Abstract

Accurately quantifying the microstructure of a heterogeneous material is crucial to establishing quantitative structure-property relations for material optimization and design. There is a preponderance of previous work focused on structural quantification based on 2D images and reconstructed 3D volumes obtained via different imaging techniques. Here, we introduce novel procedures that allow one to extract key structural information in the form of spatial correlation functions from limited x-ray tomography data. In the case where only a very small number of x-ray tomographic radiographs (projections) are available, we derive a formalism based on the Fourier slice theorem to compute angularly averaged correlation functions directly from the radiographs. When a larger number of projections are available, we develop a procedure to extract full vector-based correlation functions. The key component of this procedure is the computation of a “probability map,” which provides the probability of an arbitrary point in the material system belonging to a specific phase, via inverse superposition of the scaled attenuation intensities available in the tomography projections. The correlation functions of interest are then computed based on their corresponding probability interpretations from the probability map. The utilities of both of our procedures are demonstrated by obtaining lower-order correlation functions (including both the standard two-point correlation functions and non-standard surface functions) for a tin-clay composite material from both parallel-beam (synchrotron) and cone-beam (lab-scale) x-ray tomography projection data sets. Our procedure directly transforms the key morphological information contained in limited x-ray tomography projections to a more efficient, understandable, and usable form.

Original languageEnglish (US)
Pages (from-to)265-274
Number of pages10
JournalMaterials Characterization
Volume140
DOIs
StatePublished - Jun 1 2018

Fingerprint

Tomography
tomography
X rays
projection
x rays
Tin
imaging techniques
clays
Synchrotrons
tin
cones
synchrotrons
theorems
attenuation
Cones
Clay
formalism
microstructure
optimization
composite materials

Keywords

  • Correlation functions
  • Fourier slice theorem
  • Limited x-ray tomography data
  • Microstructural quantification
  • Probability map

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Direct extraction of spatial correlation functions from limited x-ray tomography data for microstructural quantification. / Li, Hechao; Singh, Somya; Chawla, Nikhilesh; Jiao, Yang.

In: Materials Characterization, Vol. 140, 01.06.2018, p. 265-274.

Research output: Contribution to journalArticle

@article{daa2e331397e4bcca39498aa9f9fe201,
title = "Direct extraction of spatial correlation functions from limited x-ray tomography data for microstructural quantification",
abstract = "Accurately quantifying the microstructure of a heterogeneous material is crucial to establishing quantitative structure-property relations for material optimization and design. There is a preponderance of previous work focused on structural quantification based on 2D images and reconstructed 3D volumes obtained via different imaging techniques. Here, we introduce novel procedures that allow one to extract key structural information in the form of spatial correlation functions from limited x-ray tomography data. In the case where only a very small number of x-ray tomographic radiographs (projections) are available, we derive a formalism based on the Fourier slice theorem to compute angularly averaged correlation functions directly from the radiographs. When a larger number of projections are available, we develop a procedure to extract full vector-based correlation functions. The key component of this procedure is the computation of a “probability map,” which provides the probability of an arbitrary point in the material system belonging to a specific phase, via inverse superposition of the scaled attenuation intensities available in the tomography projections. The correlation functions of interest are then computed based on their corresponding probability interpretations from the probability map. The utilities of both of our procedures are demonstrated by obtaining lower-order correlation functions (including both the standard two-point correlation functions and non-standard surface functions) for a tin-clay composite material from both parallel-beam (synchrotron) and cone-beam (lab-scale) x-ray tomography projection data sets. Our procedure directly transforms the key morphological information contained in limited x-ray tomography projections to a more efficient, understandable, and usable form.",
keywords = "Correlation functions, Fourier slice theorem, Limited x-ray tomography data, Microstructural quantification, Probability map",
author = "Hechao Li and Somya Singh and Nikhilesh Chawla and Yang Jiao",
year = "2018",
month = "6",
day = "1",
doi = "10.1016/j.matchar.2018.04.020",
language = "English (US)",
volume = "140",
pages = "265--274",
journal = "Materials Characterization",
issn = "1044-5803",
publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Direct extraction of spatial correlation functions from limited x-ray tomography data for microstructural quantification

AU - Li, Hechao

AU - Singh, Somya

AU - Chawla, Nikhilesh

AU - Jiao, Yang

PY - 2018/6/1

Y1 - 2018/6/1

N2 - Accurately quantifying the microstructure of a heterogeneous material is crucial to establishing quantitative structure-property relations for material optimization and design. There is a preponderance of previous work focused on structural quantification based on 2D images and reconstructed 3D volumes obtained via different imaging techniques. Here, we introduce novel procedures that allow one to extract key structural information in the form of spatial correlation functions from limited x-ray tomography data. In the case where only a very small number of x-ray tomographic radiographs (projections) are available, we derive a formalism based on the Fourier slice theorem to compute angularly averaged correlation functions directly from the radiographs. When a larger number of projections are available, we develop a procedure to extract full vector-based correlation functions. The key component of this procedure is the computation of a “probability map,” which provides the probability of an arbitrary point in the material system belonging to a specific phase, via inverse superposition of the scaled attenuation intensities available in the tomography projections. The correlation functions of interest are then computed based on their corresponding probability interpretations from the probability map. The utilities of both of our procedures are demonstrated by obtaining lower-order correlation functions (including both the standard two-point correlation functions and non-standard surface functions) for a tin-clay composite material from both parallel-beam (synchrotron) and cone-beam (lab-scale) x-ray tomography projection data sets. Our procedure directly transforms the key morphological information contained in limited x-ray tomography projections to a more efficient, understandable, and usable form.

AB - Accurately quantifying the microstructure of a heterogeneous material is crucial to establishing quantitative structure-property relations for material optimization and design. There is a preponderance of previous work focused on structural quantification based on 2D images and reconstructed 3D volumes obtained via different imaging techniques. Here, we introduce novel procedures that allow one to extract key structural information in the form of spatial correlation functions from limited x-ray tomography data. In the case where only a very small number of x-ray tomographic radiographs (projections) are available, we derive a formalism based on the Fourier slice theorem to compute angularly averaged correlation functions directly from the radiographs. When a larger number of projections are available, we develop a procedure to extract full vector-based correlation functions. The key component of this procedure is the computation of a “probability map,” which provides the probability of an arbitrary point in the material system belonging to a specific phase, via inverse superposition of the scaled attenuation intensities available in the tomography projections. The correlation functions of interest are then computed based on their corresponding probability interpretations from the probability map. The utilities of both of our procedures are demonstrated by obtaining lower-order correlation functions (including both the standard two-point correlation functions and non-standard surface functions) for a tin-clay composite material from both parallel-beam (synchrotron) and cone-beam (lab-scale) x-ray tomography projection data sets. Our procedure directly transforms the key morphological information contained in limited x-ray tomography projections to a more efficient, understandable, and usable form.

KW - Correlation functions

KW - Fourier slice theorem

KW - Limited x-ray tomography data

KW - Microstructural quantification

KW - Probability map

UR - http://www.scopus.com/inward/record.url?scp=85045651055&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85045651055&partnerID=8YFLogxK

U2 - 10.1016/j.matchar.2018.04.020

DO - 10.1016/j.matchar.2018.04.020

M3 - Article

AN - SCOPUS:85045651055

VL - 140

SP - 265

EP - 274

JO - Materials Characterization

JF - Materials Characterization

SN - 1044-5803

ER -