Find Scholarly Works

Search results

• Design, planning, and control of an origami-inspired foldable quadrotor

  Yang, D., Mishra, S., Aukes, D. M. & Zhang, W., Jul 2019, 2019 American Control Conference, ACC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2551-2556 6 p. 8814351. (Proceedings of the American Control Conference; vol. 2019-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Scopus citations

• Design, simulation, and experimental demonstration of self-assembled DNA nanostructures and motors

  Reif, J. H., LaBean, T. H., Sahu, S., Yan, H. & Yin, P., 2005, Lecture Notes in Computer Science. Banatre, J-P., Fradet, P., Giavitto, J-L. & Michel, O. (eds.). Vol. 3566. p. 173-187 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Scopus citations

• Design, simulation, fabrication and testing of flexible bow-tie antennas

  Durgun, A. C., Balanis, C., Birtcher, C. R. & Allee, D., Dec 2011, In: IEEE Transactions on Antennas and Propagation. 59, 12, p. 4425-4435 11 p., 5993500.

  Research output: Contribution to journal › Article › peer-review
  91 Scopus citations

• Design, simulation and antenna applications of spherical high impedance surfaces

  Amiri, M. A., Balanis, C. & Birtcher, C. R., Oct 25 2016, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1911-1912 2 p. 7696662

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design, simulation and applicability of total dose ionizing radiation prognostic cells in a commercial 0.25μM process

  Mikkola, E., Parks, H. G., Vermeire, B., Barnaby, H. & Goodman, D., Dec 1 2003, Proceedings of the IASTED International Conference on Circuits, Signals, and Systems. Rashid, M. H. & Rashid, M. H. (eds.). p. 214-219 6 p. (Proceedings of the IASTED International Conference on Circuits, Signals, and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design, synthesis, and biological evaluation of combretastatin nitrogen-containing derivatives as inhibitors of tubulin assembly and vascular disrupting agents

  Monk, K. A., Siles, R., Hadimani, M. B., Mugabe, B. E., Ackley, J. F., Studerus, S. W., Edvardsen, K., Trawick, M. L., Garner, C. M., Rhodes, M. R., Pettit, G. & Pinney, K. G., May 1 2006, In: Bioorganic and Medicinal Chemistry. 14, 9, p. 3231-3244 14 p.

  Research output: Contribution to journal › Article › peer-review
  68 Scopus citations

• Design, synthesis, and evaluation of an α-tocopherol analogue as a mitochondrial antioxidant

  Lu, J., Khdour, O., Armstrong, J. S. & Hecht, S., Nov 1 2010, In: Bioorganic and Medicinal Chemistry. 18, 21, p. 7628-7638 11 p.

  Research output: Contribution to journal › Article › peer-review
  14 Scopus citations

• Design, synthesis, and evaluation of azepine-based cryptophycin mimetics

  Smith, A. B., Cho, Y. S., Pettit, G. & Hirschmann, R., Aug 25 2003, In: Tetrahedron. 59, 35, p. 6991-7009 19 p.

  Research output: Contribution to journal › Article › peer-review
  26 Scopus citations

• Design, synthesis, and functionalization of nanomaterials for therapeutic drug delivery

  Grandhi, T. S. P. & Rege, K., 2014, In: Advances in experimental medicine and biology. 811, p. 157-182 26 p.

  Research output: Contribution to journal › Article › peer-review
  5 Scopus citations

• Design, synthesis, biochemical, and biological evaluation of nitrogen-containing trifluoro structural modifications of combretastatin A-4

  Hall, J. J., Sriram, M., Strecker, T. E., Tidmore, J. K., Jelinek, C. J., Kumar, G. D. K., Hadimani, M. B., Pettit, G., Chaplin, D. J., Trawick, M. L. & Pinney, K. G., Sep 15 2008, In: Bioorganic and Medicinal Chemistry Letters. 18, 18, p. 5146-5149 4 p.

  Research output: Contribution to journal › Article › peer-review
  24 Scopus citations

• Design, synthesis and photophysical studies of phenylethynyl-bridged phthalocyanine-fullerene dyads

  Arero, J., Kodis, G., Schmitz, R. A., Mendez-Hernandez, D. D., Moore, T., Moore, A. & Gust, D., Aug 27 2015, In: Journal of Porphyrins and Phthalocyanines. 19, 8, p. 934-945 12 p.

  Research output: Contribution to journal › Article › peer-review
  6 Scopus citations

• Design & society: A general education experience for freshmen

  Hasenberg, C., Natter, B. & Jhaj, S., 2005, In: ASEE Annual Conference and Exposition, Conference Proceedings. p. 2915-2921 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Scopus citations

• Designability of graphitic cones

  Treacy, M. & Kilian, J., 2001, Materials Research Society Symposium - Proceedings. Robertson, J., Friedmann, T., Geohegan, D., Luzzi, D. & Ruoff, R. (eds.). Vol. 675.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Scopus citations

• Design Advancement of an Indoor Soil Deposition Chamber: A Road to Standardization

  Hammond, Z., Curtis, T., Simpson, L. & Tamizhmani, G., Jun 2019, 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019. Institute of Electrical and Electronics Engineers Inc., p. 3263-3268 6 p. 8981244. (Conference Record of the IEEE Photovoltaic Specialists Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Scopus citations

• Design and analysis of a CMOS passive ∑δ ADC for low power RF transceivers

  Chen, F., Bakkaloglu, B. & Ramaswamy, S., May 2009, In: Analog Integrated Circuits and Signal Processing. 59, 2, p. 129-141 13 p.

  Research output: Contribution to journal › Article › peer-review
  16 Scopus citations

• Design and analysis of a distributed multi-leg stock trading system

  Zou, J., Su, G., Iyengar, A., Yuan, Y. & Ge, Y., Aug 25 2011, Proceedings - 31st International Conference on Distributed Computing Systems, ICDCS 2011. p. 13-24 12 p. 5961684. (Proceedings - International Conference on Distributed Computing Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Scopus citations

• Design and analysis of an auto-parametrically excited platform for active vibration control

  Le, T., Bhat, S. G., Subramanian, S. C., Waswa, P. M. B. & Redkar, S., 2019, 15th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Scopus citations

• Design and analysis of a potential-based controller for safe robot navigation in unknown GPS-denied environments with strictly convex obstacles

  Farivarnejad, H. & Berman, S., Oct 2020, In: Systems and Control Letters. 144, 104772.

  Research output: Contribution to journal › Article › peer-review
  1 Scopus citations

• Design and Analysis of a Prediction System about Influenza-Like Illness from the Latent Temporal and Spatial Information

  Guo, X., Xiong, N. N., Wang, H. & Ren, J., Jan 1 2022, In: IEEE Transactions on Systems, Man, and Cybernetics: Systems. 52, 1, p. 66-77 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• Design and analysis of a PZT-based micromachined acoustic sensor with increased sensitivity

  Wang, Z., Wang, C. & Liu, L., Oct 2005, In: IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 52, 10, p. 1840-1850 11 p.

  Research output: Contribution to journal › Article › peer-review
  26 Scopus citations

• Design and analysis of a randomized controlled trial of steps to respect: A school-based bullying prevention program

  Low, S. M., Smith, B. H., Brown, E. C., Fernandez, K., Hanson, K. & Haggerty, K. P., Jan 1 2011, Bullying in North American Schools, Second Edition. Taylor and Francis, p. 299-311 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  3 Scopus citations

• Design and analysis of clinical trials in transplantation: Principles and pitfalls

  Schold, J. D. & Kaplan, B., Sep 2008, In: American Journal of Transplantation. 8, 9, p. 1779-1785 7 p.

  Research output: Contribution to journal › Short survey › peer-review
  6 Scopus citations

• Design and Analysis of Energy-Efficient and Reliable 3-D ReRAM Cross-Point Array System

  Mao, M., Yu, S. & Chakrabarti, C., Jul 2018, In: IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 26, 7, p. 1290-1300 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  11 Scopus citations

• Design and analysis of experiments on random drift and inbreeding depression

  Lynch, M., Jan 1 1988, In: Genetics. 120, 3, p. 791-807 17 p.

  Research output: Contribution to journal › Article › peer-review
  115 Scopus citations

• Design and analysis of LDPC decoders for software defined radio

  Seo, S., Mudge, T., Zhu, Y. & Chakrabarti, C., Dec 1 2007, 2007 IEEE Workshop on Signal Processing Systems, SiPS 2007, Proceedings. p. 210-215 6 p. 4387546. (IEEE Workshop on Signal Processing Systems, SiPS: Design and Implementation).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  28 Scopus citations

• Design and analysis of networks with large components in presence of region-based faults

  Banerjee, S., Shirazipourazad, S. & Sen, A., 2011, 2011 IEEE International Conference on Communications, ICC 2011. 5962427. (IEEE International Conference on Communications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  18 Scopus citations

• Design and analysis of new lensed-fiber for laser to fiber coupling

  Lee, T. X., Sun, C. C., Chen, Y. M., Chen, Y-C. & Lee, C. H., Jan 1 2003, CLEO/Pacific Rim 2003 - 5th Pacific Rim Conference on Lasers and Electro-Optics: Photonics Lights Innovation, from Nano-Structures and Devices to Systems and Networks, Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 1. 1 p. 1274672

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and analysis of the Community Youth Development Study longitudinal cohort sample

  Brown, E. C., Graham, J. W., Hawkins, J. D., Arthur, M. W., Baldwin, M. M., Oesterle, S., Briney, J. S., Catalano, R. F. & Abbott, R. D., Aug 2009, In: Evaluation Review. 33, 4, p. 311-334 24 p.

  Research output: Contribution to journal › Article › peer-review
  48 Scopus citations

• DESIGN AND APPLICATIONS OF HIGH-VOLTAGE SYNTHETIC INSULATORS.

  Karady, G. & Limmer, H. D., 1979, Proceedings of the American Power Conference. Am Power Conf, Vol. 41. p. 1120-1125 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Design and assessment of a sustainable networked system in the U.S.; Case study of book delivery system

  Junbeum, K., Ming, X., Kahhat, R., Allenby, B. & Williams, E., 2008, 2008 16th IEEE International Symposium on Electronics and the Environment, ISEE. 4562874. (IEEE International Symposium on Electronics and the Environment).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Scopus citations

• Design and baseline characteristics of study participants in the Wheat Bran Fiber trial

  Martínez, M. E., Reid, M. E., Guillén-Rodríguez, J., Marshall, J. R., Sampliner, R., Aickin, M., Ritenbaugh, C., Van Leeuwen, B., Mason-Liddil, N., Giuliano, A., Vargas, P. A. & Alberts, D. S., Sep 1998, In: Cancer Epidemiology Biomarkers and Prevention. 7, 9, p. 813-816 4 p.

  Research output: Contribution to journal › Article › peer-review
  40 Scopus citations

• Design and calibration of a virtual tomographic reflection system

  Shelton, D., Wu, B., Klatzky, R. & Stetten, G., Nov 27 2007, 2007 4th IEEE International Symposium on Biomedical Imaging: From Nano to Macro - Proceedings. p. 956-959 4 p. 4193446. (2007 4th IEEE International Symposium on Biomedical Imaging: From Nano to Macro - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Scopus citations

• Design and CFD modelling of the anodic chamber of a continuous PhotoFuelCell reactor for water treatment

  Phuan, Y. W., Ismail, H. M., Garcia-Segura, S. & Chong, M. N., Oct 2017, In: Process Safety and Environmental Protection. 111, p. 449-461 13 p.

  Research output: Contribution to journal › Article › peer-review
  8 Scopus citations

• Design and characterization of a balloon-borne diffraction-limited submillimeter telescope platform for BLAST-TNG

  Lourie, N. P., Angilé, F. E., Ashton, P. C., Catanzaro, B., Devlin, M. J., Dicker, S., Didier, J., Dober, B., Fissel, L. M., Galitzki, N., Gordon, S., Klein, J., Lowe, I., Mauskopf, P., Nati, F., Novak, G., Romualdez, L. J., Soler, J. D. & Williams, P. A., 2018, Ground-Based and Airborne Telescopes VII. Marshall, H. K. & Spyromilio, J. (eds.). SPIE, 1070022. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10700).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Scopus citations

• Design and characterization of a broadband focal plane array for THz imaging

  Topalli, K., Trichopoulos, G. C. & Sertel, K., Dec 1 2011, Proceedings of the 2011 IEEE National Aerospace and Electronics Conference, NAECON 2011. p. 9-10 2 p. 6183068. (National Aerospace and Electronics Conference, Proceedings of the IEEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and characterization of a single channel two-liquid capacitor and its application to hyperelastic strain sensing

  Liu, S., Sun, X., Hildreth, O. J. & Rykaczewski, K., Mar 7 2015, In: Lab on a Chip. 15, 5, p. 1376-1384 9 p.

  Research output: Contribution to journal › Article › peer-review
  21 Scopus citations

• Design and characterization of GaNInGaN solar cells

  Jani, O., Ferguson, I., Honsberg, C. & Kurtz, S., 2007, In: Applied Physics Letters. 91, 13, 132117.

  Research output: Contribution to journal › Article › peer-review
  525 Scopus citations

• Design and characterization of shoe embedded pressure sensors for gait analysis and rehabilitation

  Wachte, S. W., Hassett, B., Qiao, Z., Chinimilli, P. T. & Zhang, W., 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Scopus citations

• Design and characterization of the MUSCAT detectors

  Gomez-Rivera, V., Ade, P. A. R., Barry, P. S., Brien, T. L. R., Castillo-Dominguez, E., Ferrusca, D., Hargrave, P., Hernandez-Rebollar, J. L., Hornsby, A., Hughes, D., Jauregui-Garcia, J. M., Mauskopf, P., Murias, D., Papageorgiou, A., Pascale, E., Perez, A., Rodriguez, I., Rowe, S., Tapia, M., Tucker, C. & 3 others, Velazquez, M., Ventura, S. & Doyle, S., 2020, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X. Zmuidzinas, J. & Gao, J-R. (eds.). SPIE, 114531Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11453).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and Computational Modeling of Fabric Soft Pneumatic Actuators for Wearable Assistive Devices

  Nguyen, P. H. & Zhang, W., Dec 1 2020, In: Scientific reports. 10, 1, 9638.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  24 Scopus citations

• Design and construction aspects of steel fiber-reinforced concrete elevated slabs

  Mobasher, B. & Destrée, X., 2010, Fiber Reinforced Self-Consolidating Concrete: Research and Applications - Technical Sessions at the ACI Fall 2009 Convention. 274 SP ed. p. 95-107 13 p. (American Concrete Institute, ACI Special Publication; no. 274 SP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Scopus citations

• Design and construction issues for 300mm semiconductor manufacturing facilities

  Merchant, S. & Chasey, A., Dec 1 2000, Proceedings of Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World. p. 714-726 13 p. (Proceedings of Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World; vol. 278).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and construction of a carbon fiber gondola for the SPIDER balloon-borne telescope

  Soler, J. D., Ade, P. A. R., Amiri, M., Benton, S. J., Bock, J. J., Bond, J. R., Bryan, S. A., Chiang, C., Contaldi, C. C., Crill, B. P., Doré, O. P., Farhang, M., Filippini, J. P., Fissel, L. M., Fraisse, A. A., Gambrel, A. E., Gandilo, N. N., Golwala, S., Gudmundsson, J. E., Halpern, M. & 27 others, Hasselfield, M., Hilton, G. C., Holmes, W. A., Hristov, V. V., Irwin, K. D., Jones, W. C., Kermish, Z. K., Kuo, C. L., Mactavish, C. J., Mason, P. V., Megerian, K. G., Moncelsi, L., Morford, T., Nagy, J. M., Netterfield, C. B., Rahlin, A. S., Reintsema, C. D., Ruhl, J. E., Runyan, M. C., Shariff, J. A., Trangsrud, A., Tucker, C., Tucker, R. S., Turner, A. D., Weber, A. C., Wiebe, D. V. & Young, E. Y., 2014, Ground-Based and Airborne Telescopes V. Hall, H. J., Stepp, L. M. & Gilmozzi, R. (eds.). SPIE, 91450T. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9145).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Scopus citations

• Design and construction of a cascading pressure reactor prototype for solar-thermochemical hydrogen production

  Ermanoski, I., Grobbel, J., Singh, A., Lapp, J., Brendelberger, S., Roeb, M., Sattler, C., Whaley, J., McDaniel, A. & Siegel, N. P., May 31 2016, SolarPACES 2015: International Conference on Concentrating Solar Power and Chemical Energy Systems. Rajpaul, V. & Richter, C. (eds.). American Institute of Physics Inc., 120001. (AIP Conference Proceedings; vol. 1734).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  13 Scopus citations

• Design and construction of a high-energy photon polarimeter

  Dugger, M., Ritchie, B., Sparks, N., Moriya, K., Tucker, R. J., Lee, R. J., Thorpe, B. N., Hodges, T., Barbosa, F. J., Sandoval, N. & Jones, R. T., Sep 21 2017, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 867, p. 115-127 13 p.

  Research output: Contribution to journal › Article › peer-review
  11 Scopus citations

• Design and Construction of Controlled Back Reflectors for Bifacial Photovoltaic Modules

  Bowersox, D. & Tamizh Mani, G. S., Nov 26 2018, 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC. Institute of Electrical and Electronics Engineers Inc., p. 1735-1740 6 p. 8547940. (2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Scopus citations

• Design and control of a 3-chambered fiber reinforced soft actuator with off-the-shelf stretch sensors

  Nguyen, P. H., Sridar, S., Zhang, W. & Polygerinos, P., Sep 1 2017, In: International Journal of Intelligent Robotics and Applications. 1, 3, p. 342-351 10 p.

  Research output: Contribution to journal › Article › peer-review
  16 Scopus citations

• Design and control of a 3 DOF in-parallel actuated manipulator

  Pfreundschuh, G. H., Kumar, V. & Sugar, T. G., Jan 1 1991, In: Proceedings - IEEE International Conference on Robotics and Automation. 2, p. 1659-1664 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  36 Scopus citations

• Design and control of a compliant parallel manipulator

  Sugar, T. & Kumar, V., Dec 2002, In: Journal of Mechanical Design, Transactions of the ASME. 124, 4, p. 676-683 8 p.

  Research output: Contribution to journal › Article › peer-review
  21 Scopus citations

• Design and Control of a Compliant Parallel Manipulator

  Sugar, T. G. & Kumar, V., 2002, In: ASME Journal of Mechanical Design.

  Research output: Contribution to journal › Article › peer-review

  21 Scopus citations