• 8684 Citations
  • 49 h-Index
1989 …2022
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1989 2020

Filter
Conference contribution
Conference contribution

3D microstructure visualization of SiC particle reinforced Al matrix composites by X-ray synchrotron tomography

Silva, F. A., Williams, J. J., Chawla, N., Müller, B. R., Hentschel, M. P. & Portella, P. D., 2009, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotrons
Tomography
Visualization
X rays
Microstructure
4 Citations (Scopus)

A custom lab-scale high resolution x-ray computed tomography system for 4D materials science: Imaging performance modeling and characterization

Mertens, J. C. E. & Chawla, N., 2014, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 9212. 92121E

Research output: Chapter in Book/Report/Conference proceedingConference contribution

X-ray Tomography
Materials Science
Performance Modeling
Computed Tomography
Materials science

A multi-Scale investigation of the mechanical behavior of durable sisal fiber cement composites

De Andrade Silva, F., Toledo Filho, R. D., Mobasher, B. & Chawla, N., 2010, 65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010. Vol. 6. p. 5162-5171 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cements
Fibers
Composite materials
Image resolution
Crack initiation

Challenges in data intensive science at synchrotron based 3D x-ray imaging facilities

De Carlo, F., Schwarz, N., Xao, X., Fezzaa, K., Wang, S., Jacobsen, C., Chawla, N. & Fußeis, F., 2013, TMS Annual Meeting. p. 1185-1190 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotrons
synchrotrons
Imaging techniques
X rays
Photons
3 Citations (Scopus)

Data intensive science at synchrotron based 3D x-ray imaging facilities

De Carlo, F., Xiao, X., Fezza, K., Wang, S., Schwarz, N., Jacobsen, C., Chawla, N. & Fusseis, F., 2012, 2012 IEEE 8th International Conference on E-Science, e-Science 2012. 6404468

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchrotrons
Imaging techniques
X rays
Photons
Detectors

Deformation behavior of multilayered metal-ceramic nanocomposites

Chawla, N., Singh, D., Chawla, K. K., Koopman, M. & Shen, Y. L., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cermets
Nanocomposites

Deformation mechanisms during indentation of nanoscale metallic/ceramic laminated composites

Chawla, K. K., Sun, P. L., Lin, T. Y., Chu, J. P., Singh, D. R. P., Chawla, N. & Shen, Y. L., 2009, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laminated composites
Indentation
Laminates
Steel
Copper
1 Citation (Scopus)

Effect of particle clustering on the fatigue behavior of SiC particle reinforced Al matrix composites

Deng, X., Chawla, N., Tang, F., Anderson, I. E. & Glesson, B., 2005, Materials Science and Technology. Vol. 2. p. 9-12 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Composite materials
1 Citation (Scopus)

Effects of residual surface stress and tempering on the fatigue behavior of Ancorsteel 4300

Williams, J. J., Deng, X., Chawla, N., Lindsley, B., King, P. & Narasimhan, K. S., 2006, Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2006. p. 101-109 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tempering
Tempering
Fatigue of materials
Steel
machining

Elevated temperature cyclic fatigue of high performance Al 2O 3 fibers

Chawla, N. & Kerr, M., 2005, Materials Science and Technology. Vol. 2. p. 3-6 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep
Fatigue of materials
Fibers
Temperature
1 Citation (Scopus)

Environmental effects on fatigue crack growth in 7075 aluminum alloy

Wang, F., Williams, J. J. & Chawla, N., 2010, Fatigue of Materials: Advances and Emergences in Understanding, Held During Materials Science and Technology 2010, MS and T'10. p. 29-41 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue crack propagation
Environmental impact
Aluminum alloys
Moisture
Ultrahigh vacuum

Fatigue behavior of long fiber reinforced thermoplastic (LFT) composites

Goel, A., Chawla, K. K., Vaidya, U. K. & Chawla, N., 2007, International SAMPE Symposium and Exhibition (Proceedings). Vol. 52.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermoplastics
Fatigue of materials
Fibers
Composite materials
Polypropylenes
4 Citations (Scopus)

Fatigue crack growth of prealloy Fe-0.85Mo-2Ni-0.6C steels with a homogeneous microstructure

Deng, X., Piotrowski, G. B., Chawla, N., Narasimhan, K. S. & Marucci, M., 2005, Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005. p. 111-124 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Fatigue crack propagation
cracks
steels
microstructure
8 Citations (Scopus)

Fatigue crack initiation and propagation in ferrous powder metallurgy alloys

Polasik, S. J., Williams, J. J., Chawla, N. & Narasimhan, K. S., 2001, Advances in Powder Metallurgy and Particulate Materials. p. 2042-2056 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powder metallurgy
Crack initiation
Crack propagation
Fatigue of materials
Porosity
2 Citations (Scopus)

High frequency fatigue of continuous fiber reinforced ceramic matrix composites

Chawla, N. & Holmes, J. W., 1997, Proceedings of the Engineering Foundation Conference. Warrendale, PA, United States: Minerals, Metals & Materials Soc (TMS), p. 287-299 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramic matrix composites
Fatigue of materials
Fibers
Composite materials
Ceramic fibers

Influence of aging on the microstructure and mechanical properties of a dual phase powder metallurgy (P/M) steel

Walters, J. L., Williams, J. J., Chawla, N., Schade, C. T., Murphy, T. F. & Narasimhan, K. S., 2009, Advances in Powder Metallurgy and Particulate Materials - 2009, Proceedings of the 2009 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2009. p. 1080-1085 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel powder metallurgy
powder metallurgy
Aging of materials
steels
mechanical properties

In situ three dimentional (3D) x-ray synchrotron tomography of corrosion fatigue in A17075 alloy

Singh, S. S., Williams, J. J., Xiao, X., De Carlo, F. & Chawla, N., 2013, Fatigue of Materials II: Advances and Emergences in Understanding, Held During Materials Science and Technology 2012, MS and T 2012. p. 17-25 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Caustics
Corrosion fatigue
Synchrotrons
Tomography
X rays

In situ three dimentional (3D) X-ray synchrotron tomography of corrosion fatigue in Al7075 alloy

Singh, S. S., Williams, J. J., Xiao, X., De Carlo, F. & Chawla, N., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1430-1438 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Caustics
Corrosion fatigue
Synchrotrons
Tomography
X rays
1 Citation (Scopus)

Mechanical and electrical issues concerning the use of composite materials for the supporting core in transmission line conductors

Gorur, R. S., Chawla, N., Hunt, J. & Dyer, M., 2006, Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP. p. 501-504 4 p. 4105480

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric lines
Composite materials
Steel

Microstructure-based finite element modeling of particle reinforced metal matrix composites

Chawla, N. & Chawla, K. K., 2007, ICCM International Conferences on Composite Materials.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical elements
Metals
Microstructure
Composite materials
Anisotropy

Modeling of particle reinforced metal matrix composites using actual microstructures

Chawla, N. & Chawla, K. K., 2006, International SAMPE Technical Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metals
Microstructure
Composite materials
Anisotropy
Particle reinforced composites

Monotonic and cyclic fatigue behavior of a high performance ceramic fiber

Kerr, M., Williams, J. J., Chawla, N. & Chawla, K. K., 2002, Materials Research Society Symposium - Proceedings. Vol. 702. p. 223-228 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramic fibers
Fatigue of materials
Fibers
Aspect ratio
Tensile strength

Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of heterogeneous materials

Chawla, N. & Ganesh, V. V., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 2. p. 1006-1011 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

visualization
microstructure
Visualization
Particle reinforced composites
Microstructure

What's new in finite element modeling of particle reinforced metal matrix composites?

Chawla, N. & Chawla, K. K., 2006, TMS Annual Meeting. Vol. 2006. p. 293-307 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical elements
Metals
matrix
metal
microstructure