Research Output 1970 2019

Filter
Conference contribution
2013

Flexural over-strength factor for epoxy resin materials

Yekani Fard, M. & Chattopadhyay, A., 2013, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Epoxy resins
Bending strength
Method of moments
Temperature

Flexural over-strength factor for epoxy resin materials

Yekani Fard, M. & Chattopadhyay, A., 2013, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2013-1906

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Epoxy Resins
Epoxy resins
Bending strength
Method of moments
Temperature

Fracture mechanics based total fatigue life behavior for stitch-bonded polymer matrix composites

Yekani Fard, M., Raji, B. & Chattopadhyay, A., 2013, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polymer matrix composites
Delamination
Fracture mechanics
Fatigue of materials
Composite materials
6 Citations (Scopus)

Full-state feedback of delayed systems using SOS: A new theory of duality

Peet, M., 2013, IFAC Proceedings Volumes (IFAC-PapersOnline). p. 24-29 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

State feedback
Controllers
Time delay

Fully coupled electromechanical elastodynamic model for guided wave propagation analysis

Borkowski, L., Liu, K. & Chattopadhyay, A., 2013, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 8695. 86951W

Research output: Chapter in Book/Report/Conference proceedingConference contribution

elastodynamics
Guided Waves
Guided electromagnetic wave propagation
Elastodynamics
Wave propagation
4 Citations (Scopus)

High fidelity simulation of the spray generated by a realistic swirling flow injector

Li, X., Soteriou, M. C., Kim, W., Cohen, J. M., Herrmann, M., Ham, F., Kim, D., Le, H. & Spyropoulos, J. T., 2013, Proceedings of the ASME Turbo Expo. Vol. 1 B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Swirling flow
Air
Atomization
Physics
Atomizers
1 Citation (Scopus)

High mobility IGZO/ITO double-layered transparent composite electrode: A thermal stability study

Dhar, A. & Alford, T., 2013, Materials Research Society Symposium Proceedings. Materials Research Society, Vol. 1577. p. 54-59 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tin oxides
indium oxides
Indium
tin oxides
Thermodynamic stability

Hybrid Fabrics as reinforcements for cement-based elements

Cohen, Z., Peled, A. & Mobasher, B., 2013, fib Symposium TEL-AVIV 2013: Engineering a Concrete Future: Technology, Modeling and Construction, Proceedings. lsraeli Association of Construction and lnfrastructure Engineers (IACIE) and Faculty of Civil and Environmental Engineering, Technion - lsrael lnstitute of Technology, p. 105-108 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reinforcement
Cements
Composite materials
Tensile properties
Polypropylenes
16 Citations (Scopus)

Hybrid model predictive control for optimizing gestational weight gain behavioral interventions

Dong, Y., Rivera, D., Downs, D. S., Savage, J. S., Thomas, D. M. & Collins, L. M., 2013, Proceedings of the American Control Conference. p. 1970-1975 6 p. 6580124

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model predictive control
Weight control
Public health
Education
Controllers

Identification of affine linear parameter varying models for adaptive interventions in fibromyalgia treatment

Lopes Dos Santos, P., Deshpande, S., Rivera, D., Azevedo-Perdicoulis, T. P., Ramos, J. A. & Younger, J., 2013, Proceedings of the American Control Conference. p. 1976-1981 6 p. 6580125

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)
Dynamical systems
Scheduling
Derivatives

Identification of LPV state space systems by a separable least squares approach

Lopes Dos Santos, P., Azevedo-Perdicoúlis, T. P., Ramos, J. A., Martins De Carvalho, J. L. & Rivera, D., 2013, Proceedings of the IEEE Conference on Decision and Control. Institute of Electrical and Electronics Engineers Inc., p. 4104-4109 6 p. 6760518

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Least Squares
State Space
Output
Scheduling
Minimise
1 Citation (Scopus)

Image theory for plasmon-modified luminescence near nanospheres

Zhang, Z., Lim, D. & Diaz, R., May 30 2013, Colloidal Nanocrystals for Biomedical Applications VIII. Vol. 8595. 859508

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanospheres
Electromagnetic Phenomena
Luminescence
Metals
Radiation

Impact of acids on the structure of linde type a zeolites for use in reverse osmosis membranes for wastewater recovery

Jamieson, H., Waller, A., Yin, H. & Thomas, M., 2013, Separations Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future. AIChE, p. 430-431 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zeolites
Osmosis membranes
Reverse osmosis
Wastewater
Membranes

Incorporating 2D quantum effects into full band Monte Carlo simulations of QWFETs

Marino, F. A., Tierney, B., Akis, R., Saraniti, M. & Goodnick, S., 2013, Proceedings of the IEEE Conference on Nanotechnology. p. 67-70 4 p. 6721009

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Field effect transistors
Semiconductor quantum wells
field effect transistors
Simulators
quantum wells

Influence of grain boundary structure on interfacial fracture under tensile loading: Cohesive zone model informed by atomistic simulations

Adlakha, I., Solanki, K. & Tschopp, M. A., 2013, TMS Annual Meeting. p. 753-758 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain boundaries
grain boundaries
Molecular dynamics
simulation
molecular dynamics

Influence of yttrium on creep behavior in nano-crystalline magnesium using molecular dynamics simulation

Bhatia, M. A. & Solanki, K., 2013, Magnesium Technology. p. 21-26 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yttrium
Magnesium
Molecular dynamics
Creep
Crystalline materials

In situ three dimentional (3D) x-ray synchrotron tomography of corrosion fatigue in A17075 alloy

Singh, S. S., Williams, J. J., Xiao, X., De Carlo, F. & Chawla, N., 2013, Fatigue of Materials II: Advances and Emergences in Understanding, Held During Materials Science and Technology 2012, MS and T 2012. p. 17-25 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Caustics
Corrosion fatigue
Synchrotrons
Tomography
X rays
2 Citations (Scopus)

Just-in-time-teaching with interactive frequent formative feedback (JiT-TIFFF or JTF) for cyber learning in core materials courses

Krause, S., Baker, D. R., Carberry, A., Koretsky, M., Brooks, B. J., Gilbuena, D., Waters, C. & Ankeny, C. J., 2013, ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Students
Feedback
Warehouses
Chemical engineering

Limiting efficiency of silicon based nanostructure solar cells for multiple exciton generation

Lee, J., Goodnick, S. & Honsberg, C., 2013, Conference Record of the IEEE Photovoltaic Specialists Conference. Institute of Electrical and Electronics Engineers Inc., p. 1046-1049 4 p. 6744320

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Excitons
Nanostructures
Solar cells
Silicon
Quantum yield
4 Citations (Scopus)

Linearity analysis of millimeter wave GaN power transistors through X-parameters and TCAD device simulations

Guerra, D., Saraniti, M., Ferry, D. K. & Goodnick, S., 2013, IEEE MTT-S International Microwave Symposium Digest. 6697725

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wave power
Millimeter waves
millimeter waves
linearity
transistors

Loss and size minimization of surface plasmon polariton nanolasers in near infrared

Li, D. B., Ding, K. & Ning, C-Z., 2013, CLEO: QELS_Fundamental Science, CLEO:QELS FS 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polaritons
Infrared radiation
optimization
Semiconductor materials

Loss and size minimization of surface plasmon polariton nanolasers in near infrared

Li, D. B., Ding, K. & Ning, C-Z., 2013, 2013 Conference on Lasers and Electro-Optics, CLEO 2013. IEEE Computer Society, 6833955

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Infrared radiation
Semiconductor materials

Loss and size minimization of surface plasmon polariton nanolasers in near infrared

Li, D. B., Ding, K. & Ning, C-Z., 2013, CLEO: Applications and Technology, CLEO_AT 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polaritons
Infrared radiation
optimization
Semiconductor materials

Loss and size minimization of surface plasmon polariton nanolasers in near infrared

Ning, C-Z., Li, D. B. & Ding, K., 2013, CLEO: Science and Innovations, CLEO_SI 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

polaritons
Infrared radiation
optimization
Semiconductor materials
15 Citations (Scopus)

Mapping human to robot motion with functional anthropomorphism for teleoperation and telemanipulation with robot arm hand systems

Liarokapis, M. V., Artemiadis, P. & Kyriakopoulos, K. J., 2013, IEEE International Conference on Intelligent Robots and Systems. p. 2075 1 p. 6696638

Research output: Chapter in Book/Report/Conference proceedingConference contribution

End effectors
Remote control
Robots
Inverse kinematics
Redundancy
2 Citations (Scopus)

Microstructural effects on thermal conductivity of uranium oxide: A 3-D multi-physics simulation

Lim, H. C., Rudman, K., Krishnan, K., McDonald, R., Peralta, P., Dickerson, P., Byler, D., Stanek, C. & McClellan, K. J., 2013, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 6 B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Uranium
Thermal conductivity
Physics
Oxides
Mass transfer

Mid-infrared lasing in a single lead sulfide subwavelength wire at 180 K

Fan, F., Liu, Z., Sun, M., Nichols, P. L., Turkdogan, S. & Ning, C-Z., 2013, 2013 Conference on Lasers and Electro-Optics, CLEO 2013. IEEE Computer Society, 6833190

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lead
Wire
Infrared radiation
Wavelength
Temperature
1 Citation (Scopus)

Mid-infrared lasing in a single lead sulfide subwavelength wire at 180 K

Fan, F., Liu, Z., Sun, M., Patricia, L. N., Turkdogan, S. & Ning, C-Z., 2013, CLEO: Science and Innovations, CLEO_SI 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

lead sulfides
lasing
Lead
wire
Wire

Modeling dilute gas-solid turbulent flows using moment methods

Dunn, D. M. & Squires, K., 2013, Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future. AIChE, Vol. 2. p. 691 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Method of moments
Turbulent flow
Gases
10 Citations (Scopus)

Muddiest point formative feedback in core materials classes with youtube, blackboard, classwarm-ups andword clouds

Krause, S., Baker, D. R., Carberry, A., Koretsky, M., Brooks, B. J., Gilbuena, D., Waters, C. & Ankeny, C. J., 2013, ASEE Annual Conference and Exposition, Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Feedback
Teaching
Warehouses
Chemical engineering

Multiscale simulations of wax deposition processes in petroleum pipeline flows

Gale, Y., Herrmann, M. & Chen, K., 2013, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM. Vol. 1 C.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Petroleum pipelines
Pipe flow
Waxes
Crystals
Crude oil
1 Citation (Scopus)

Non-destructive evaluation of composite adhesive kissing bond

Liu, Y., Johnston, J. & Chattopadhyay, A., 2013, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adhesive joints
Stress concentration
Adhesives
Composite materials
Structural integrity
3 Citations (Scopus)

Nonlinear reduced order modeling of complex wing models

Wang, X. Q., Perez, R. A., Mignolet, M., Capillon, R. & Soize, C., 2013, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2013-1520

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)
8 Citations (Scopus)

Nonlinear reduced order modeling of complex wing models

Wang, X. Q., Perez, R. A., Mignolet, M., Capillon, R. & Soize, C., 2013, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)

Nonparametric stochastic modeling of structural uncertainty in rotordynamics: Unbalance and balancing aspects

Murthy, R., Tomei, J. C., Wang, X. Q., Mignolet, M. & El-Shafei, A., 2013, Proceedings of the ASME Turbo Expo. Vol. 7 A. GT2013-95779

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
Uncertainty
Natural frequencies
Experiments
3 Citations (Scopus)

On the benefits of intentional mistuning of friction dampers to reduce the response of tuned and mistuned bladed disks

Murthy, R. & Mignolet, M., 2013, Proceedings of the ASME Turbo Expo. Vol. 7 A. GT2013-95792

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Stiffness
Wear of materials
Costs

On the effects of blade-disk interface mistuning on the response of integrated bladed rotors

Avalos, J., Wang, X. Q., Murthy, R. & Mignolet, M., 2013, Proceedings of the ASME Design Engineering Technical Conference. American Society of Mechanical Engineers, Vol. 8.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blade
Rotor
Rotors
Stiffness matrix
Turbomachine blades
6 Citations (Scopus)

Optimal input signal design for data-centric estimation methods

Deshpande, S. & Rivera, D., 2013, Proceedings of the American Control Conference. p. 3924-3929 6 p. 6580439

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization of finite element modeling of woven fabric ballistic impact

Zhu, D., Mobasher, B. & Rajan, S., 2013, Proceedings - 27th International Symposium on Ballistics, BALLISTICS 2013. DEStech Publications Inc., Vol. 2. p. 1608-1616 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Modeling
Ballistics
Optimization
LS-DYNA
Subroutines
1 Citation (Scopus)

Optimization of IGZO/Cu/IGZO multilayers as transparent composite electrode on flexible substrate by room-temperature sputtering and post-deposition anneals

Dhar, A. & Alford, T., 2013, Materials Research Society Symposium Proceedings. Materials Research Society, Vol. 1577. p. 48-53 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sputtering
Multilayers
sputtering
Electrodes
Electric properties

Osborne reynolds' pipe flow: Direct computation from laminar through transition to fully-developed turbulence

Wu, X., Moin, P., Adrian, R., Baltzer, J. B. & Hickey, J. P., Jan 1 2013, International Symposium on Turbulence and Shear Flow Phenomena, TSFP 2013. TSFP-8, Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipe flow
Turbulence
Fluid mechanics
Turbulent flow
Boundary layers
8 Citations (Scopus)

Paper no 5.1: Highly efficient blue-green OLEDs from tetradentate cyclometalated platinum complexes

Ecton, J., Fleetham, T., Hang, X. & Li, J., 2013, 33rd International Display Research Conference 2013, EuroDisplay 2013. Blackwell Publishing Ltd, Vol. 44. p. 152-155 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Organic light emitting diodes (OLED)
Platinum
Quantum efficiency
Lighting
Display devices
1 Citation (Scopus)

Passivation in non-random solid solution alloys

Artymowicz, D., Sieradzki, K. & Newman, R. C., 2013, ECS Transactions. 21 ed. Electrochemical Society Inc., Vol. 53. p. 15-22 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Passivation
Solid solutions
Nuclear energy
Corrosion
Atoms

Physics-based predictive modeling of atmospheric optical turbulence layers: Solution of paraxial wave equation for inhomogeneous media in linear and quadratic approximation

Mahalov, A., 2013, Optics InfoBase Conference Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wave equations
wave equations
Refractive index
Turbulence
Physics

Platinum azaporphyrins for near infrared organic light emitting diodes

Huang, L., Fleetham, T. & Li, J., 2013, Optics InfoBase Conference Papers. Optical Society of America

Research output: Chapter in Book/Report/Conference proceedingConference contribution

renewable energy
Organic light emitting diodes (OLED)
Platinum
emitters
platinum

Post fatigue and fatigue fracture behavior of stitchbonded biaxial carbon epoxy composites

Yekani Fard, M., Raji, B. & Chattopadhyay, A., 2013, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA 2013-1877

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon
Fatigue of materials
Composite materials
Laminates
Energy release rate

Post fatigue and fatigue fracture behavior of stitchbonded biaxial carbon epoxy composites

Yekani Fard, M., Raji, B. & Chattopadhyay, A., 2013, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Carbon
Composite materials
Laminates
Energy release rate
1 Citation (Scopus)

Prediction of scour depth around bridge piers using Gaussian process

Neerukatti, R. K., Kim, I., Yekani Fard, M. & Chattopadhyay, A., 2013, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 8692. 86922Z

Research output: Chapter in Book/Report/Conference proceedingConference contribution

wharves
Bridge piers
Scour
Gaussian Process
Prediction

Probabilistic defect size and location diagnosis algorithm based on bayesian updating

Peng, T., Wang, L., Zhang, J., Xiang, Y. & Liu, Y., 2013, Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013. p. 2471-2479 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damage detection
Defects
Surface waves
Wave propagation
Aluminum
1 Citation (Scopus)

Probabilistic delamination diagnosis of composite materials using a novel Bayesian imaging method

Peng, T., Saxena, A., Goebel, K., Sankararaman, S., Xiang, Y. & Liu, Y., 2013, PHM 2013 - Proceedings of the Annual Conference of the Prognostics and Health Management Society 2013. Prognostics and Health Management Society, p. 141-149 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bayes Theorem
Delamination
Carbon
Imaging techniques
Damage detection