Experimental study and modeling of single yarn pull-out behavior of kevlar® 49 fabric

Deju Zhu, Chote Soranakom, Barzin Mobasher, Subramaniam Rajan

Research output: Contribution to journalArticle

59 Scopus citations

Abstract

Single yarn pull-out behavior of Kevlar® 49 fabric with varying lengths and pre-applied transverse tensile forces is studied. Results indicate that both peak pull-out force and energy needed to pull an individual yarn increase with specimen length and transverse pre-load. An analytical model is used to investigate the frictional shear properties diagram between the orthogonal warp and fill yarns. Maximum static and dynamic frictional shear strength of contact interfaces of warp and fill yarns are obtained by fitting the experimental data. The periodic nature of the post-peak behavior of pull-out response is simulated by representing the contact area as a sinusoidal function with a constant period. Finally, a three-dimensional finite element model is used to simulate the single yarn pull-out behavior and the results show that pull-out force is significantly influenced by the friction between yarns and transverse pre-load.

Original languageEnglish (US)
Pages (from-to)868-879
Number of pages12
JournalComposites Part A: Applied Science and Manufacturing
Volume42
Issue number7
DOIs
Publication statusPublished - Jul 2011

    Fingerprint

Keywords

  • A. Yarn
  • C. Analytical modelling
  • C. Finite element analysis (FEA)
  • D. Mechanical testing

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials

Cite this