Density of Charon formed from a disk generated by the impact of partially differentiated bodies

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

Formation of Pluto's moon Charon from an impact-generated circumplanetary disk has been considered unlikely because of its composition. Such a disk is created by the collision of two similarly sized, differentiated impactors; the disk would contain material from the impactors' outer portions; and that material has been presumed to be pure water ice. Charon has been predicted to have a density ~1000kgm<sup>-3</sup> if formed from a disk, much lower than its observed density ≈1630kgm<sup>-3</sup>. Here we reconsider the composition of the circumplanetary disk. We draw on previously presented models to calculate the thermal evolution and internal structure of the impactors, each assumed to have radii ≈972km and mean densities ≈2000kgm<sup>-3</sup>. We show such bodies retain crusts of rock and ice on their surfaces about 46km thick, comprising about 13% of the impactors' mass; the outer layers are not pure ice. Provided ≈6% of the total mass of the impactors escapes the system, an escape fraction supported by numerical simulations, the observed densities of Pluto and Charon are reproduced in a scenario involving a circumplanetary disk. Charon's density does not rule out an origin from an impact-generated disk. We calculate the thermal evolution of Charon if it formed late from an impact-generated disk. While Charon is less heated by radioactive decay than if it formed earlier, the heat of its accretion causes its complete differentiation. Subsurface liquid and cryovolcanism may have existed on Charon, but only until 1.5Gyr ago. These predictions may be tested by data returned by the New Horizons mission.

Original languageEnglish (US)
Pages (from-to)37-47
Number of pages11
JournalIcarus
Volume246
Issue numberC
DOIs
StatePublished - 2015

Fingerprint

Charon
impactors
Pluto
thermal evolution
ice
Pluto (planet)
radioactive decay
escape systems
New Horizons mission
Moon
collision
accretion
impactor
crust
natural satellites
liquid
escape
crusts
prediction
rock

Keywords

  • Charon
  • Pluto
  • Pluto, satellites
  • Satellites, formation
  • Thermal histories

ASJC Scopus subject areas

  • Space and Planetary Science
  • Astronomy and Astrophysics

Cite this

Density of Charon formed from a disk generated by the impact of partially differentiated bodies. / Desch, Steven.

In: Icarus, Vol. 246, No. C, 2015, p. 37-47.

Research output: Contribution to journalArticle

@article{3ca698c1e74c478f98bde2daa58aa134,
title = "Density of Charon formed from a disk generated by the impact of partially differentiated bodies",
abstract = "Formation of Pluto's moon Charon from an impact-generated circumplanetary disk has been considered unlikely because of its composition. Such a disk is created by the collision of two similarly sized, differentiated impactors; the disk would contain material from the impactors' outer portions; and that material has been presumed to be pure water ice. Charon has been predicted to have a density ~1000kgm-3 if formed from a disk, much lower than its observed density ≈1630kgm-3. Here we reconsider the composition of the circumplanetary disk. We draw on previously presented models to calculate the thermal evolution and internal structure of the impactors, each assumed to have radii ≈972km and mean densities ≈2000kgm-3. We show such bodies retain crusts of rock and ice on their surfaces about 46km thick, comprising about 13{\%} of the impactors' mass; the outer layers are not pure ice. Provided ≈6{\%} of the total mass of the impactors escapes the system, an escape fraction supported by numerical simulations, the observed densities of Pluto and Charon are reproduced in a scenario involving a circumplanetary disk. Charon's density does not rule out an origin from an impact-generated disk. We calculate the thermal evolution of Charon if it formed late from an impact-generated disk. While Charon is less heated by radioactive decay than if it formed earlier, the heat of its accretion causes its complete differentiation. Subsurface liquid and cryovolcanism may have existed on Charon, but only until 1.5Gyr ago. These predictions may be tested by data returned by the New Horizons mission.",
keywords = "Charon, Pluto, Pluto, satellites, Satellites, formation, Thermal histories",
author = "Steven Desch",
year = "2015",
doi = "10.1016/j.icarus.2014.07.034",
language = "English (US)",
volume = "246",
pages = "37--47",
journal = "Icarus",
issn = "0019-1035",
publisher = "Academic Press Inc.",
number = "C",

}

TY - JOUR

T1 - Density of Charon formed from a disk generated by the impact of partially differentiated bodies

AU - Desch, Steven

PY - 2015

Y1 - 2015

N2 - Formation of Pluto's moon Charon from an impact-generated circumplanetary disk has been considered unlikely because of its composition. Such a disk is created by the collision of two similarly sized, differentiated impactors; the disk would contain material from the impactors' outer portions; and that material has been presumed to be pure water ice. Charon has been predicted to have a density ~1000kgm-3 if formed from a disk, much lower than its observed density ≈1630kgm-3. Here we reconsider the composition of the circumplanetary disk. We draw on previously presented models to calculate the thermal evolution and internal structure of the impactors, each assumed to have radii ≈972km and mean densities ≈2000kgm-3. We show such bodies retain crusts of rock and ice on their surfaces about 46km thick, comprising about 13% of the impactors' mass; the outer layers are not pure ice. Provided ≈6% of the total mass of the impactors escapes the system, an escape fraction supported by numerical simulations, the observed densities of Pluto and Charon are reproduced in a scenario involving a circumplanetary disk. Charon's density does not rule out an origin from an impact-generated disk. We calculate the thermal evolution of Charon if it formed late from an impact-generated disk. While Charon is less heated by radioactive decay than if it formed earlier, the heat of its accretion causes its complete differentiation. Subsurface liquid and cryovolcanism may have existed on Charon, but only until 1.5Gyr ago. These predictions may be tested by data returned by the New Horizons mission.

AB - Formation of Pluto's moon Charon from an impact-generated circumplanetary disk has been considered unlikely because of its composition. Such a disk is created by the collision of two similarly sized, differentiated impactors; the disk would contain material from the impactors' outer portions; and that material has been presumed to be pure water ice. Charon has been predicted to have a density ~1000kgm-3 if formed from a disk, much lower than its observed density ≈1630kgm-3. Here we reconsider the composition of the circumplanetary disk. We draw on previously presented models to calculate the thermal evolution and internal structure of the impactors, each assumed to have radii ≈972km and mean densities ≈2000kgm-3. We show such bodies retain crusts of rock and ice on their surfaces about 46km thick, comprising about 13% of the impactors' mass; the outer layers are not pure ice. Provided ≈6% of the total mass of the impactors escapes the system, an escape fraction supported by numerical simulations, the observed densities of Pluto and Charon are reproduced in a scenario involving a circumplanetary disk. Charon's density does not rule out an origin from an impact-generated disk. We calculate the thermal evolution of Charon if it formed late from an impact-generated disk. While Charon is less heated by radioactive decay than if it formed earlier, the heat of its accretion causes its complete differentiation. Subsurface liquid and cryovolcanism may have existed on Charon, but only until 1.5Gyr ago. These predictions may be tested by data returned by the New Horizons mission.

KW - Charon

KW - Pluto

KW - Pluto, satellites

KW - Satellites, formation

KW - Thermal histories

UR - http://www.scopus.com/inward/record.url?scp=84927942483&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84927942483&partnerID=8YFLogxK

U2 - 10.1016/j.icarus.2014.07.034

DO - 10.1016/j.icarus.2014.07.034

M3 - Article

AN - SCOPUS:84927942483

VL - 246

SP - 37

EP - 47

JO - Icarus

JF - Icarus

SN - 0019-1035

IS - C

ER -