Find Scholarly Works

Search results

• Article

  3D crack-like damage imaging using a novel inverse heat conduction framework

  Peng, T. & Liu, Y., Nov 1 2016, In: International Journal of Heat and Mass Transfer. 102, p. 426-434 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Heat conduction
  • conductive heat transfer
  • cracks
  • Imaging techniques
  • damage
  4 Scopus citations

• 3-D cross-point array operation on AlO_y/HfO_x-based vertical resistive switching memory

  Gao, B., Chen, B., Liu, R., Zhang, F., Huang, P., Liu, L., Liu, X., Kang, J., Chen, H. Y., Yu, S. & Wong, H. S. P., May 2014, In: IEEE Transactions on Electron Devices. 61, 5, p. 1377-1381 5 p., 6780612.

  Research output: Contribution to journal › Article › peer-review

  • Data storage equipment
  • Multilayers
  20 Scopus citations

• 3D DEM simulations of drained triaxial compression of sand strengthened using microbially induced carbonate precipitation

  Yang, P., O'Donnell, S., Hamdan, N., Kavazanjian, E. & Neithalath, N., Jun 1 2017, In: International Journal of Geomechanics. 17, 6, p. 1-12 12 p., 04016143.

  Research output: Contribution to journal › Article › peer-review

  • discrete element method
  • carbonates
  • sand
  • compression
  • carbonate
  12 Scopus citations

• 3-D excavation and measurement of recent rupture history along the Cholame segment of the San Andreas Fault

  Young, J. J., Arrowsmith, J. R., Colini, L., Grant, L. B. & Gootee, B., 2002, In: Bulletin of the Seismological Society of America: Special Issue on Paleoseismology of the San Andreas fault.

  Research output: Contribution to journal › Article › peer-review

• 3D face authentication and recognition based on bilateral symmetry analysis

  Zhang, L., Razdan, A., Farin, G., Femiani, J., Bae, M. & Lockwood, C., Jan 1 2006, In: Visual Computer. 22, 1, p. 43-55 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Authentication
  68 Scopus citations

• 3D Face Authentication and Recognition Based on Bilateral Symmetry Analysis

  Zhang, L., Razdan, A., Farin, G., Femiani, J., Bae, M. S. & Lockwood, C., Jan 2006, In: Visual Computer. 22, p. 43-55

  Research output: Contribution to journal › Article › peer-review

  68 Scopus citations

• 3D Framework DNA Origami with Layered Crossovers

  Hong, F., Jiang, S., Wang, T., Liu, Y. & Yan, H., 2016, In: Angewandte Chemie - International Edition. 55, 41, p. 12832-12835 4 p.

  Research output: Contribution to journal › Article › peer-review

  • DNA
  • Nanostructures
  • Metal-Organic Frameworks
  • Engineers
  • Scaffolds
  21 Scopus citations

• 3D GIS archaeology in South Africa

  Fisher, E., Pyne, L. & Marean, C., May 2005, In: GEO: connexion. 4, 5, p. 40-41 2 p.

  Research output: Contribution to journal › Article › peer-review

  • archaeology
  • GIS
  • archaeological site
  • analytical method
  • artifact

• 3D heterogeneous islet organoid generation from human embryonic stem cells using a novel engineered hydrogel platform

  Candiello, J., Grandhi, T. S. P., Goh, S. K., Vaidya, V., Lemmon-Kishi, M., Eliato, K. R., Ros, R., Kumta, P. N., Rege, K. & Banerjee, I., Sep 2018, In: Biomaterials. 177, p. 27-39 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Stem cells
  • Organoids
  • Hydrogels
  • Human Embryonic Stem Cells
  • Polyethylene Glycol Dimethacrylate Hydrogel
  40 Scopus citations

• 3D inverted opal hydrogel scaffolds with oxygen sensing capability

  Liu, Y. & Wang, S., Jul 1 2007, In: Colloids and Surfaces B: Biointerfaces. 58, 1, p. 8-13 6 p.

  Research output: Contribution to journal › Article › peer-review

  • tris(4,7-diphenyl-1,10-phenanthroline)ruthenium (II)
  • Hydrogels
  • Scaffolds
  • Polyethylene Glycol Dimethacrylate Hydrogel
  • Ethyl Chloride
  13 Scopus citations

• 3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation

  Singh, S. S., Schwartzstein, C., Williams, J. J., Xiao, X., De Carlo, F. & Chawla, N., Jul 25 2014, In: Journal of Alloys and Compounds. 602, p. 163-174 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Nanoindentation
  • Tomography
  • X rays
  • Characterization (materials science)
  54 Scopus citations

• 3D Microstructural Characterization of Uranium Oxide as a Surrogate Nuclear Fuel: Effect of Oxygen Stoichiometry on Grain Boundary Distributions

  Rudman, K., Dickerson, P., Byler, D., Peralta, P., Lim, H., Mcdonald, R., Dickerson, R. & Mcclellan, K., Jul 2012, In: Microscopy and Microanalysis. 18, S2, p. 1424-1425 2 p.

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• 3D modeling of discrete impurity effects in silicon quantum dots: energy level spacing and scarring effects

  Miličić, S. N., Akis, R., Vasileska, D., Gunther, A. & Goodnick, S., Nov 2000, In: Superlattices and Microstructures. 28, 5-6, p. 461-467 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Semiconductor quantum dots
  • Poisson equation
  • Silicon
  • 3D modeling
  • Electron energy levels

• 3-D Modeling of Irregular Volcanic Sources Using Sparsity-Promoting Inversions of Geodetic Data and Boundary Element Method

  Zhai, G. & Shirzaei, M., Dec 2017, In: Journal of Geophysical Research: Solid Earth. 122, 12, p. 10,515-10,537

  Research output: Contribution to journal › Article › peer-review

  • datum (elevation)
  • geodesy
  • volcanology
  • geodetic datum
  • boundary element method

• 3D Monte-Carlo device simulations using an effective quantum potential including electron-electron interactions

  Heitzinger, C., Ringhofer, C., Ahmed, S. & Vasileska, D., Sep 1 2007, In: Journal of Computational Electronics. 6, 1-3, p. 15-18 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Electron-electron interactions
  • Electron
  • Electrons
  • electron scattering
  • Monte Carlo Simulation
  7 Scopus citations

• 3-D Monte Carlo device simulator for variability modeling of p-MOSFETs

  Camargo, V. V. A., Rossetto, A. C. J., Vasileska, D. & Wirth, G. I., Jun 1 2020, In: Journal of Computational Electronics. 19, 2, p. 668-676 9 p.

  Research output: Contribution to journal › Article › peer-review

  • MOSFET
  • Simulator
  • 3D
  • simulators
  • field effect transistors
  1 Scopus citations

• 3D nanocrystal images at atomic resolution from diffraction data using iterative algorithms

  Wu, J. S. & Spence, J., 2003, In: Microscopy and Microanalysis. 9, SUPPL. 2, p. 1184-1185 2 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D nanostructured inkjet printed graphene: Via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices

  Das, S. R., Nian, Q., Cargill, A. A., Hondred, J. A., Ding, S., Saei, M., Cheng, G. J. & Claussen, J. C., Sep 21 2016, In: Nanoscale. 8, 35, p. 15870-15879 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Electrochemical devices
  • Laser beam effects
  • Graphite
  • Pulsed lasers
  • Electronic equipment
  71 Scopus citations

• 3D Navier-Stokes and Euler equations with initial data characterized by uniformly large vorticity

  Babin, A., Mahalov, A. & Nicolaenko, B., 2001, In: Indiana University Mathematics Journal. 50, SUPPL., p. 1-34 34 p.

  Research output: Contribution to journal › Article › peer-review

  • Euler Equations
  • Navier-Stokes Equations
  • Regularity
  • Global Regularity
  • Bootstrapping
  87 Scopus citations

• 3D NEGF quantum transport simulator for modeling ballistic transport in nano FinFETs

  Khan, H. R., Mamaluy, D. & Vasileska, D., Mar 1 2008, In: Journal of Physics: Conference Series. 107, 1, 012007.

  Research output: Contribution to journal › Article › peer-review

  • simulators
  • ballistics
  • Green's functions
  • formalism
  • solid state
  7 Scopus citations

• 3D out-of-plane rotational etching with pinned catalysts in metal-assisted chemical etching of silicon

  Hildreth, O. J., Brown, D. & Wong, C. P., Aug 23 2011, In: Advanced Functional Materials. 21, 16, p. 3119-3128 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Silicon
  • Etching
  • catalysts
  • Metals
  • Catalysts
  54 Scopus citations

• 3D parallel Monte Carlo simulation of GaAs MESFETs

  Pennathur, S., Sandalci, C. K., Koç, Ç. K. & Goodnick, S. M., 1998, In: VLSI Design. 6, 1-4, p. 273-276 4 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Simulators
  • Parallel algorithms
  • Boltzmann equation
  • Decomposition

• 3-D phase-field simulations of self-organized composite morphologies in physical vapor deposited phase-separating binary alloys

  Ankit, K., Derby, B., Raghavan, R., Misra, A. & Demkowicz, M. J., Aug 21 2019, In: Journal of Applied Physics. 126, 7, 075306.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • binary alloys
  • vapor phases
  • modulation
  • composite materials
  • simulation
  6 Scopus citations

• 3D-Printable Biodegradable Polyester Tissue Scaffolds for Cell Adhesion

  Sirrine, J. M., Pekkanen, A. M., Nelson, A. M., Chartrain, N. A., Williams, C. B. & Long, T. E., 2015, In: Australian Journal of Chemistry. 68, 9, p. 1409-1414 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cell adhesion
  • Tissue Scaffolds
  • Polyesters
  • Tissue engineering
  • adipic acid
  15 Scopus citations

• 3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation

  Yang, Y., Li, X., Zheng, X., Chen, Z., Zhou, Q. & Chen, Y., Mar 1 2018, In: Advanced Materials. 30, 9, 1704912.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Biomimetics
  • Oils
  • Water
  • Carbon Nanotubes
  • Microstructure
  160 Scopus citations

• 3D-Printed Cactus-Inspired Spine Structures for Highly Efficient Water Collection

  Li, X., Yang, Y., Liu, L., Chen, Y., Chu, M., Sun, H., Shan, W. & Chen, Y., Feb 1 2020, In: Advanced Materials Interfaces. 7, 3, 1901752.

  Research output: Contribution to journal › Article › peer-review

  • Water
  • Coatings
  • Biomimetics
  • Free energy
  • Fog
  7 Scopus citations

• 3D printed droplet generation devices for serial femtosecond crystallography enabled by surface coating

  Echelmeier, A., Kim, D., Villarreal, J. C., Coe, J., Quintana, S., Brehm, G., Ana Egatz-Gomez, E-G., Nazari, R., Sierra, R. G., Koglin, J. E., Batyuk, A., Hunter, M. S., BastienBoutet, S., Zatsepin, N., Kirian, R. A., Grant, T. D., Fromme, P. & Ros, A., 2019, In: Journal of Applied Crystallography. 52, p. 997-1008 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Crystallography
  • X-Rays
  • Coatings
  • Crystals
  • Equipment and Supplies
  9 Scopus citations

• 3D printed nervous system on a chip

  Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W. & McAlpine, M. C., Apr 21 2016, In: Lab on a Chip. 16, 8, p. 1393-1400 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Neurology
  • Nervous System
  • Three-Dimensional Printing
  • Biomimetics
  • Printing
  89 Scopus citations

• 3D Printing All-Aromatic Polyimides using Mask-Projection Stereolithography: Processing the Nonprocessable

  Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B. & Long, T. E., Aug 18 2017, In: Advanced Materials. 29, 31, 1701240.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stereolithography
  • Polyimides
  • Masks
  • Printing
  • Water filtration
  63 Scopus citations

• 3D Printing All-Aromatic Polyimides Using Stereolithographic 3D Printing of Polyamic Acid Salts

  Herzberger, J., Meenakshisundaram, V., Williams, C. B. & Long, T. E., Apr 17 2018, In: ACS Macro Letters. 7, 4, p. 493-497 5 p.

  Research output: Contribution to journal › Article › peer-review

  • polyamic acid
  • Polyimides
  • Salts
  • Printing
  • Acids
  25 Scopus citations

• 3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization

  Sirrine, J. M., Zlatanic, A., Meenakshisundaram, V., Messman, J. M., Williams, C. B., Dvornic, P. R. & Long, T. E., Feb 1 2019, In: Macromolecular Chemistry and Physics. 220, 4, 1800425.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Siloxanes
  • Photopolymerization
  • Photopolymers
  • Terpolymers
  • polysiloxanes
  15 Scopus citations

• 3D printing graphene-aluminum nanocomposites

  Hu, Z., Chen, F., Xu, J., Nian, Q., Lin, D., Chen, C., Zhu, X., Chen, Y. & Zhang, M., May 25 2018, In: Journal of Alloys and Compounds. 746, p. 269-276 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Graphite
  • Aluminum
  • Nanocomposites
  • Printing
  • Composite materials
  45 Scopus citations

• 3D Printing Latex: A Route to Complex Geometries of High Molecular Weight Polymers

  Scott, P. J., Meenakshisundaram, V., Hegde, M., Kasprzak, C. R., Winkler, C. R., Feller, K. D., Williams, C. B. & Long, T. E., Mar 4 2020, In: ACS Applied Materials and Interfaces. 12, 9, p. 10918-10928 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Photopolymerization
  • Latexes
  • Latex
  • Molecular weight
  • Printing
  5 Scopus citations

• 3D Printing of Flexible Liquid Sensor Based on Swelling Behavior of Hydrogel with Carbon Nanotubes

  Li, X., Yang, Y., Xie, B., Chu, M., Sun, H., Hao, S., Chen, Y. & Chen, Y., Feb 1 2019, In: Advanced Materials Technologies. 4, 2, 1800476.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Nanotubes
  • Hydrogels
  • Polyethylene Glycol Dimethacrylate Hydrogel
  • Swelling
  • Printing
  9 Scopus citations

• 3D printing of gas-dynamic virtual nozzles and optical characterization of high-speed microjets

  Nazari, R., Zaare, S., Alvarez, R. C., Karpos, K., Engelman, T., Madsen, C., Nelson, G., Spence, J., Weierstall, U., Adrian, R. J. & Kirian, R., Jul 20 2020, In: Optics Express. 28, 15, p. 21749-21765 17 p.

  Research output: Contribution to journal › Article › peer-review

  • gas dynamics
  • printing
  • nozzles
  • high speed
  • characterization
  2 Scopus citations

• 3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

  Li, X., Yuan, Y., Liu, L., Leung, Y. S., Chen, Y., Guo, Y., Chai, Y. & Chen, Y., Mar 1 2020, In: Bio-Design and Manufacturing. 3, 1, p. 15-29 15 p.

  Research output: Contribution to journal › Article › peer-review

  • tricalcium phosphate
  • Three-Dimensional Printing
  • Hydroxyapatite
  • Scaffolds
  • Phosphates
  8 Scopus citations

• 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi₂Te₃-based inks

  Kim, F., Kwon, B., Eom, Y., Lee, J. E., Park, S., Jo, S., Park, S. H., Kim, B. S., Im, H. J., Lee, M. H., Min, T. S., Kim, K. T., Chae, H. G., King, W. P. & Son, J. S., Apr 1 2018, In: Nature Energy. 3, 4, p. 301-309 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Ink
  • Thermoelectric energy conversion
  • Geometry
  • Waste heat
  • 3D printers
  83 Scopus citations

• 3D printing phosphonium ionic liquid networks with mask projection microstereolithography

  Schultz, A. R., Lambert, P. M., Chartrain, N. A., Ruohoniemi, D. M., Zhang, Z., Jangu, C., Zhang, M., Williams, C. B. & Long, T. E., Nov 18 2014, In: ACS Macro Letters. 3, 11, p. 1205-1209 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Ionic Liquids
  • Ionic liquids
  • Masks
  • Printing
  • Monomers
  55 Scopus citations

• 3D Printing Polymers with Supramolecular Functionality for Biological Applications

  Pekkanen, A. M., Mondschein, R. J., Williams, C. B. & Long, T. E., Sep 11 2017, In: Biomacromolecules. 18, 9, p. 2669-2687 19 p.

  Research output: Contribution to journal › Article › peer-review

  • Tissue Scaffolds
  • Printing
  • Polymers
  • 3D printers
  • Scaffolds
  42 Scopus citations

• 3-D Projected L₁ inversion of gravity data using truncated unbiased predictive risk estimator for regularization parameter estimation

  Vatankhah, S., Renaut, R. & Ardestani, V. E., Sep 1 2017, In: Geophysical Journal International. 210, 3, p. 1872-1887 16 p.

  Research output: Contribution to journal › Article › peer-review

  • estimators
  • parameter estimation
  • Parameter estimation
  • Gravitation
  • inversions
  15 Scopus citations

• 3D radar wavefield tomography of comet interiors

  Sava, P. & Asphaug, E., Apr 15 2018, In: Advances in Space Research. 61, 8, p. 2198-2213 16 p.

  Research output: Contribution to journal › Article › peer-review

  • comet nuclei
  • comets
  • radar
  • comet
  • radar transmission
  4 Scopus citations

• 3-D resistive memory arrays: From intrinsic switching behaviors to optimization guidelines

  Li, H., Gao, B., Chen, H. Y. H., Chen, Z., Huang, P., Liu, R., Zhao, L., Jiang, Z. J., Liu, L., Liu, X., Yu, S., Kang, J., Nishi, Y. & Wong, H. S. P., Oct 1 2015, In: IEEE Transactions on Electron Devices. 62, 10, p. 3160-3167 8 p., 7225139.

  Research output: Contribution to journal › Article › peer-review

  • Data storage equipment
  • Ions
  • Oxygen
  • Energy utilization
  • Electric potential
  14 Scopus citations

• 3D scene-based beam selection for mmWave communications

  Xu, W., Gao, F., Jin, S. & Alkhateeb, A., Nov 2020, In: IEEE Wireless Communications Letters. 9, 11, p. 1850-1854 5 p., 9129762.

  Research output: Contribution to journal › Article › peer-review

  • Deep learning
  • Communication
  • Cameras
  • Neural networks
  • Costs

• 3D Simulation of Deep-Submicron Devices: How Impurity Atoms Affect Conductance

  Zhou, F. R. & Ferry, D. K., 1995, In: IEEE Computational Science and Engineering. 2, 2, p. 30-37 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Doping (additives)
  • Impurities
  • Electric current control
  • Atoms
  • Statistical methods
  31 Scopus citations

• 3D simulation of GaAs/AlGaAs quantum dot point contact structures

  Vasileska, D., Wybourne, M. N., Goodnick, S. & Gunther, A. D., Jan 1 1998, In: Semiconductor Science and Technology. 13, 8 SUPPL. A, p. A37-A40

  Research output: Contribution to journal › Article › peer-review

  • gallium arsenide
  • Semiconductor quantum dots
  • Point contacts
  • Electrons
  • aluminum gallium arsenides
  11 Scopus citations

• 3D simulations of ultra-small MOSFETs with real-space treatment of the electron-electron and electron-ion interactions

  Gross, W. J., Vasileska, D. & Ferry, D. K., Jan 1 2000, In: Unknown Journal. 10, 4, p. 437-452 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Electrons
  • Ions
  • Carrier concentration
  • Charge density
  • Doping (additives)
  34 Scopus citations

• 3D spirals with controlled chirality fabricated using metal-assisted chemical etching of silicon

  Hildreth, O. J., Fedorov, A. G. & Wong, C. P., Nov 27 2012, In: ACS nano. 6, 11, p. 10004-10012 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Chirality
  • Silicon
  • chirality
  • Etching
  • Metals
  38 Scopus citations

• 3D temperature gradient effect on a steel–concrete composite deck in a suspension bridge with field monitoring data

  Wang, D., Liu, Y. & Liu, Y., Jul 1 2018, In: Structural Control and Health Monitoring. 25, 7, e2179.

  Research output: Contribution to journal › Article › peer-review

  • Suspension bridges
  • Thermal gradients
  • Composite materials
  • Monitoring
  • Thermal stress
  6 Scopus citations

• 3D time-resolved observations of corrosion and corrosion-fatigue crack initiation and growth in peak-aged Al 7075 using synchrotron X-ray tomography

  Stannard, T. J., Williams, J. J., Singh, S. S., Sundaram Singaravelu, A. S., Xiao, X. & Chawla, N., Jul 1 2018, In: Corrosion Science. 138, p. 340-352 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Corrosion fatigue
  • Crack initiation
  • Tomography
  • X rays
  16 Scopus citations

• 3D Time-Resolved Observations of Fatigue Crack Initiation and Growth from Corrosion Pits in Al 7XXX Alloys Using In Situ Synchrotron X-ray Tomography

  Singaravelu, A. S. S., Williams, J. J., Goyal, H. D., Niverty, S., Singh, S. S., Stannard, T. J., Xiao, X. & Chawla, N., Jan 1 2019, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • crack initiation
  • Crack initiation
  • Tomography
  • X rays
  5 Scopus citations