Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

Mohammadreza Mahmoudi; Chao Wang; Salvador Moreno; Scott R. Burlison; Diana Alatalo; Fatemeh Hassanipour; Samantha E. Smith; Mohammad Naraghi; Majid Minary-Jolandan

doi:10.1021/acsami.0c13983

Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

Mohammadreza Mahmoudi, Chao Wang, Salvador Moreno, Scott R. Burlison, Diana Alatalo, Fatemeh Hassanipour, Samantha E. Smith, Mohammad Naraghi, Majid Minary-Jolandan

Research output: Contribution to journal › Comment/debate › peer-review

Abstract

Due to a production error in converting the Information, Figure S4 appears incorrectly. The Supporting corrected version is available with this correction. The change does not affect the scientific conclusions of the paper.

Original language	English (US)
Pages (from-to)	43339
Number of pages	1
Journal	ACS Applied Materials and Interfaces
Volume	12
Issue number	38
DOIs	https://doi.org/10.1021/acsami.0c13983
State	Published - Sep 23 2020
Externally published	Yes

ASJC Scopus subject areas

General Materials Science

Access to Document

10.1021/acsami.0c13983

Cite this

Mahmoudi, M., Wang, C., Moreno, S., Burlison, S. R., Alatalo, D., Hassanipour, F., Smith, S. E., Naraghi, M., & Minary-Jolandan, M. (2020). Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260). ACS Applied Materials and Interfaces, 12(38), 43339. https://doi.org/10.1021/acsami.0c13983

Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260). / Mahmoudi, Mohammadreza; Wang, Chao; Moreno, Salvador et al.
In: ACS Applied Materials and Interfaces, Vol. 12, No. 38, 23.09.2020, p. 43339.

Research output: Contribution to journal › Comment/debate › peer-review

Mahmoudi, M, Wang, C, Moreno, S, Burlison, SR, Alatalo, D, Hassanipour, F, Smith, SE, Naraghi, M & Minary-Jolandan, M 2020, 'Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)', ACS Applied Materials and Interfaces, vol. 12, no. 38, pp. 43339. https://doi.org/10.1021/acsami.0c13983

@article{b4aa4039dc984d219434cc78b036d527,

title = "Erratum: Three-dimensional printing of ceramics through {"}carving{"} a gel and {"}filling in{"} the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)",

abstract = "Due to a production error in converting the Information, Figure S4 appears incorrectly. The Supporting corrected version is available with this correction. The change does not affect the scientific conclusions of the paper.",

author = "Mohammadreza Mahmoudi and Chao Wang and Salvador Moreno and Burlison, {Scott R.} and Diana Alatalo and Fatemeh Hassanipour and Smith, {Samantha E.} and Mohammad Naraghi and Majid Minary-Jolandan",

note = "Publisher Copyright: {\textcopyright} 2020 American Chemical Society.",

year = "2020",

month = sep,

day = "23",

doi = "10.1021/acsami.0c13983",

language = "English (US)",

volume = "12",

pages = "43339",

journal = "ACS Applied Materials and Interfaces",

issn = "1944-8244",

publisher = "American Chemical Society",

number = "38",

}

TY - JOUR

T1 - Erratum

T2 - Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

AU - Mahmoudi, Mohammadreza

AU - Wang, Chao

AU - Moreno, Salvador

AU - Burlison, Scott R.

AU - Alatalo, Diana

AU - Hassanipour, Fatemeh

AU - Smith, Samantha E.

AU - Naraghi, Mohammad

AU - Minary-Jolandan, Majid

PY - 2020/9/23

Y1 - 2020/9/23

N2 - Due to a production error in converting the Information, Figure S4 appears incorrectly. The Supporting corrected version is available with this correction. The change does not affect the scientific conclusions of the paper.

AB - Due to a production error in converting the Information, Figure S4 appears incorrectly. The Supporting corrected version is available with this correction. The change does not affect the scientific conclusions of the paper.

UR - http://www.scopus.com/inward/record.url?scp=85091557989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85091557989&partnerID=8YFLogxK

U2 - 10.1021/acsami.0c13983

DO - 10.1021/acsami.0c13983

M3 - Comment/debate

C2 - 32902253

AN - SCOPUS:85091557989

SN - 1944-8244

VL - 12

SP - 43339

JO - ACS Applied Materials and Interfaces

JF - ACS Applied Materials and Interfaces

IS - 38

ER -

Erratum: Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer (ACS Applied Materials & Interfaces (2020) 12:28 (31984-31991) DOI:10.1021/acsami.0c08260)

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this