER -