Research Output

Filter
Conference contribution
1986

AUTOMATED GROUP TECHNOLOGY PART CODING FROM A THREE-DIMENSIONAL CAD DATABASE.

Henderson, M., 1986, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. Lu, S. C-Y. & Komanduri, R. (eds.). New York, NY, USA: ASME, Vol. 24. p. 195-204 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

EXTRACTION AND ORGANIZATION OF FORM FEATURES.

Henderson, M., Dec 1 1986, Unknown Host Publication Title. Crestin, J. P. & McWaters, J. F. (eds.). North-Holland, p. 547-557 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations
1987

IDENTIFICATION OF THE KNEE JOINT IN VARUS-VALGUS AND LONGITUDINAL ROTATIONS IN LABORATORY AND SNOW SKIING EXPERIMENTS.

Kuo, C-Y. & Mote, C. D., Dec 1 1987, ASTM Special Technical Publication. Mote, C. D. J. & Johnson, R. J. (eds.). ASTM, p. 5-26 22 p. (ASTM Special Technical Publication).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

IMPROVED GRADIENT-TYPE ALGORITHMS FOR OPTIMAL CONTROL PROBLEMS.

Kuo, C. F. & Kuo, C-Y., 1987, Proceedings of the American Control Conference. American Automatic Control Council, p. 1984-1990 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1988

Experimental study of nonlinear robust robot motion control

Kuo, C-Y. & Jeng, P., 1988, Proc USA Jpn Symp Flexible Autom Crossing Bridges Adv Flexible Autom Rob. New York, NY, United States: Publ by American Soc of Mechanical Engineers (ASME), p. 189-196 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

FRAPP: Automated feature recognition and process planning from solid model data

Henderson, M. & Chang, G. J., 1988, Unknown Host Publication Title. New York, NY, United States: Publ by American Soc of Mechanical Engineers (ASME), p. 529-536 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

41 Scopus citations

MA to ARMA two-stage Monte Carlo simulation

Mignolet, M. & Spanos, P. D., Dec 1 1988, Probab Methods Civ Eng Proc 5th ASCE Spec Conf. Publ by ASCE, p. 265-268 4 p. (Probab Methods Civ Eng Proc 5th ASCE Spec Conf).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1989

Active control of mechanical vibrations in a circular disk

Kuo, C-Y. & Huang, C. C., 1989, Proc 1989 Am Control Conf. Piscataway, NJ, United States: Publ by IEEE, p. 2779-2784 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Some insight in autoregressive (AR) spectral modeling

Mignolet, M. & Spanos, P. D., Dec 1 1989, Proc ICOSSAR 89 5th Int Conf Struct Saf Reliab. Publ by ASCE, p. 1145-1152 8 p. (Proc ICOSSAR 89 5th Int Conf Struct Saf Reliab).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1990

Probabilistic analysis of mistuned bladed disks: A combined closed form-perturbation approach

Mignolet, M. & Christensen, K. R., 1990, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; General. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Probabilistic analysis of mistuned bladed disks. A combined closed form-perturbation approach

Mignolet, M. & Christensen, K. R., 1990, American Society of Mechanical Engineers (Paper). Publ by ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Three-dimensional shock fitting for transonic rotor acoustics

Vincent, T. E., Wells, V. & Rutherford, J. W., May 1990, Annual Forum Proceedings - American Helicopter Society. Publ by American Helicopter Soc, Vol. 1. p. 379-386 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1991

Simulation of homogeneous two-dimensional random fields. Part I. AR and ARMA models

Mignolet, M. & Spanos, P. D., 1991, American Society of Mechanical Engineers (Paper). Anon (ed.). Publ by ASME, p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation of homogeneous two-dimensional random fields. Part II. MA and ARMA models

Spanos, P. D. & Mignolet, M., 1991, American Society of Mechanical Engineers (Paper). Anon (ed.). Publ by ASME, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1992

Efficient control of a flexible robot arm by shaped inputs

Kuo, C. F. & Kuo, C-Y., Dec 1 1992, Active Control of Noise and Vibration - 1992. Publ by ASME, p. 261-270 10 p. (American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Exact expression for the distribution of linear combinations of uniform random variables

Lin, C. C. & Mignolet, M., Dec 1 1992, Probabilistic Mechanics and Structural and Geotechnical Reliability, Proceedings of the Specialty Conference. Publ by ASCE, p. 555-558 4 p. (Probabilistic Mechanics and Structural and Geotechnical Reliability, Proceedings of the Specialty Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exact nonstationary response of a sliding rigid structure to a modulated white noise base excitation

Mignolet, M. & Fan, G. W., Dec 1 1992, Probabilistic Mechanics and Structural and Geotechnical Reliability, Proceedings of the Specialty Conference. Publ by ASCE, p. 408-411 4 p. (Probabilistic Mechanics and Structural and Geotechnical Reliability, Proceedings of the Specialty Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fiber clustering during the curing of composite materials

Mignolet, M., 1992, American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Publ by ASME, Vol. 132. p. 173-185 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fiber suppressed localization in tension

Mobasher, B. & Shah, S. P., Jan 1 1992, Proceedings of Engineering Mechanics. Publ by ASCE, p. 868-871 4 p. (Proceedings of Engineering Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Lor-based least-squares output feedback control of rotor vibrations using the complex mode and balanced realization methods

Fan, G. W., Nelson, H. D., Crouch, P. E. & Mignolet, M., Jan 1 1992, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers, (ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition, GT 1992; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Modeling and simulation of nonlinear dynamics in a flexible robot arm

Kuo, C. F. & Kuo, C-Y., Dec 1 1992, Active Control of Noise and Vibration - 1992. Publ by ASME, p. 149-156 8 p. (American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Multidisciplinary optimization of helicopter rotor blades including design variable sensitivity

McCarthy, T. R. & Chattopadhyay, A., 1992, 4th Symposium on Multidisciplinary Analysis and Optimization, 1992. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 92-4783

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Optimum design of high speed prop-rotors using a multidisciplinary approach

Chattopadhyay, A. & Narayan, J. R., 1992, Annual Forum Proceedings - American Helicopter Society. Publ by American Helicopter Soc, Vol. 2. p. 1167-1177 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Scopus citations

The combined closed form-perturbation approach to the analysis of mistuned bladed disks

Mignolet, M. & Lin, C. C., Jan 1 1992, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers, (ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition, GT 1992; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1993

Application of energy-filtered imaging to the characterization of heterogeneous catalysts

Crozier, P. & McCartney, M., 1993, Proceedings - Annual Meeting, Microscopy Society of America. Publ by San Francisco Press Inc, p. 724-725 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of damping and damping mistuning on the forced vibration response of bladed disks

Lin, C. C. & Mignolet, M., 1993, American Society of Mechanical Engineers (Paper). Publ by ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Effects of damping and damping mistuning on the forced vibration response of bladed disks

Lin, C. C. & Mignolet, M., Jan 1 1993, General. American Society of Mechanical Engineers, (ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993; vol. 3A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multistage ARMAX identification of structures

Mignolet, M., Red-Horse, J. R. & Lin, C. C., 1993, Collection of Technical Papers - AIAA/ASME Structures, Structural Dynamics and Materials Conference. pt 6 ed. Publ by AIAA, p. 3366-3374 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Natural frequencies and mode shapes of flexible spinning beams

Eick, C. D. & Mignolet, M., 1993, Collection of Technical Papers - AIAA/ASME Structures, Structural Dynamics and Materials Conference. pt 4 ed. Publ by AIAA, p. 2130-2137 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantitative analysis of low-dose high-resolution images and diffraction patterns from zeolites using a slow-scan CCD camera

Pan, M. & Crozier, P., 1993, Proceedings - Annual Meeting, Microscopy Society of America. Publ by San Francisco Press Inc, p. 670-671 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Representing functionality and design intent in product models

Henderson, M., Dec 1 1993, Proc 2 Symp Solid Model Appl. Anon (ed.). Publ by ACM, p. 387-396 10 p. (Proc 2 Symp Solid Model Appl).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

27 Scopus citations
1994

A discrete semi-analytical procedure for aerodynamic sensitivity analysis including grid sensitivity

Pagaldipti, N. & Chattopadhyay, A., 1994, 5th Symposium on Multidisciplinary Analysis and Optimization, 1994. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 161-169 9 p. AIAA-94-4268-CP

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

ARMAX identification of vibrating structures: model and model order estimation

Mignolet, M. & Red-Horse, J. R., 1994, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA, Vol. 3. p. 1628-1637 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Scopus citations

Design sensitivity analysis technique for composites undergoing finite elastoplastic deformation

Chattopadhyay, A. & Guo, R., 1994, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA, Vol. 3. p. 1742-1752 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Forced response of mistuned bladed disks: Identification and prediction

Lin, C. C. & Mignolet, M., Jan 1 1994, Structural Dynamics and Vibrations. Faghri, A. & Yaghoubi, M. A. (eds.). 7 ed. Publ by ASME, p. 135-142 8 p. (American Society of Mechanical Engineers, Petroleum Division (Publication) PD; vol. 64, no. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

In situ STM investigation of Stranski-Krastanov growth of Ag on Au(111) electrodes

Corcoran, S. G., Chakarova, G. S. & Sieradzki, K., Jan 1 1994, Mechanisms of Thin Film Evolution. Desu, S. B., Beach, D. B., Wessels, B. W. & Gokoglu, S. (eds.). Publ by Materials Research Society, p. 103-109 7 p. (Materials Research Society Symposium Proceedings; vol. 317).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

New higher-order plate theory in modeling delamination buckling of composite laminates

Gu, H. & Chattopadhyay, A., 1994, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA, Vol. 1. p. 504-513 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Roles of features and abstraction in mechanical design

Taylor, L. E. & Henderson, M., 1994, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. New York, NY, United States: ASME, Vol. 68. p. 131-140 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations
1995

Adaptive perturbation scheme for the analysis of mistuned bladed disks

Lin, C. C. & Mignolet, M., 1995, American Society of Mechanical Engineers (Paper). Anon (ed.). ASME

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An adaptive perturbation scheme for the analysis of mistuned bladed disks

Lin, C. C. & Mignolet, M., 1995, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Coupled rotor/wing optimization procedure for high speed tilt-rotor aircraft

McCarthy, T. R., Chattopadhyay, A. & Zhang, S., 1995, Annual Forum Proceedings - American Helicopter Society. American Helicopter Soc, Vol. 2. p. 924-936 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations

Delamination buckling and postbuckling of composite cylindrical shells

Gu, H. & Chattopadhyay, A., 1995, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 5. p. 3095-3105 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a finite element based design sensitivity analysis for buckling and postbuckling of composite plates

Guo, R. & Chattopadhyay, A., 1995, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 2. p. 1119-1131 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Development of a higher order laminate theory for modeling composites with induced strain actuators

Seeley, C. E. & Chattopadhyay, A., Jan 1 1995, Proceedings of SPIE - The International Society for Optical Engineering. Society of Photo-Optical Instrumentation Engineers, p. 314-326 13 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Development of a polymeric piezoelectric C-block actuator using a hybrid optimization technique

Seeley, C. E., Chattopadhyay, A. & Brei, D., 1995, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 5. p. 3285-3295 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integrated aerodynamics and heat transfer optimization procedure for turbine blade design

Narayan, J. R., Chattopadhyay, A., Pagaldipti, N. & Zhang, S., 1995, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Vol. 5. p. 2973-2982 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Optimization of the twist distribution using an adaptive airfoil

Roglin, R. L., Hanagud, S. V., Peters, D. A. & Chattopadhyay, A., 1995, Annual Forum Proceedings - American Helicopter Society. American Helicopter Soc, Vol. 2. p. 957-964 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization procedure for improved sonic boom and aerodynamic performance using a multiobjective formulation technique

Narayan, J. R., Chattopadhyay, A., Pagaldipti, N. & Cheung, S. H., 1995, 33rd Aerospace Sciences Meeting and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 95-0127

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Optimization procedure for reduced sonic boom in high speed flight

Chattopadhyay, A., Narayan, J. R., Pagaldipti, N., Wensheng, X. & Cheun, S. H., 1995, 1995 Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
1996

Acoustic methodology for use in the conceptual design of rotorcraft

Wells, V., Bona, J. V. & Glinka, A. T. IV., 1996, Annual Forum Proceedings - American Helicopter Society. American Helicopter Soc, Vol. 1. p. 259-265 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution