Scott Danielson

Assoc Professor

  • 137 Citations
  • 5 h-Index
1990 …2020
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1990 2016

  • 137 Citations
  • 5 h-Index
  • 48 Conference contribution
  • 18 Article
  • 1 Paper
Filter
Conference contribution
2016

Comparison of AUN-QA and ABET accreditation

Danielson, S., Nguyen, H. H. D. & Wigal, K. D., Jun 26 2016, 2016 ASEE Annual Conference and Exposition. American Society for Engineering Education, Vol. 2016-June.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Accreditation
Engineering education
Quality assurance
Education
Economics
2014
1 Citation (Scopus)

Integration of manufacturing into mechanical engineering education curricula

Mott, R. L., Bennett, R. J., Stratton, M. J. & Danielson, S., 2014, ASEE Annual Conference and Exposition, Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering education
Mechanical engineering
Curricula
Education
Engineers
2013

A successful engineering program-corporate partnership

Danielson, S. & Roberts, C. A., 2013, ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Planning
Industry
Engineering education
Students
1 Citation (Scopus)

Integration of manufacturing into mechanical engineering curricula

Mott, R., Bennett, R., Gartenlaub, M., Danielson, S., Stratton, M., Jack, H., Kraebber, H. & Waldrop, P., 2013, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical engineering
Curricula
Education
Engineers
Engineering technology
2012
1 Citation (Scopus)

ASME'S vision 2030's import for mechanical engineering technology

Danielson, S., Perry, T. & Kirkpatrick, A. T., 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
Mechanical engineering
Education
Engineering education
Industry
10 Citations (Scopus)

ASME Vision 2030's recommendations for mechanical engineering education

Kirkpatrick, A. T., Danielson, S. & Perry, T., 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering education
Mechanical engineering
Curricula
Education
Students

Increasing student learning via an innovative capstone program

Danielson, S. & Roberts, C. A., 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
2011
18 Citations (Scopus)

ASME vision 2030: Helping to inform mechanical engineering education

Danielson, S., Kirkpatrick, A. & Ervin, E., 2011, Proceedings - Frontiers in Education Conference, FIE. 6143065

Research output: Chapter in Book/Report/Conference proceedingConference contribution

mechanical engineering
Engineering education
Mechanical engineering
engineering
Education

ASME Vision 2030: Helping to Inform Engineering Education

Danielson, S., Kirkpatick, A. & Ervin, E., Oct 15 2011, Frontiers in Education Conference Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a Small UAV with Real-time Video Surveillance

Nam, C. & Danielson, S., Jun 29 2011, 2011 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Redesign of Outboard Motors for Use in the Grand Canyon

Georgeou, T. & Danielson, S., Jun 29 2011, 2011 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vision 2030 – Creating the Future of Mechanical Engineering Education

Kirkpatrick, A., Danielson, S., Warrington, R., Smith, R., Thole, K., Wepfer, W. & Perry, T., Jun 29 2011, 2011 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

Automotive Engineering Technology: A Counter-Intuitive Path to Greater Engineering Technology Enrollment

Danielson, S. & Hinks, R., Jun 25 2008, 2008 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Automotive Engineering Technology: A Counter-Intuitive Path to Greater Engineering Technology Enrollment

Redkar, S., Rogers, B., Geogeou, T. & Danielson, S., 2008, 2008 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

CNC Machining: A Value-Added Component of Engineering Technology Education.

Georgeou, T. & Danielson, S., Jun 25 2008, 2008 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High Performance Machining: A Practical Approach to High-Speed Machining

Teo, A., Danielson, S. & Geogeou, T., Jun 25 2008, 2008 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

A Methodology For Direct Assessment Of Student Attainment Of Program Outcomes

Danielson, S. & Rogers, B., Jun 27 2007, 2007 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The State of Manufacturing Engineering Education

Danielson, S. & Georgeou, T., Jun 27 2007, 2007 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

A Rigorous Foundation for Security Engineering Programs

Rogers, B., Palmgren, D., Danielson, S. & McHenry, A., Jun 15 2006, 2006 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Beyond Measurement: Designing Engineering Outcomes to Foster Student Achievement

Morrell, D., Roberts, C., Grondin, R., Kuo, C. Y., Hinks, R., Sugar, T., Henderson, M. & Danielson, S., Jun 15 2006, 2006 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Engineering technology education in an era of globalization

Danielson, S., Hawks, V. & Hartin, J. R., 2006, Proceedings - Frontiers in Education Conference, FIE. 4116903

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
Education
Automobile electronic equipment
Curricula
Industry
5 Citations (Scopus)

Engineering Technology Education in an Era of Globalization

Danielson, S., Hawks, V. & Hartin, J., Oct 31 2006, 2006 Frontiers in Education Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Using Wind Power Assessment Project on the Hopi Reservation as a Problem-Based Learning Experience for Undergrad and graduate Students

Henderson, M., Rogers, M., Danielson, S., Morrell, D., Roberts, C., Grondin, R., Kuo, C. Y., Hinks, R. & Sugar, T., Jun 15 2006, 2006 Annual Conference Proceedings. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2005

A clean slate: Designing a mechanical systems concentration within a new engineering program

Danielson, S., Kuo, C-Y., Grondin, R., Roberts, C., Hinks, R., Henderson, M., Morrell, D. & Sugar, T., 2005, Innovations in Engineering Education 2005: Mechanical Engineering Education, Mechanical Engineering Technology Department Heads. Vol. 2005. p. 129-135 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slate
Curricula
Engineers
Planning
4 Citations (Scopus)

A flexible curriculum for a multi-disciplinary undergraduate engineering degree

Morrell, D., Roberts, C., Grondin, R., Kuo, C-Y., Hinks, R., Danielson, S. & Henderson, M., 2005, Proceedings - Frontiers in Education Conference, FIE. Vol. 2005. 1612012

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Curricula
Slate
Flexible structures
Students
4 Citations (Scopus)

Developing a multidisciplinary engineering program at Arizona state university's east campus

Roberts, C., Morrell, D., Grondin, R., Kuo, C-Y., Hinks, R., Danielson, S. & Henderson, M., 2005, ASEE Annual Conference and Exposition, Conference Proceedings. p. 4059-4074 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Slate
Accreditation
Students
Planning

Engineering technology departmental leadership

Danielson, S., Hall, T. M. & Hansen, J., 2005, ASEE Annual Conference and Exposition, Conference Proceedings. p. 5585-5594 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
Decision making

Manufacturing automation education for mechanical and manufacturing engineering technology

Gintz, J. & Danielson, S., 2005, ASEE Annual Conference and Exposition, Conference Proceedings. p. 10005-10016 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
Automation
Education
Mechanical engineering
Machinery

The body of knowledge in mechanical engineering technology

Danielson, S. & Hartin, J. R., 2005, Innovations in Engineering Education 2005: Mechanical Engineering Education, Mechanical Engineering Technology Department Heads. Vol. 2005. p. 515-519 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
Mechanical engineering
Education
Engineering education
Lead
4 Citations (Scopus)

Work in progress - A statics skills inventory

Danielson, S., Kadlowec, J., Mehta, S., Masters, C., Magill, M. & Steadman, S., 2005, Proceedings - Frontiers in Education Conference, FIE. Vol. 2005. 1611926

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Knowledge engineering
2004

Bachelor of applied science: An innovative degree program

Palmgren, D. & Danielson, S., 2004, Proceedings - Frontiers in Education Conference, FIE. Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering technology
3 Citations (Scopus)

Developing statics knowledge inventories

Danielson, S., 2004, Proceedings - Frontiers in Education Conference, FIE. Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Taxonomies
Engineering education
Teaching
Physics
1 Citation (Scopus)

Fuel cell manufacturing: An introduction to opportunities and challenges

Post, A., Rogers, B., Danielson, S. & Tamizhmani, G., 2004, ASEE Annual Conference Proceedings. p. 6001-6012 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Bibliographies
Proton exchange membrane fuel cells (PEMFC)
Automobiles
Costs
3 Citations (Scopus)

Knowledge assessment in statics: Concepts versus skills

Danielson, S., 2004, ASEE Annual Conference Proceedings. p. 8637-8646 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Teaching

Teaching four and five-axis CNC machining

Zamora, D., Danielson, S. & Biekert, R., 2004, Innovations in Engineering Education 2004: Mechanical Engineering Education, Mechanical Engineering Technology Department Heads. p. 493-497 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Teaching
Time and motion study
Engineering technology
Machine tools

Work in progress - Ethics instruction for the workplace

Danielson, S., 2004, Proceedings - Frontiers in Education Conference, FIE. Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineers
Teaching
Engineering education
Industry
2003
1 Citation (Scopus)

An innovative fuel cell theory, testing and manufacturing course

Rogers, B., Sundararajan, R., Tamizhmani, G. & Danielson, S., 2003, American Society of Mechanical Engineers, Mechanical Engineering Division Publication (MET). American Society of Mechanical Engineers, Vol. 3. p. 81-84 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Students
Testing
Engineering technology
Electrical engineering

Manufacturing enterprise company: Integration of curriculum and industry

Danielson, S., Biekert, R., Post, A., Almen, S. & Richter, N., 2003, ASEE Annual Conference Proceedings. p. 8679-8686 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Curricula
Industry
Students
Engineering technology
Joining
2002
10 Citations (Scopus)

Math-statics baseline (MSB) test: Phase I

Mehta, S. & Danielson, S., 2002, ASEE Annual Conference Proceedings. p. 11221-11228 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Strength of materials
Mechanics
2000
2 Citations (Scopus)

Concept questions for improved learning and outcome assessment in statics

Danielson, S. & Mehta, S., 2000, Proceedings - Frontiers in Education Conference. IEEE, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Physics
Taxonomies
Problem-Based Learning

National Statics Clearinghouse (NSC) database

Danielson, S., Mehta, S., Merkel, C. & Kotala, P., 2000, ASEE Annual Conference Proceedings. p. 4405-4408 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Launching
Teaching
Students
4 Citations (Scopus)

Next generation principles for enhancing student learning

Mehta, S. & Danielson, S., 2000, ASEE Annual Conference Proceedings. p. 4445-4455 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Teaching
11 Citations (Scopus)

Statics concept questions for enhancing learning

Danielson, S. & Mehta, S., 2000, ASEE Annual Conference Proceedings. p. 5269-5275 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Physics
Students
Taxonomies
Teaching
Problem-Based Learning
3 Citations (Scopus)

The scholarship of teaching: Building a foundation before reaching the pinnacle

Mehta, S. & Danielson, S., 2000, ASEE Annual Conference Proceedings. p. 6189-6196 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Students
Engineering research
1999

Self-assessment by students: An effective, valid, and simple tool?

Mehta, S. & Danielson, S., 1999, ASEE Annual Conference Proceedings. p. 4387-4392 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Accreditation
Mechanical engineering
Teaching

Teaching statics "dynamically"

Mehta, S. & Danielson, S., 1999, ASEE Annual Conference Proceedings. p. 4671-4680 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Students
Education
Feedback
1991

Designing an engineering database for telephone networks

Danielson, S., 1991, Engineering Databases: An Enterprise Resource. New York, NY, United States: Publ by ASME, p. 29-35 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Telephone
Data structures
Semantics
Electric network analysis
Computer aided design
1990

Telephone circuit tracing and computer-aided engineering

Danielson, S., 1990, Computers in Engineering 1990. Kinzel, G. L. & Rohde, S. M. (eds.). Boston, MA, United States: Publ by ASCE, p. 545-550 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Telephone circuits
Computer aided engineering
Telephone
Drawing (graphics)
Computer aided design