Find Scholarly Works

Search results

• 3D inversion of gravity data using graph theory; Application of the method on mobrun ore body

  Soodmand Niri, S., Vatankhah, S., Ebrahimzadeh Ardestani, V. & Anne Renaut, R., 2019.

  Research output: Contribution to conference › Paper › peer-review

• 3D inverted opal hydrogel scaffolds with oxygen sensing capability

  Liu, Y. & Wang, S., Jul 1 2007, In: Colloids and Surfaces B: Biointerfaces. 58, 1, p. 8-13 6 p.

  Research output: Contribution to journal › Article › peer-review
  14 Scopus citations

• 3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation

  Singh, S. S., Schwartzstein, C., Williams, J. J., Xiao, X., De Carlo, F. & Chawla, N., Jul 25 2014, In: Journal of Alloys and Compounds. 602, p. 163-174 12 p.

  Research output: Contribution to journal › Article › peer-review
  66 Scopus citations

• 3D Microstructural Characterization of Uranium Oxide as a Surrogate Nuclear Fuel: Effect of Oxygen Stoichiometry on Grain Boundary Distributions

  Rudman, K., Dickerson, P., Byler, D., Peralta, P., Lim, H., Mcdonald, R., Dickerson, R. & Mcclellan, K., Jul 2012, In: Microscopy and Microanalysis. 18, S2, p. 1424-1425 2 p.

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• 3D microstructure visualization and modeling of the mechanical behavior of SiC particle reinforced aluminum composites

  Wunsch, B., Deng, X. & Chawla, N., Sep 27 2004, In: High Performance Structures and Materials. 6, p. 175-184 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  7 Scopus citations

• 3D microstructure visualization of SiC particle reinforced Al matrix composites by X-ray synchrotron tomography

  Silva, F. A., Williams, J. J., Chawla, N., Müller, B. R., Hentschel, M. P. & Portella, P. D., 2009, ICCM International Conferences on Composite Materials.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D modeling of complex helicopter structures: Predictions and measurements

  Polycarpou, A. C., Han, D. H., Georgakopoulos, S. V. & Balanis, C., 2000, Annual Review of Progress in Applied Computational Electromagnetics. Monterey, CA, United States: Applied Computational Electromagnetics Soc, Vol. 1. p. 387-394 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D modeling of discrete impurity effects in silicon quantum dots: energy level spacing and scarring effects

  Miličić, S. N., Akis, R., Vasileska, D., Gunther, A. & Goodnick, S., Nov 2000, In: Superlattices and Microstructures. 28, 5-6, p. 461-467 7 p.

  Research output: Contribution to journal › Article › peer-review

• 3-D Modeling of Irregular Volcanic Sources Using Sparsity-Promoting Inversions of Geodetic Data and Boundary Element Method

  Zhai, G. & Shirzaei, M., Dec 2017, In: Journal of Geophysical Research: Solid Earth. 122, 12, p. 10,515-10,537

  Research output: Contribution to journal › Article › peer-review

• 3D modeling of silicon quantum dots

  Miličić, S. N., Badrieh, F., Vasileska, D., Gunther, A. & Goodnick, S., May 2000, In: Superlattices and Microstructures. 27, 5, p. 377-382 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Scopus citations

• 3D Monte-Carlo device simulations using an effective quantum potential including electron-electron interactions

  Heitzinger, C., Ringhofer, C., Ahmed, S. & Vasileska, D., Sep 2007, In: Journal of Computational Electronics. 6, 1-3, p. 15-18 4 p.

  Research output: Contribution to journal › Article › peer-review
  8 Scopus citations

• 3-D Monte Carlo device simulator for variability modeling of p-MOSFETs

  Camargo, V. V. A., Rossetto, A. C. J., Vasileska, D. & Wirth, G. I., Jun 1 2020, In: Journal of Computational Electronics. 19, 2, p. 668-676 9 p.

  Research output: Contribution to journal › Article › peer-review
  3 Scopus citations

• 3D Monte Carlo simulation of FinFET using FMM algorithm

  Khan, H. R. & Vasileska, D., Dec 1 2004, 2004 10th International Workshop on Computational Electronics, IEEE IWCE-10 2004, Abstracts. p. 192-193 2 p. (2004 10th International Workshop on Computational Electronics, IEEE IWCE-10 2004, Abstracts).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D nanocrystal images at atomic resolution from diffraction data using iterative algorithms

  Wu, J. S. & Spence, J., 2003, In: Microscopy and Microanalysis. 9, SUPPL. 2, p. 1184-1185 2 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D nanostructured inkjet printed graphene: Via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices

  Das, S. R., Nian, Q., Cargill, A. A., Hondred, J. A., Ding, S., Saei, M., Cheng, G. J. & Claussen, J. C., Sep 21 2016, In: Nanoscale. 8, 35, p. 15870-15879 10 p.

  Research output: Contribution to journal › Article › peer-review
  88 Scopus citations

• 3D Navier-Stokes and Euler equations with initial data characterized by uniformly large vorticity

  Babin, A., Mahalov, A. & Nicolaenko, B., 2001, In: Indiana University Mathematics Journal. 50, SUPPL., p. 1-34 34 p.

  Research output: Contribution to journal › Article › peer-review
  95 Scopus citations

• 3D NEGF quantum transport simulator for modeling ballistic transport in nano FinFETs

  Khan, H. R., Mamaluy, D. & Vasileska, D., Mar 1 2008, In: Journal of Physics: Conference Series. 107, 1, 012007.

  Research output: Contribution to journal › Article › peer-review
  10 Scopus citations

• 3-D non-isothermal particle-based device simulator for p-type MOSFETs

  Rossetto, A. C. J., Camargo, V. V. A., Vasileska, D. & Wirth, G. I., Oct 2021, In: Journal of Computational Electronics. 20, 5, p. 1644-1656 13 p.

  Research output: Contribution to journal › Article › peer-review

• 3D Numerical Simulation of Secondary Wave Generation From Mountain Wave Breaking Over Europe

  Heale, C. J., Bossert, K. & Vadas, S. L., Mar 16 2022, In: Journal of Geophysical Research: Atmospheres. 127, 5, e2021JD035413.

  Research output: Contribution to journal › Article › peer-review

• 3D out-of-plane rotational etching with pinned catalysts in metal-assisted chemical etching of silicon

  Hildreth, O. J., Brown, D. & Wong, C. P., Aug 23 2011, In: Advanced Functional Materials. 21, 16, p. 3119-3128 10 p.

  Research output: Contribution to journal › Article › peer-review
  57 Scopus citations

• 3D parallel Monte Carlo simulation of GaAs MESFETs

  Pennathur, S., Sandalci, C. K., Koç, Ç. K. & Goodnick, S. M., 1998, In: VLSI Design. 6, 1-4, p. 273-276 4 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3-D phase-field simulations of self-organized composite morphologies in physical vapor deposited phase-separating binary alloys

  Ankit, K., Derby, B., Raghavan, R., Misra, A. & Demkowicz, M. J., Aug 21 2019, In: Journal of Applied Physics. 126, 7, 075306.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Scopus citations

• 3D pose estimation via elliptical fourier descriptors for deformable hand representations

  Rezaei, A., Vafadoost, M., Rezaei, S. & Daliri, A., 2008, 2nd International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2008. IEEE Computer Society, p. 1871-1875 5 p. 4535677. (2nd International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Scopus citations

• 3D pre-versus post-season comparisons of surface and relative pose of the corpus callosum in contact sport athletes

  Lao, Y., Gajawelli, N., Haas, L., Wilkins, B., Hwang, D., Tsao, S., Wang, Y., Law, M. & Leporé, N., Jan 1 2014, Medical Imaging 2014: Image Processing. SPIE, 90344E. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 9034).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Scopus citations

• 3D-Printable Biodegradable Polyester Tissue Scaffolds for Cell Adhesion

  Sirrine, J. M., Pekkanen, A. M., Nelson, A. M., Chartrain, N. A., Williams, C. B. & Long, T. E., 2015, In: Australian Journal of Chemistry. 68, 9, p. 1409-1414 6 p.

  Research output: Contribution to journal › Article › peer-review
  17 Scopus citations

• 3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation

  Yang, Y., Li, X., Zheng, X., Chen, Z., Zhou, Q. & Chen, Y., Mar 1 2018, In: Advanced Materials. 30, 9, 1704912.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  269 Scopus citations

• 3D-Printed Cactus-Inspired Spine Structures for Highly Efficient Water Collection

  Li, X., Yang, Y., Liu, L., Chen, Y., Chu, M., Sun, H., Shan, W. & Chen, Y., Feb 1 2020, In: Advanced Materials Interfaces. 7, 3, 1901752.

  Research output: Contribution to journal › Article › peer-review
  38 Scopus citations

• 3D printed droplet generation devices for serial femtosecond crystallography enabled by surface coating

  Echelmeier, A., Kim, D., Villarreal, J. C., Coe, J., Quintana, S., Brehm, G., Ana Egatz-Gomez, E-G., Nazari, R., Sierra, R. G., Koglin, J. E., Batyuk, A., Hunter, M. S., BastienBoutet, S., Zatsepin, N., Kirian, R. A., Grant, T. D., Fromme, P. & Ros, A., 2019, In: Journal of Applied Crystallography. 52, p. 997-1008 12 p.

  Research output: Contribution to journal › Article › peer-review
  12 Scopus citations

• 3D Printed Microfluidic Actuation System for Multi-step Paper-based Assays

  Agambayev, S., Bailly, M. & Christen, J. B., Nov 2019, 2019 IEEE Healthcare Innovations and Point of Care Technologies, HI-POCT 2019. Institute of Electrical and Electronics Engineers Inc., p. 155-158 4 p. 8962668. (2019 IEEE Healthcare Innovations and Point of Care Technologies, HI-POCT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printed nervous system on a chip

  Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W. & McAlpine, M. C., Apr 21 2016, In: Lab on a Chip. 16, 8, p. 1393-1400 8 p.

  Research output: Contribution to journal › Article › peer-review
  117 Scopus citations

• 3D Printing All-Aromatic Polyimides using Mask-Projection Stereolithography: Processing the Nonprocessable

  Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B. & Long, T. E., Aug 18 2017, In: Advanced Materials. 29, 31, 1701240.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  94 Scopus citations

• 3D Printing All-Aromatic Polyimides Using Stereolithographic 3D Printing of Polyamic Acid Salts

  Herzberger, J., Meenakshisundaram, V., Williams, C. B. & Long, T. E., Apr 17 2018, In: ACS Macro Letters. 7, 4, p. 493-497 5 p.

  Research output: Contribution to journal › Article › peer-review
  49 Scopus citations

• 3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization

  Sirrine, J. M., Zlatanic, A., Meenakshisundaram, V., Messman, J. M., Williams, C. B., Dvornic, P. R. & Long, T. E., Feb 1 2019, In: Macromolecular Chemistry and Physics. 220, 4, 1800425.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  24 Scopus citations

• 3D printing biomimetic materials and structures for biomedical applications

  Zhu, Y., Joralmon, D., Shan, W., Chen, Y., Rong, J., Zhao, H., Xiao, S. & Li, X., Jun 2021, In: Bio-Design and Manufacturing. 4, 2, p. 405-428 24 p.

  Research output: Contribution to journal › Review article › peer-review
  15 Scopus citations

• 3D Printing Carbonaceous Objects from Polyimide Pyrolysis

  Arrington, C. B., Rau, D. A., Vandenbrande, J. A., Hegde, M., Williams, C. B. & Long, T. E., Apr 20 2021, In: ACS Macro Letters. 10, 4, p. 412-418 7 p.

  Research output: Contribution to journal › Article › peer-review
  3 Scopus citations

• 3D printing collembola cuticle inspired superhydrophobic microstructures for potential deicing application

  Li, X. & Yang, Y., 2020, 2020 International Symposium on Flexible Automation, ISFA 2020. American Society of Mechanical Engineers (ASME), v001t07a009. (2020 International Symposium on Flexible Automation, ISFA 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Printing-Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications

  Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., Yang, Y. & Song, K., Nov 11 2021, In: Small. 17, 45, 2100817.

  Research output: Contribution to journal › Review article › peer-review
  14 Scopus citations

• 3D printing for polymer/particle-based processing: A review

  Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., Yang, Y. & Song, K., Oct 15 2021, In: Composites Part B: Engineering. 223, 109102.

  Research output: Contribution to journal › Review article › peer-review
  18 Scopus citations

• 3D printing for tissue engineering in otolaryngology

  Di Gesù, R., Acharya, A. P., Jacobs, I. & Gottardi, R., Mar 3 2020, In: Connective Tissue Research. 61, 2, p. 117-136 20 p.

  Research output: Contribution to journal › Review article › peer-review
  10 Scopus citations

• 3D printing graphene-aluminum nanocomposites

  Hu, Z., Chen, F., Xu, J., Nian, Q., Lin, D., Chen, C., Zhu, X., Chen, Y. & Zhang, M., May 25 2018, In: Journal of Alloys and Compounds. 746, p. 269-276 8 p.

  Research output: Contribution to journal › Article › peer-review
  80 Scopus citations

• 3D Printing Latex: A Route to Complex Geometries of High Molecular Weight Polymers

  Scott, P. J., Meenakshisundaram, V., Hegde, M., Kasprzak, C. R., Winkler, C. R., Feller, K. D., Williams, C. B. & Long, T. E., Mar 4 2020, In: ACS Applied Materials and Interfaces. 12, 9, p. 10918-10928 11 p.

  Research output: Contribution to journal › Article › peer-review
  17 Scopus citations

• 3D Printing of Flexible Liquid Sensor Based on Swelling Behavior of Hydrogel with Carbon Nanotubes

  Li, X., Yang, Y., Xie, B., Chu, M., Sun, H., Hao, S., Chen, Y. & Chen, Y., Feb 1 2019, In: Advanced Materials Technologies. 4, 2, 1800476.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  25 Scopus citations

• 3D Printing of Functional Magnetic Materials: From Design to Applications

  Zhang, C., Li, X., Jiang, L., Tang, D., Xu, H., Zhao, P., Fu, J., Zhou, Q. & Chen, Y., Aug 20 2021, In: Advanced Functional Materials. 31, 34, 2102777.

  Research output: Contribution to journal › Review article › peer-review
  12 Scopus citations

• 3D printing of gas-dynamic virtual nozzles and optical characterization of high-speed microjets

  Nazari, R., Zaare, S., Alvarez, R. C., Karpos, K., Engelman, T., Madsen, C., Nelson, G., Spence, J. C. H., Weierstall, U., Adrian, R. J. & Kirian, R. A., Jul 20 2020, In: Optics Express. 28, 15, p. 21749-21765 17 p.

  Research output: Contribution to journal › Article › peer-review
  7 Scopus citations

• 3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

  Li, X., Yuan, Y., Liu, L., Leung, Y. S., Chen, Y., Guo, Y., Chai, Y. & Chen, Y., Mar 1 2020, In: Bio-Design and Manufacturing. 3, 1, p. 15-29 15 p.

  Research output: Contribution to journal › Article › peer-review
  45 Scopus citations

• 3D Printing of Nacre-Inspired Structures with Exceptional Mechanical and Flame-Retardant Properties

  Yang, Y., Wang, Z., He, Q., Li, X., Lu, G., Jiang, L., Zeng, Y., Bethers, B., Jin, J., Lin, S., Xiao, S., Zhu, Y., Wu, X., Xu, W., Wang, Q. & Chen, Y., 2022, In: Research. 2022, 9840574.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi₂Te₃-based inks

  Kim, F., Kwon, B., Eom, Y., Lee, J. E., Park, S., Jo, S., Park, S. H., Kim, B. S., Im, H. J., Lee, M. H., Min, T. S., Kim, K. T., Chae, H. G., King, W. P. & Son, J. S., Apr 1 2018, In: Nature Energy. 3, 4, p. 301-309 9 p.

  Research output: Contribution to journal › Article › peer-review
  152 Scopus citations

• 3d printing of stainless steel 316L and its weldability for corrosive environments

  Sampath, V. K., Silori, P., Paradkar, P., Niauzorau, S., Sharstniou, A., Hasib, A., Villalobos, S. & Azeredo, B., Jan 26 2022, In: Materials Science and Engineering A. 833, 142439.

  Research output: Contribution to journal › Article › peer-review

• 3D printing phosphonium ionic liquid networks with mask projection microstereolithography

  Schultz, A. R., Lambert, P. M., Chartrain, N. A., Ruohoniemi, D. M., Zhang, Z., Jangu, C., Zhang, M., Williams, C. B. & Long, T. E., Nov 18 2014, In: ACS Macro Letters. 3, 11, p. 1205-1209 5 p.

  Research output: Contribution to journal › Article › peer-review
  74 Scopus citations

• 3D Printing Polymers with Supramolecular Functionality for Biological Applications

  Pekkanen, A. M., Mondschein, R. J., Williams, C. B. & Long, T. E., Sep 11 2017, In: Biomacromolecules. 18, 9, p. 2669-2687 19 p.

  Research output: Contribution to journal › Article › peer-review
  62 Scopus citations