Blockage diagnostics for nuclear power plant pressure transmitter sensing lines

Kang Lin, Keith Holbert

Research output: Contribution to journalArticle

15 Scopus citations

Abstract

Blockages occur in pressure sensing lines in nuclear power plants due to solidification of boron, sludge, and accumulation of other contaminants. This paper investigates the impact of sensing line blockages on the pressure system transfer function based on an equivalent pi model. For both whole-length and localized blockage scenarios, the first resonant peak tends to shift toward a lower frequency while reducing the peak magnitude. Higher frequency resonant peaks may move to either higher or lower frequencies depending on the blockage type. The lower frequency peaks start to vanish when the impulse line cross-sectional area shrinks. Operational steam pressure noise data from a nuclear power plant are analyzed and are found to compare well to simulation results from the sensing line model. Utilization of the resonant peak frequency and peak interval deviations in the operational data power spectral density is introduced in this paper. This work can be employed to achieve predictive maintenance of sensing lines so that plant operation is not disturbed.

Original languageEnglish (US)
Pages (from-to)365-372
Number of pages8
JournalNuclear Engineering and Design
Volume239
Issue number2
DOIs
StatePublished - Feb 1 2009

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Safety, Risk, Reliability and Quality
  • Waste Management and Disposal
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Blockage diagnostics for nuclear power plant pressure transmitter sensing lines'. Together they form a unique fingerprint.

  • Cite this